Kyocera au GRATINA Service manual

Setting Guide
Introduction
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation
When Using the Product
Note the following when using the product.
●The battery isn't charged adequately at the time of purchase. Charge the battery sufficiently
before use.
●To maintain water and dust resistance, attach the back cover firmly.
●If the confirmation screen such as terms and conditions, etc. appears when you use
applications and functions of the product, follow the on-screen instructions.
●If the confirmation screen for communication charges appears when you use applications
and functions of the product, follow the on-screen instructions.
Initial Settings
At the first time of power-up, a screen for making initial settings is displayed, and you can set
your au ID. "au ID" identifies the customer who uses au services. Register your au phone
number as your au ID. By setting an au ID, you can use various services provided by au such
as "au スマートパス (au Smart Pass)", "My au", and "au WALLET".
●From the standby screen, press k → [Settings] → [au ID Setting] to set.
kConfirm the contents
→ k
Confirm the contents
→ k
kConfirm the contents
→ [OK]
The confirmation screen
for "au ID利用規約" (au ID
Terms of Use) appears
→ [同意して次へ (Agree
and Next)]
* At the first time of
registering au ID, follow
the on-screen
instructions.
au ID setting is
complete
* Continue by following the
on-screen instructions.
To exit the setting, .
→ [はい (Yes)]
To Enter Numbers (Switching Character Type)
When a security code input screen such as ID confirmation,
etc. appears, select the
security code entry field
and press j (Char.) to
change the character
type to numbers.
Switching to English Display
You can switch the display from Japanese to English.
From the standby
screen, press k
→ [設定 (Settings)]
[その他の設定
(More settings)]
[言語と入力
(Language & input)]
Number input
Press
j to switch
the character type
[言語 (Language)] [English] → k
* The message "起動中のアプリ、メール送受
信、ダウンロードなどが終了される場合がありま
す 。変 更 し ま す か ？ " (Applications, mail
transmission/reception, and
downloads may be terminated. Change
the language?) appears, confirm the
content and then [はい (Yes)].
Setting Wi-Fi®
You can use a household wireless LAN (Wi-Fi®) environment or a public wireless LAN
environment when outside to connect to the Internet.
* The battery is consumed faster when the wireless LAN (Wi-Fi®) function is ON. You are recommended to
turn wireless LAN (Wi-Fi®) function OFF when not using wireless LAN (Wi-Fi®) function.
From the standby
screen, press k
→ [Settings]
[Frequently used] [Wi-Fi]
[Wi-Fi]
* To turn wireless LAN (Wi-
Fi®) function ON, mark
the checkbox.
Available Wi-Fi® networks are listed.
• Select a Wi-Fi® network to connect → k → Enter a password
as required → o (Connect) to connect the Wi-Fi® network.
• If the Wi-Fi® network you want to connect is not detected,
press u (Menu) → [Add network] and connect to the Wi-Fi®
network manually.
E-mail
To use e-mail (@au.com/@ezweb.ne.jp), subscription to LTE NET is required.
If you did not subscribe when you purchased the product, contact an au shop or Customer
Service Center.
Your e-mail address is determined automatically after initial setting. You can change the e-mail
address later.
■■Initial■Settings
From the standby
screen, press j
Confirm the contents →
[接続する (Connect)]
Confirm the contents →
[閉じる (Close)]
You cannot make initial settings in Wi-Fi® communication only, and an error message is
displayed. You can set Wi-Fi® settings to off in the following operations.
From the standby screen, press k → [Settings] → [Frequently used] → [Wi-Fi] → Unmark
"Wi-Fi".
■■Checking■E-mail■Address
From the standby
screen, press j → u
(Menu) → [E-mail
settings]
[E-mail information] Your E-mail address is
displayed.
* From the standby screen,
you can also check your
E-mail address by pressing
k
→
0
Thank you for buying the "GRATINA" (simply
called the "product" from here on).
This manual describes the settings and precautions
for using the product. For explanations of basic
functions, refer to "Basic Manual" .
Company names and product names referred
to in this manual are registered trademarks or
trademarks of the respective companies. TM or
® may be omitted in this manual.
The illustrations and screenshots in this manual
may look different from the actual product or
screens. Also, please note that the contents of
the screen may be partially omitted.
In this manual, "au Nano IC Card 04 LE" is
abbreviated as "au IC card".
In this manual, "microSD™ memory card (sold
separately)" and "microSDHC™ memory card
(sold separately)" are abbreviated as "microSD
memory card" or "microSD".
April 2019, 1st Edition

■■Changing■E-mail■Address
From the standby
screen, press j → u
(Menu) → [E-mail
settings]
[Other settings] Confirm the contents →
[接続する (Connect)] →
[メールアドレスの変更へ (To
change e-mail address)]
Enter the security code*
→ [送信 (Send)]
Confirm the contents
→ [承諾する (Accept)]
Mark the checkbox for "ご
希望のメールアドレスに変更す
る (Change to your desired
e-mail address)" → Enter
an e-mail address → [送信
(Send)]
[OK] [閉じる (Close)]
* The security code is a 4-digit
number set at subscription.
+Message (SMS)
You can find many joys and conveniences in this messaging application.
+Message can exchange messages, photos, and movies with a phone number. Not only au phone
number destinations, but also available for sending messages to smartphone users.
* To use +Message, subscription to LTE NET is required.
* Data transfers of +Message service incur data communication charges. Subscription to a flat-rate service
is recommended.
* If the other party does not use "+Message", you can only send messages as SMS. Communication charges
are incurred at one time for use in sending SMS.
* You can also use the SMS (C-Mail) service you have used. If you want to use the SMS service you have
used, select "only use SMS".
■■Initial■Settings
From the standby
screen, hold down j
for at least 1 second
k (Next) Confirm the contents of
利用規約 (terms of use),
press o (Accept) →
Follow the on-screen
instructions
+Message setting is
complete
In the above-mentioned
step 3, press u (only
use SMS) → [OK] to use
the SMS (C-Mail) service
you have used.
SMS mode screen
■■How■to■Use■+Message
You can check "Frequently asked questions" and "Use guide" using the browser.
●We recommend you to use other devices such as a PC or tablet when you watch the browser
because this product's screen is small.
From the standby
screen, hold down j
for at least 1 second*
l(MyPage) → [How to
use]
[Frequently asked
questions]/
[Use guide]
* After the step 1, the message list screen may not be displayed depending on the closing operation of
"+Message". When it happens, press , several times and return to the message list screen.
■■Sending■a■Message
From the standby
screen, hold down j
for at least 1 second
o(New Msg) → [New
message]
Select a recipient → k
o (Reply) → Enter text
→ k (Done)
* Press j (File)/l
(Stickers) to send files or
stickers.
o (Send)
■■Checking■a■Received■Message
From the standby
screen, hold down j
for at least 1 second
Select a sender → kDisplaying a received
message
How to Transfer Data
You can import/export data (phone book, photo, movie) from your old au phone to the product.
■■Using■the■microSD■Memory■Card
●Save the data from the old au phone to the microSD memory card beforehand.
① Insert the microSD memory card you used into the product.
② You can transfer data from the data list screen in Data Folder.*
Example: Transferring the phone book in the microSD memory card to the product
From the standby screen, press k → [Data Folder] → [PIM] → select the phone book → k →
o (Set) → select a data to register → k → o (Done) → [Yes] → [OK]
■■Using■"Data■Storage■App"
●To import data using au server, store the data from the old au phone to au server
beforehand. Setting au ID is required for using au server.
●To import data using a microSD memory card, save the data from the old au phone to the
microSD memory card beforehand.
From the standby
screen, press k →
[Security Safety]
[Data Storage App] Select "データ移行 (Data
transfer)" and transfer
data according to the
guidance on the screen
To use "Data Storage App" to back up the phone book to au server automatically, set as
follows.
From the standby screen, press k → [Security Safety] → [Data Storage App] → [データを保
存／戻す (Save/Return data)] → [auサーバーを使う (Use au server)] → [アドレス帳の自動お預かり設
定 (Contacts auto backup setting)]
■■Using■Bluetooth®■Function
You can transfer data using Bluetooth® functions.*
Example: Transferring the phone book to the product
① From the standby screen, press k → [Settings] → [Frequently used] → [Bluetooth] → mark
the checkbox "Bluetooth" → u (Menu) → [Receive Phonebook] → select a Bluetooth® device
→ k → [Yes] → [Connect]
• The product will be paired with a Bluetooth® device and you can receive phone book data.
② After receiving files, press → u (Menu) → [Show received files] → select a phone book → k
→ o (Set) → select the data to register → k → o (Done) → [Yes] → [OK]
●Connections between the product and all other Bluetooth® devices have not been confirmed.
All connections with Bluetooth® devices cannot be guaranteed.
* For details, refer to the "取扱説明書 詳細版 (Full Instruction Manual)" (Japanese).
"取扱説明書 詳細版 (Full Instruction Manual)" (Japanese) is available on the au homepage.
https://www.au.com/support/service/mobile/guide/manual/

Adjusting the Brightness of the Screen
You can adjust the brightness level of the screen.
From the standby
screen, press k →
[Settings]
[Display] [Brightness level]
Select a level → k
Using Battery Care Mode
You can extend the battery life by not charging fully the battery.
●Charging stops at 85% when the battery care mode is turned ON. And the heart mark " " is
attached to the battery icon.
From the standby
screen, press k →
[Settings]
[Eco/Battery] [Battery care mode]
[ON]
Changing Font Size (Character Size)
Set the font size to five levels such as Small/Normal/Large/Huge/Extra large.
From the standby
screen, press k →
[Settings]
[Frequently used] [Font size]
[Font size (General)] Select a font size → k
Changing Volume
Set the volume of ringtones, alarms, music and movies playback, etc.
From the standby
screen, press k →
[Settings]
[Sound/Notification] [Volume]
Set each item