La Crosse Technology 513-1417BS User manual

Atomic Digital Clock
with Temperature and Moon Phase
Model: 513-1417BS
D.C. 100220

Setup
Power up. Insert 2-AA batteries into the sensor, then into the
clock. Observe the correct polarity.
Congure basic settings. Hold the SET button for 3 seconds to
enter settings menu. Use the +/- buttons to adjust and SET to
conrm.
AA
AA
Setting order:
1. Language: English | Español
2. Beep ON | OFF
3. Atomic ON | OFF
4. DST ON | OFF (Daylight Saving Time)
5. Time Zone
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit | Celsius
Note: When Español is selected, weekday and sub menu
instructions will be in Spanish. Calendar order: Day, Month, Year.
AA
AA
English | Español Beep ON | OFF
Atomic ON | OFF DST ON | OFF
Time Zone Hour
AST
EST
CST
MST
PST
AKT
HAT
Atlantic
Eastern
Central
Mountain
Pacific
Alaskan
Hawaiian
Time Zone
Minutes Year
Month Date
Fahrenheit | Celsius
Atomic Time
• The station will automatically search for the atomic time signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the SET button to search manually for atomic time
signal.
• Press the SET button to select daylight saving time ON/OFF. If you
do not observe DST, use the +/- button to turn OFF the Daylight
Saving Time Indicator.
• For information about WWVB visit: http://bit.ly/AtomicTime
Place outdoor sensor outside in the shaded location and enjoy
your weather information.
Page | 1 www.lacrossetechnology.com/support 513-1417BS 513-1417BS www.lacrossetechnology.com/support Page | 2
Note: When setting the hour,
AM indicates times before 12:00
(noon) and PM indicates time
after 12:00 (noon).
Note: When the Atomic setting
is set to OFF, the menu will skip
to item 6, your Hour setting

Display icons
AM | PMLow Battery Alarm | Snooze
Atomic Time Fahrenheit | Celsius
Trend Arrow Sensor Signal Strength
Hour Minutes
Time Alarm
Set: Hold the ALARM button for 3 seconds to enter alarm settings.
Use the +/- buttons to adjust and ALARM to conrm.
Deactivate | Activate: The alarm is active when set.
Press and release the ALARM button to deactivate or activate
the alarm. The clock icon will show when alarm is active.
Snooze: Press and release the SNOOZE button to silence the alarm
for 10 minutes. Snooze can be repeated.
Moon Phase
The moon phase is based on the lunar calendar and the Year, Month,
and Date settings set within this clock. Most Internet moon phase
calculations are based on the lunar calendar and can be categorized
into one of the following
New
Moon
Small Waxing
Crescent
Large Waxing
Crescent
First
Quarter
Small Waxing
Gibbous
Large Waxing
Gibbous
Full
Moon
Large Waning
Gibbous
Small Waning
Gibbous
Last
Quarter
Large Waning
Crescent
Small Waning
Crescent
HI | LO Temperature
• Press the PLUS button to view HI Temperature.
• Press again to view LO Temperature.
• Hold the PLUS button for 5 seconds to reset HI and LO
temperature.
Note: All records reset at midnight.
HI Temp LO Temp
Temperature Trend Arrows
The outdoor temperature trend indicators update every 15 minutes and
provide a 1 hour comparison of readings that took place every 15
minutes within that hour. The temperature will have to rise or fall by
2°F (1°C) or more within the hour for the arrows to change.”
Temperature rose Temperature is
unchanged
Temperature fell
Page | 3 www.lacrossetechnology.com/support 513-1417BS 513-1417BS www.lacrossetechnology.com/support Page | 4

Sensor Reception
• Hold the - button 3 seconds to search for the sensor.
• The strength signal icon will ash until the sensor signal is received
or for 3 minutes if no signal available.
• The signal will show solid when connected to the sensor.
Low Battery Icon
Mount Temperature Sensor
• Battery icon by time-Change batteries in the clock.
• Battery icon by outdoor temperature-Change batteries in the sensor.
• Mount the outdoor sensor on a north-facing wall or in any
well-shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the forecast station is
over 330 feet (91 meters) in open air; this does not include barriers
such as walls or oors.
• Be sure the outdoor sensor is mounted vertically.
Position Clock
The clock has a pullout stand to sit on a desk or table, or openings on
the back to mount on a wall.
• For best Atomic time reception orientate the clock with the front or
the back facing Ft. Collins, Colorado.
• Choose a location 6 feet or more from electronics such as cordless
phones, gaming systems, televisions, microwaves, routers etc.
• Place within range of the outdoor sensor (330 feet open air).
Restart
When the outdoor readings show dashes:
• Bring the sensor in the house ve feet from the station.
• Remove batteries from the sensor, and the batteries from the clock.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor, and into the clock.
• Wait 15 minutes to establish a strong connection.
• Place sensor outside in shaded location.
Join the Conversation!
Power Requirements:
513-1417BS - 2 AA batteries (not included)
TX141-Bv3 - 2 AA batteries (not included)
CLOCK 513-1417BS:
Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Battery Life: Over 12 months
Dimensions: 513-1417BS - 11.10” W x 1.14” D x 6.75” H (28.19 W x 2.89 D x 17.15 H cm)
SENSOR TX141v3
Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range: Over 330 ft. (100 meters) RF 433MHz (open air)
Battery Life: TX141-Bv3 - over 12 months
Dimensions: 1.57” L x 0.79” W x 5.12” H (3.98 L x 2.0 W x 13.0 H cm)
Specications
513-1417BS www.lacrossetechnology.com/support Page | 6Page | 5 www.lacrossetechnology.com/support 513-1417BS
Ask questions, watch detailed setup videos, and provide feedback on our
social media outlets!
Care and Maintenance
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an
extended period.
• Promptly remove expired batteries.

Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date
of
purchase) on this product relating to manufacturing defects in materials &
workmanship.
Before returning a product, please contact our friendly customer support or
visit our online help:
Phone: [phone]
Online: www.lacrossetechnology.com/support
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or
processed using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and
corrections are included in subsequent editions. We disclaim any responsibility for any technical error or
printing error, or their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
FCC Statement
Page | 7 www.lacrossetechnology.com/support 513-1417BS