La Crosse Technology T82394 User manual

9 - INCH PLASTIC
INDOOR/OUTDOOR WALL CLOCK
Model: T82394
DC: 091018
Page | 1
This product is warranted to be free from defects in material
and workmanship under normal use and service for a period
of 2 years from the date of sale to the customer. Warranty
will not apply to defects resulting from abuse, accidents, or
misuse. If a defect that is covered by this warranty arises
during the warranty period, promptly return the clock
(postage prepaid) with proof of purchase showing the date
the clock was purchased to the following address and such
defects will be repaired, or the products will be replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
www.lacrossetechnology.com/support
WARRANTY & SUPPORT
Page | 4
Made in China - Printed in China
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to: https://www.p65warnings.ca.gov/

• Always purchase the correct size and grade of battery
most suitable for intended use.
• Clean the battery contacts and also those of your clock
prior to battery installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for
an extended period of time.
• Promptly remove an expired battery.
CARE & MAINTENANCE
• Your thermometer has been pre-calibrated and is not
adjustable.
THERMOMETER
• Battery Requirements: 1 AA (IEC LR6) required in the
movement (Alkaline recommended)
• Battery life: 12 months
• Temperature: -20°F to 120°F Fahrenheit only
SPECIFICATIONS
POWER UP
1. Simply lift o the Battery Cover to remove it.
2. Insert 1 fresh AA battery into your clock according to the
polarity markings.
2. Turn the Time Set Wheel to set your time.
POSITION
Page | 2 Page | 3
Note: The quartz movement will keep the clock running
accurately. If the clock does not operate, or steadily loses
time, replace the battery.
Time Set
Wheel
Battery
Compartment AA
Battery
Cover
Indoor: Mount your clock on a wall using the hanging hole on
the back of your clock.
Outdoor: Choose a shaded location with an overhang to
protect the clock from the sun, standing snow
and rain. Sunlight may cause high temperature
readings.