KTI Networks KS-116 User manual

16/24-Port 10/100 Workgroup
Fast Ethernet Switches
KS-116, KS-124
Specifications:
FCC Part 15'Class B
CISPR 22 Class B
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,Hsi-
chih, Taipei Hsien, Taiwan.
Te l :886-2-2698-3878
Fax:[phone]
E-mail:[email protected]
URL:http://www.ktinet.com.tw
KTI Networks Inc.
7400 Harwin Dr., Suite 120 Houston, Texas
77036 U.S.A.
Te l :713-266-3891
Fax:[phone]
E-mail:[email protected]
URL:http://www.ktinet.com
Trademarks: All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.
080110
Key Features :
 Provide 16/24 10/100Mbps Fast Ethernet ports
 All ports support auto-negotiation and auto-MDI/MDI-X detection
 Support full/half-duplex transfer mode for 10/100Mbps
 Wire speed reception and transmission
 Store-and-Forward switching method
 Self learning for active MAC addresses up to 8K entries
 Supports IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half-
duplex mode
Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Number of Ports 16/24 x 10/100Mbps auto-negotiation & auto-MDI/MDI-X ports
Network Ports 10Base-T : Cat.3, 4, 5 or higher ( 100 meters max. )
100Base-TX : Cat.5, 5e or higher ( 100 meters max. )
Network Data Ethernet : 10Mbps (Half-duplex) 20Mbps (Full-duplex)
Transfer Rate Fast Ethernet : 100Mbps (Half-duplex) 200Mbps (Full-duplex)
MAC Address Table 8K entries
LEDs Per Unit : Power
Per Port : Link/ACT, and speed
Environment Operating temperature : 0OC ~ 40OC
Storage temperature : -20OC ~ 70OC
Humidity : 10% ~ 90%RH non-condensing
Dimension 283 x 178 x 45 mm (WxDxH)
Power 100-240VAC, 50-60Hz
Power KS-116: 6 watts. (max.)
Consumption KS-124: 6.4 watts. (max.)
Approval FCC Class B, CE mark Class B
Ordering Informaton:
KS-116 Ver.D 16-Port 10/100 Workgroup Fast Ethernet Switches
KS-124 Ver.E 24-Port 10/100 Workgroup Fast Ethernet Switches