LA CROSSE CLOCK 404-3051C User manual

20 - Inch Antiqued
Gears Wall Clock
Model: 404-3051C
DC: 092721
This product is warranted to be free from defects in material
and workmanship under normal use and service for a period
of two years from the date of sale to the customer. Warranty
will not apply to defects resulting from abuse, accidents, or
misuse. If a defect that is covered by this warranty arises
during the warranty period, promptly return the clock
(postage prepaid) with proof of purchase showing the date
the clock was purchased to the following address and such
defects will be repaired, or the products will be replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
For Online support visit:
www.lacrossetechnology.com/support
WARRANTY & SUPPORT
Made in China - Printed in China
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to: https://www.p65warnings.ca.gov/

When batteries of dierent brand or type are used together, or new
and old batteries are used together, some batteries may be
over-discharged due to a dierence of voltage or capacity. This
can result in venting, leakage, and rupture and may cause personal
injury.
• Always purchase the correct size and grade of battery
most suitable for the intended use.
• Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of dierent
types.
• Clean the battery contacts and also those of the device
prior to battery installation.
• Ensure the batteries are installed correctly with regard to
polarity (+ and -).
• Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the
environment, please check the internet or your local phone
directory for local recycling centers and/or follow local government
regulations.
CARE & MAINTENANCE
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in
the Battery Compartment (Alkaline recommended)
Battery Life: 12 months
SPECIFICATIONSPOWER UP
Note: The quartz movement will keep the clock
running accurately. If the clock does not operate, or
steadily loses time, replace the battery.
Time Set
Wheel
Battery
Compartment
AA
MOUNTING
Use the Hanger Hole on the back to mount the clock.
1. Insert 1 fresh AA alkaline battery, according to
polarity, into the Battery Compartment.
2. Rotate the Time Set Wheel to set the time.
3. Mount on a wall and enjoy!
Learn more from our video: bit.ly/wallclock_setup