La Crosse Technology W85923v3 Operating and maintenance manual

Projection Alarm Clock
Welcome!
Congratulations on your new Projection Alarm Clock
and welcome to the La Crosse Technology family!
Instructional Manual
Model: W85923v3
DC: 71818
FIND FULL MANUALS, FAQS, AND MORE UNDER THE
SUPPORT TAB HERE: http://bit.ly/W85923v3
Projection Alarm Clock
with Indoor Temperature

Page | 2
Projection Alarm Clock
Table of Contents
Step 1: Power Up
Step 2: Set Time, Date, etc.
Your Clock Features
Projection Rotation | Focus
Set Alarm
Deactivate | Activate Alarm
Snooze
Adjustable Backlight
Reset Button
Help Us, Help You!
Let’s Be Social!
Care and Maintenance
Warranty and Support
Specifications
FCC Statement
Canada Statement
3
3
4
4
5
5
5
6
6
6
6
6
7
7
8
8

Page | 3
Projection Alarm Clock
• 4.5 volt power cord (required) into your clock
*2-AAA batteries for optional backup of your time and date
STEP 1: Power Up
STEP 2: Set Time, Date, etc.
AAA
AAA
4.5 VAC adapter
• Hold then release the SET button to enter time set mode.
• Press and release the + or - buttons to adjust the values. Hold to adjust quickly.
• Press and release the SET button to confirm and move to the next item.
Settings order:
1. 12/24 hour time format
2. Hour
3. Minutes
4. Year
5. Month
6. Date
7. Fahrenheit/Celsius
1. 12/24 hour time 2. Hour
To begin: Hold the SET button 3 seconds to enter the settings:
3. Minutes 4. Year
5. Month 6. Date 7. Fahrenheit | Celsius

Page | 4
Projection Alarm Clock
Your Clock Features
Time
Alarm
Indoor Temperature
Weekday
Month/Date
AM/PM
6
5
4
3
2
1
Buttons
3
2
1
6
5
4
Projection Rotation | Focus
Rotate Projection:
• The projected image can be rotated in 90 degree increments.
• Press and release the PROJECTION button to rotate the image.
Focus Projection:
• Use the Focus Wheel on the back of the projection arm to provide a clear projection image.
Tip: The AC adapter must be plugged in for the projection to work.
Focus Projection
Rotate Projection

Page | 5
Projection Alarm Clock
Set Alarm
• Hold then release the ALARM button to enter time set mode.
• Press and release the + or - buttons to adjust the values. Hold to adjust quickly.
• Press and release the ALARM button to confirm and move to the next item.
To begin: Hold the ALARM button to enter the settings:
1. Alarm Hour 2. Alarm Minutes
The alarm will be active after setting. The alarm icon (clock) will show.
• To deactivate/activate, press and release the ALARM button to view alarm time.
• When alarm time is showing, press and release the ALARM button again to deactivate or activate the time
alarm.
Deactivate | Activate the Alarm
Snooze
When alarm is sounding, press SNOOZE LIGHT button to silence the alarm for 10 minutes.
• The snooze icon Zz will flash.
• Press any button except SNOOZE/LIGHT to silence the alarm for 24 hours.
• This is a crescendo alarm. It will sound for 2 minutes then shut o if no buttons are pressed.
Active Alarm
Active Snooze

Page | 6
Projection Alarm Clock
Follow us on our social media outlets for the latest promotions, product support, and awesome giveaways.
Let’s Be Social!
If you have ideas for features or support solutions you’d like to see us make, please let us know!
We truly want to make owning a La Crosse Technology product not only a practical experience, but also a fun
one. So email us at: [e-mail]
Help Us, Help You!
Reset button
• If the clock display appears distorted or is not responding to buttons, use a pen or paper clip to press and
release the RESET button one time.
• This will reset the clock to default settings.
Adjustable Backlight
• Power Cord: Backlight and projection are on constantly. Press SNOOZE/LIGHT to adjust the backlight:
High-Medium-Low-OFF.
• Batteries only: Press the SNOOZE/LIGHT button for a 10 second backlight and projection.
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment when it is not used for an extended period of time.
• Promptly remove expired batteries.
Care and Maintenance

Page | 7
Projection Alarm Clock
Indoor
Specifications
Temperature Range: 32˚F to 122˚F (0˚C to 50˚C)
Power
Clock:
Optional Battery Backup:
Battery Life:
4.5.0 Volt 500mA power cord included (Required)
AC6 GPU280450150WAOO
2-AAA batteries not included, backup for time and date
over 12 months with reputable batteries.
Dimensions
Clock: 5.9” L x 2.3” W x 4.4” H inch
(14.98 x 5.84 x 11.17cm)
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support with questions or visit our online
help:
Phone: [phone]
Online Product Support and Registration: www.lacrossetechnology.com/support
Warranty and Support

Page | 8
Projection Alarm Clock
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this
equipment. Such changes or modifications could void the user authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints.
The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility
for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
FCC Statement
WARNING: This product can expose you to chemicals including styrene, which is known in the State of California to cause
cancer. For more information go to: www.P65Warnings.ca.gov