Kyocera DURAXV EXTREME+ User manual

Quick
Reference
Guide

About your phone
NOTE: Devices and software are constantly evolving; the device and screen images and icons you see here are for reference only.
*NOTE: The Camera feature is not available on all models.
Main screen
Center soft
key
Navigation
key
Camera*/
Speaker key
SEND key
Left/Right soft
keys
Voice
commands
key
CLEAR/Back
key
Microphone
Earpiece
END/POWER
key
Keypad

*NOTE: The Camera feature is not available on all models.
Camera*
Speakers Battery cover screw
Flashlight
LED indicator
External speaker
key
PTT key
Headset jack
Call list key
USB/Charger
port
Outer
screen
microSD card
slot (internal)
SIM card
slot
(internal)
SOS key
Volume
keys

Setting up your phone
Your phone already has a SIM card installed.
Step 1. Remove the battery cover.
Using a coin, rotate the battery cover screw on the back
of the phone counter-clockwise several times to loosen
it. (You should hear a click when the screw is loose.)
Insert your fingernail into the slit at the bottom of the
battery cover and lift the battery cover.
Step 2. Insert a microSDTM card (optional).
NOTE: microSD cards are sold separately.
Carefully lift the SIM/microSD guard tab by its edge until it stands
up; then grip and gently pull the tab to flip open the guard.
NOTE: Do not remove the SIM/microSD guard from the phone.
Slide the microSD card into the slot with the gold contacts
facing down. Gently push the card into place and replace
the guard.
Step 3. Insert the battery.
Insert the battery, making sure to align the gold contacts.
Press down gently to secure the battery.
SIM/microSD guard
Slit
Tab

Setting up your phone
Step 4. Replace the battery cover.
Replace the battery cover, making sure all the tabs are
secure and there are no gaps around the cover.
Using a coin, rotate the battery cover screw clockwise
until it is tight.
NOTE: Make sure you press all around the edges of the battery
cover to ensure your phone’s waterproof seal is intact.
Step 5. Charge your phone.
Before turning on your phone, charge it fully.
NOTE: Only use a USB Type-C charger/cable for this phone.
Open the USB/Charger port cover.
Insert the small end of the USB cable into the USB/
Charger port. Insert the larger end into the AC adapter
and plug it into an outlet.
When charging is complete, remove the cable from the
port and securely close the cover.
WARNING: Use only approved chargers and cables with your
phone. Improper handling of the charging port, as well as the use
of an incompatible charger or cable, may cause damage to your
device and void the warranty.
NOTE: Make sure the USB/Charger port cover is securely closed,
when the port is not in use, to keep the port clean and dry.
USB Type-C cable USB Type-C port