KTI Networks KGS-0500 User manual

5-Port GbE Switch with 1 GbE SFP
User’s Guide
1. Features
●Provides four tri-speed copper ports and one 1000M SFP
●All copper ports support auto-negotiation and auto-MDI/MDI-X detection
●Supports 802.3x flow control for full-duplex and backpressure for half-duplex
●Supports IEEE802.3az Energy Efficient Ethernet (EEE)
●Supports jumbo frame length of 9216 bytes at full wire speed forwarding
●Supports link-up cable length power saving and link-down power saving
2. LED Indicator
Power
‧Green (ON): Power is on
‧Green (OFF): Power is off
LAN Port 1~4
‧Green (ON): indicate the port is operating at 1000Mbps
‧Green (Blink): indicate the activity is occurring
‧Orange (ON): indicate the port is operating at 10/100Mbps
‧Orange (Blink): indicate the activity is occurring
SFP
‧Green (ON): indicate the port is operating
‧Green (Blink): indicate the activity is occurring
3. Back Panel
1

4. Application
5. Technical Specifications
Hardware
Standard IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X,
IEEE 802.3x Flow Control
Network Ports 4 10/100/1000Mbps Gigabit copper ports:
Shielded RJ-45, auto-negotiation, auto-MDI/MDI-X support
1 1000Mbps Gigabit fiber SFP port:
SFP supports standard SFP fiber transceiver installation
Network Cables 10/100/1000Mbps Copper: Cat. 5, 5e, 6 or higher up to 100m
1000Base-X: MMF 50/125μm, 60/125μm, SMF 9/125μm
MAC Address Table 2K entries
Buffer Memory 128K bytes
Dimension 147 x 105 x 28mm (W x D x H)
Mounting Support Wall, Magnetic
Power Input +5V via external power adapter
Temperature Operating: 0° ~ 40°C
Storage: -20° ~ 70°C
Humidity 10% ~ 90% (non-condensing)
Certifications CE/FCC compliance
RoHS RoHS compliance
DOC.150908
2