Kyocera FS-1010 User manual

FS-1000(+), FS-1010, FS-1050 & FS-1020D
Toner Installation
The TK-17 (TK-18 for the FS-1020D) contains the following items:
•Toner container
•Wiper (lint-free) cloth
•Plastic bag
•Instructions
The initial toner kit supplied with the printer comprises only the toner container
and wiper cloth.
1. Open the printer’s top
cover.
2. Pull lock lever #1 to the
release (UNLOCK)
position, then pull lock
lever #2 to the release
(right) position.
3. Gently remove the old
toner container. Put it in
the supplied plastic bag
and dispose of it.
4. Take the toner container
from the bag. Hold it
with the protective seal
(orange-coloured) facing
up. Shake the toner
container horizontally at
least 5 times. This
ensures that the toner is
evenly distributed inside.

5. Carefully remove the
protective seal (orange-
coloured).
6. Install the new toner
container in the printer.
Push firmly on the top of
the container at the
positions marked PUSH
HERE until you hear it
click in place.
7. While pushing down on
the toner container,
push lock lever #1 to the
lock (LOCK) position.
(Lock lever #2 is
automatically locked.)
If the toner low indication flashes or remains lit after installing the
new toner container, take the toner container out once, shake it
well, then install again.