KVM-TEC KT-6851 User manual
2 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
WHY KVM-TEC
gateway
The kvm-tec connection to virtual machines
kvm-tec Gateway - the perfect combination of a Real-Time KVM system and
a exible remote desktop system. The gateway has the function of a thin
client and in combination with MX Local Extender is the ideal combination
with virtual machines in the switching system. With the kvm-tec gateway it is
possible to connect to virtual machines or remote PCs outside the switching
network.
A gateway can connect to virtual machines. 4 Login credentials can be stored
and retrieved by hotkey... In addition to your Real-Time Switching system,
the kvm-tec gateway can be used to access the virtual machines.
Easy installation - rst connect the remote unit, then select the RDP protocol
on the kvm-tec gateway, further enter the login data and connect to the
desired PC.
RDP and VNC are used as standard. Other protocols on request.
Access to virtual
machines in addition
to your Real Time
switching system
Connection to a
PC via RDP/ VNC with
MX Local
gateway powered
by DEBIAN
RDP and VNC standard
intuitive user interface
Virtual
Machines
flexline
www.kvm-tec.com
kvm-tec | 3
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
IN THIS GUIDE
1. Introduction 5
1.1 Intended Use 5
1.2 Safety Instructions 6
1.3 Technical Spezications 8
1.4 About the product - Gateway 9
1.5 About the Status LED 10
1.6 Unpacking and checking the contents 11
1.7 Mounting options 11
1.7.1 Mounting pads and rubber feet 11
2. Installation of the extender 12
2.1 Installing the extender 12
2.2 Quickinstallation Gateway 13
2.3 Operation, Adding General 14
2.4 Operation for RDP 15
2.5 Operation for VNC 16
2.6 Editing a saved connection 17
2.7 Sorting the saved connections 19
2.8 Deleting a saved connection 20
2.9 Quick Favoriting 21
2.10 Connect 22
3. Congure the Extender 23
4 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
IN THIS GUIDE
3.1 Features 23
3.2 Apps 23
3.3 Update 24
3.4 Settings 26
3.5 Exit 26
3.6 Close RDP connection 27
3.7 Close VNC connection 27
3.8 Using the OSD for Gateway connections 28
4. Maintance & Care 30
4.1 Extender care 30
4.2. Disposal 30
5. Warranty 31
5.1. Standard warranty 31
5.2 Extended warranty 31
6. Cable requirements 32
6.1 Requirements for CAT5e/6/7 cables 32
7. Requirements network-switch 33
8. Contacts & phone / emails 34
9. Notes 35
kvm-tec | 5
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
5 | kvm-tec
1. INTRODUCTION
Congratulations on the purchase of your new Gateway KVM Extender. You have bought
a high quality extender. These instructions are part of this product. They contain
important information regarding safety, use and disposal for every user of the Gateway
KVM Extender. Please familiarise yourself with the information within prior to using
your product. Use the product only in the manner as described and for the areas of
application as stated. When passing the product to a third party be sure to also supply all
instructions and other relevant documentation. Following proper use and maintenance,
your Gateway KVM Extender will bring you joy for many years to come.
1.1 INTENDED USE
The kvmtec gateway offers the possibility to connect a PC to a KVM network via a RDP or VNC
remote desktop connection. The gateway is a Linux based device that runs with Debian as
operating system and Free RDP as connection client.
WARNING The device may only be opened by an authorized technician. Danger of electric
shock!
6 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.2 SAFETY INSTRUCTIONS
WARNING! Read and understand all safety instructions.
• Follow all the instructions. This will avoid accidents, re, explosions, electric shocks or
other hazards that may result in damage to property and/or severe or fatal injuries.
Please ensure that everyone who uses the product has read and followed these warnings
and instructions.
• Keep all safety information and instructions for future reference and pass them on to
subsequent users of the product.
• The manufacturer is not liable for cases of material damage or personal injury caused
by incorrect handling or non-compliance with the safety instructions. In such cases, the
warranty will be voided.
• This product is not intended for use by persons (including children) with restricted
physical, sensory or intellectual capability or lack of experience and/or knowledge, unless
they are supervised by a person who is responsible for their safety or provides them with
instructions on how to use the product.
• DANGER! Not for use in potentially explosive environments.
• DANGER! Be vigilant at all times, and always take care around this product. Do not use
electrical equipment if you are lacking in concentration or awareness, or are under the
inuence of drugs, alcohol or medication. Even a moment of inattentiveness can lead to
serious accidents and injuries when using electrical equipment. Check the product and
the cables for any damage before use. If there is any visible damage, a strong odour, or
excessive overheating of components unplug all the connections immediately and stop
using the product.
• If the product is not installed and used in accordance with this manual, it may cause
disruptive interference with radio or television reception or affect other electronic
products in residential areas.
• Use shielded cables only to connect the components in order to avoid such interference.
Non-compliance invalidates the permission to operate this product.
• Only the mains adapter included with the product should be used as the power supply.
Do not use other adapters.
• Prior to connecting to the mains, make sure your local mains voltage matches the rating
indicated on the product.
• The product must be connected to a permanent and earthed AC wall socket.
kvm-tec | 7
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
• Protect cables from being strained, pinched or buckled and place them in a way to
prevent people from tripping over the cord.
• In particular, ensure to avoid damage to the mains adapter.
• Use the product with a suitable, properly installed and easily accessible mains power
socket. Make sure the product can be disconnected from the power socket at all times.
• Unplug the product during electrical storms or when not in use.
• DANGER! Never touch the adapter with wet hands.
• Use the product within the specied performance limits.
• Keep the product away from ammable materials such as curtains and drapes.
• Protect the mains adapter from use by third parties (particularly children). Keep the
unused mains adapter in a dry, elevated or locked location away from children.
• Do not place the product near heaters.
• Do not drop or hit the product.
• Unplug all connections before cleaning the product. Do not use wipes or chemicals
as these could damage the surface. Wipe the housing with a damp cloth. Electrical/
electronic parts must not be cleaned.
• Alterations to the product and technical modications are not permitted.
8 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.3 TECHNICAL SPEZIFICATIONS
Typ: KVM Gateway local/CPU Unit
Modell: kvm-GW KVM Extender
Voltage supply: 12V
Power supply 12VDC1A, external power supply
Operation enironment: 0 ºC to 45 ºC / /32 to 113 °F
Storage environment -25ºC to 80 / /-13 to 176 °F
Relative Luftfeuchtigkeit: max. 80% (non condensing )
Humidity for storage: max. 80% (non condensing)
Housing material: anodized aluminum
Dimension: 198 x 40 x 103,5 mm/ 7.79 x 1.57 x 4.03 inch
Weight: 604 g/1.33 lb Local/CPU
MTBF 82 820 calculated hours / 10 years
kvm-tec | 9
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.4 ABOUT THE PRODUCT - GATEWAY
1. power/status LED display RDP/VNC Status
2. DC connection for 12V/1A power supply
3. LAN connection to LAN
4. reset button for reset
5. kvm-link connection for CAT X cable to
KVM network
6. power/status LED display the extender status
10 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION
1.5 ABOUT THE STATUS LED
LED Status Update:
Color Light display Autoupdate Mode
fast ashing Update runs
shining Update failed
shining Update successful
Bedeutung LED Anzeigen
Color Light display Description
shining only network connection available
fast ashing no active connection
shining no video signal
shining everything works
A detailed error description can be found in chapter First Aid
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved kvm-tec | 11
1.6 UNPACKING AND CHECKING THE CONTENTS
Before using the product for the rst time it should be checked for damage. In case of
damage due to transport inform the carrier immediately. Before delivery the product is
checked for its function and its operating safety.
• Make sure that the packaging contains the following content:
Gateway
Local/CPU Unit
1 x kvm-GW local/CPU
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
4 x rubber feet
1. INTRODUCTION
1.7 MOUNTING OPTIONS
1.7.1 MOUNTING PADS AND RUBBER FEET
The mounting pads and rubber feet can be used to hold the extenders in place and prevents
them from sliding and falling.
To attach the mounting pads or rubber feet:
1. Remove the protection layer from the mounting pads or rubber feet (G).
2. Attach the mounting pads or rubber feet (G) to the bottom the units.
12 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2.1 INSTALLING THE EXTENDER
WARNING! Read and understand all safety information before installing the product.
Easy installation - rst connect the MX or UVX remote unit, then select the RDP or VNC protocol
on the KVM gateway. Then the login data is entered and connected to the desired PC.
2. INSTALLATION OF THE EXTENDER
kvm-tec | 13
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.2 QUICKINSTALLATION GATEWAY
Quick Installation kvm-tec GATEWAY
1. Connect the CON/Remote Unit and the Gateway with the supplied 12V 1A power supply.
2. connect the keyboard and mouse to the remote unit.
3. connect the gateway and the remote unit with a network cable.
4. connect the screen on the remote side with the DVI cable.
5. then connect Remote audio/out to speakers or headphones using the audio cable.
6. connect the gateway to the Internet with a network cable via the Lan port.
HAVE FUN - your kvm-tec Gateway is now ready for all virtual machines !
matrixline
RS232
Power plug
12V 2A
Power plug
12V 1A
Networkcable CAT5e,6,7 up to 150m/492ft
USB from keyboard
and mouse
DVI to Monitor
Audio from
Microphone
Audio toAudio to
speakerspeaker
Internetconnection
14 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.3 OPERATION, ADDING GENERAL
To establish a new connection to a PC, you must rst press the following
button on the main page to add a new connection of your choice (RDP/VNC).
This button takes you to the Add window.
kvm-tec | 15
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.4 OPERATION FOR RDP
To establish an RDP connection to a PC, the following parameters are required:
Name: Freely selectable name (serves only the recognition of the user)
Username: User name of the PC
Password: Password of the user
Server: Server address (e.g. 192.168.0.100 or name of the server)
Domain: Domain name of the RDP server (e.g. RDPTEST)
Reconnect: Disable/enable. Maximum attempts 0-1000 adjustable
(0 corresponds to innite)
Favoritise: Disable/enable. (Serves, in order to be able to sort on the Mainpage, after
sort by favorites.
Once all the parameters are in place, you can press the „Finish Adding“ button to save the
RDP connection.
16 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.5 OPERATION FOR VNC
First, select the VNC connection type:
Now you can enter the following parameters:
Name: Freely selectable name, only serves to recognize the user.
Server: Server address (e.g. 192.168.0.100 or name of the server)
Favoritise: Disable/enable. Used to be able to sort by favorites on the main page.
Once all the parameters are in place, you can press the „Finish Adding“ button to save the VNC
connection.
kvm-tec | 17
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.6 EDITING A SAVED CONNECTION
First you have to select the saved connection you want to edit on the main page.
Selected connections are highlighted in blue, with white text.
Once you have selected a connection, click the following button.
Now you reach the edit window. The data, which were already stored, are taken over, except for
the password!
18 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
Now you can adjust the connection parameters or switch to a VNC connection. The parameters
correspond to those found in the Add window.
When you are done editing, save your input by clicking the “Finish Editing” button.
You will now return to the main page with the updated changes.
kvm-tec | 19
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.7 SORTING THE SAVED CONNECTIONS
If you have already saved some connections, you can lter using the sorting function.
In order to be able to sort now, press on the desired head of a column (except Delete), after
which should be sorted.
If you want to sort e.g. by favorites, click once on „Favorites“. Now the entries are sorted in
ascending order.
20 | kvm-tec Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
If you click on the “Favorites” header again, the entries will be sorted in descending order.
2.8 DELETING A SAVED CONNECTION
To do this, simply press the “trash can” button on the main page, which you will nd in the Delete
column.
Table of contents
Other KVM-TEC Gateway manuals
