Kudux Smart Spot 100 LED User manual

Manual instruction
V1.1
Moving Head
Smart Spot 100 LED
! Please read the manual before installing and using this lighting
Keep it for future reference

www.kudux.pl Smart Spot 100 LED 2
Thank you for purchasing our device.
We make every effort to ensure the best quality
of our products and to meet your expectations.
If you have any remarks or comments, please
share them with us.
We will be grateful for any suggestions that will
help us make products that are even better and
devices that satisfy your needs.
R&D Team

www.kudux.pl Smart Spot 100 LED 3
Table of contents
1. General Information:................................................................................................................................. 4
2. Safety Instructions..................................................................................................................................... 4
3. Technical Specifications............................................................................................................................. 6
4. Interface Description................................................................................................................................. 6
5. Sub interface.............................................................................................................................................. 7
6. DMX Channel Table ................................................................................................................................. 10
7. DMX Channel descriptions ...................................................................................................................... 10
8. Cleaning ................................................................................................................................................... 14
9. Contact: ................................................................................................................................................... 14

www.kudux.pl Smart Spot 100 LED 4
1. General Information:
Thank you very much for choosing our product. For safety purpose, please read this manual
carefully before your operation. This manual included installation and using information. Please
install and operate it according to this manual.
Unpacking: Once receive it, please handle it carefully and check if there is some shatter because of
transportation and the following fittings are OK.
In the carton, there are four things available:
Moving head light: 1PC
Power cable: 1PC
Fast Lock: 1PC
User manual: 1 PC
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself.
Doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact us.
2. Safety Instructions
⚫Please keep this User Guide for future consultation. If you sell the unit to another user, be sure
that they also receive this instruction booklet.
⚫Unpack and check carefully there is no transportation damage before using the unit.
⚫Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
⚫It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
⚫The unit is for indoor use only. Use only in a dry location.
⚫The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces. Be sure that no ventilation slots are blocked.
⚫Disconnect main power before replacement or servicing.
⚫Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

www.kudux.pl Smart Spot 100 LED 5
⚫Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but
always by taking its base.
⚫Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is
higher than this.
⚫Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand during
its operation. Turn off the power and allow about 15 minutes for the unit to cool down before
replacing or serving.
⚫In the event of serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type
spare parts.
⚫DO NOT touch any wire during operation as high voltage might be causing electric shock.
Warning:
⚫To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
⚫DO NOT open the unit within five minutes after switching off.
⚫The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs
yourself. In the unlikely event your unit may require service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly
fixed to avoid vibration and slipping while operating. And make sure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also
always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the
touch of people and has no one pass by or under it.

www.kudux.pl Smart Spot 100 LED 6
3. Technical Specifications
Voltage: AC100-240V,50-60Hz
Power Consumption: 150W
DMX Channel: 14 CH
LED Source: ultrabright 100W white LED
Beam Angle: 15°
Lumin: 3420 Lux @ 5m
Control Mode: DMX512, Master/Slave, Auto, Sound.
Support RDM
Color Wheel: 7 colors + white, spilt colors, rainbow effect.
Fixed Gobo Wheel: 7 gobos + blank, rainbow effect, gobo shake.
Rotation Gobo Wheel: 6 glass gobos + blank, Rainbow effect, gobo shake.
Prism: 3-facet or 6-facet prism can adjustable rotating speed and direction.
Movement: Pan: 540° Tilt: 270°, Pan/Tilt speed adjustable.
Strobe: 1-20t/s
Dimmer: 0-100% linear dimming
Focus: motorized focus
Size: 170*237*372 mm
N.W.: 5.9 kg
G.W.: 7.0 kg
4. Interface Description
Main Interface
Top right corner 2 button for screen rotation and language switching.
Bottom row four button corresponding sub interface is introduced, it’s in the back.

www.kudux.pl Smart Spot 100 LED 7
5. Sub interface
Setting
Option
Description
Run Mode
DMX
Slave status: Receive DMX signals
from the console or Master
Sound
Auto run;
Master status: Auto run and send
DMX signal to slave
Random
Auto
DMX Address
001-512
Press “OK” key enter into edit
status, then press “UP” “DOWN”
to change DMX address. press
“OK” key save and exit edit status.
Channel Mode
Std.14CH
Standard 14 Channel Mode
Top Lamp Temp
001-110
Sound Regulator
-006 --- +006
Invert Pan
OFF
ON for starting and ending, the
default is OFF.
ON
Invert Tilt
OFF
ON for starting and ending, the
default is OFF.
ON
Pan-Tilt Swap
OFF
ON
Exchange Pan/Tilt channel
(include Pan/Tilt Fine)
Pan-Tilt Encoder
ON
Use encoder (optocoupler) to
determine out of step and
automatically correct position
OFF
Correct position without encoder
(optocoupler)
RDM
ON
Support RDM function
OFF
No DMX Signal
KEEP
Continue running as it is
CLEAR
All motors return to the position
and stop running.
Display
ON

www.kudux.pl Smart Spot 100 LED 8
OFF
Lamp On@Startup
OFF
ON
Load Default
Press the "OK" button to see the
confirmation dialog, press "OK"
again
The key restores the default
settings
Manual Control
This interface is used to control the current fixture and automatically enters the Master state (does
not receive the DMX signal and sends a DMX signal to the slave).
Option
Description
1. Pan
0-255
Orange indicates selected, Press
“OK” key enter into Edit status,
then press “UP” “DOWN” to
select, press “OK” save and Exit
edit status.
2. Pan Fine
0-255
3. Tilt
0-255
4. Tilt Fine
0-255
5. Pan-Tilt Speed
0-255
6. Dimmer
0-255
7. Shutter/Strobe
0-255
8. Color
0-255
9. Gobo
0-255
10. Gobo 1
0-255
11. Gobo1 RT
0-255
12. Prism
0-255
13. Focus
0-255
14. Reset
Press “OK” to see the confirmation
dialog box, press “OK” again to
enter the reset interface, all motor
reset
System
Option
Description
Lamp Temp

www.kudux.pl Smart Spot 100 LED 9
DMX Monitor
This enters the sub-interface and
displays the channel values as
values for viewing.
System Errors
(See common
mistakes
Rear)
If the red ERR indicator is lit, the
luminaire is running.
An error can be made by going to
the sub-interface for details.
After viewing, you can press the
"Clear" button to clear the error
record.
DIS: J017-J11D-LSPOT-A01
Version No.
N: J017-J11D-LSPOT-A01
Version No.
DATE:
TIME:
Advanced
Password is “Up Up Up Down Down Down”, then press the OK key enter into
the Advanced Interface.
Option
Description
Sensor Monitor
Hall 1-6 State
Hall XY State
Pan Tilt Codewheel State
Pan Codewheel Step
Tilt Codewheel Step
Reset Calibration
Pan Calibration
After entering the sub-
interface, you can adjust the
motor such as X-axis and
Y-axis.
Reset position to
compensate for errors in
hardware installation,
Adjustment range -
128~+127, +0 means no
adjustment.
Tilt Calibration
Color Calibration
Gobo Calibration
Focus Calibration

www.kudux.pl Smart Spot 100 LED 10
Prism Calibration
Rt Gobo Calibration
Zero Point Correction
ON
6. DMX Channel Table
CH
14 Channel Mode
1
Pan
2
Pan Fine
3
Tilt
4
Tilt Fine
5
Pan/Tilt Speed
6
Dimmer
7
Shutter/Strobe
8
Color
9
Fixed Gobo Wheel
10
Rotation Gobo Wheel
11
Gobo rotate
12
Prism
13
Focus
14
Reset
7. DMX Channel descriptions
➢PAN –channel 1
➢PAN FINE –channel 2
➢TILT –channel 3
➢TILT FINE –channel 4