La Crosse Technology 513-1417H-AL Dimensions

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 1
513-1417H-AL FAQS
The links below will work in most PDF viewers and link to the topic area by clicking
the link. We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
CONTENTS
513-1417H-AL FAQS.......................................................................................................... 1
Batteries ................................................................................................................................ 1
Atomic Clock Factory Restart......................................................................................... 2
Atomic clock ......................................................................................................................... 2
Power Requirements .......................................................................................................... 2
12-Hour time format.......................................................................................................... 2
Fahrenheit/Celsius.............................................................................................................. 2
HI | LO Records................................................................................................................... 2
Dashes, HH.H, LL.L or stuck Indoor Temperature | Humidity.................................... 2
Inaccurate Indoor Temperature Reading........................................................................ 3
Set Time Alarm.................................................................................................................... 3
Activate/Deactivate time alarm........................................................................................ 3
Snooze Alarm ...................................................................................................................... 3
Manually Set Time/Date: Program Menu ...................................................................... 3
Does the clock have a backlight?..................................................................................... 5
Time is off by hours............................................................................................................ 5
Daylight Saving Time......................................................................................................... 5
Atomic clock is dim............................................................................................................. 5
Atomic clock has distorted or frozen display.................................................................. 5
Atomic clock is blank: No letters, numbers or dashed lines ....................................... 6
Atomic clock drains batteries quickly.............................................................................. 6
Atomic clock has missing segments................................................................................ 6
Batteries
Explanation: Many problems are resolved with fresh batteries of the appropriate
voltage. Many items sent in under warranty, work when tested with fresh batteries.
Batteries manufactured this year will have an expiration date 10 years (or more) in
the future. Battery technology has improved and batteries will maintain voltage
longer in storage. However, the environment the batteries reside in for the 10 years
can deplete the power.
A minimum voltage of 1.48V for each battery is necessary for proper
performance.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 2
Use batteries dated at least six years in advance of the current year. Batteries
dated earlier than six years from now may still work, but may be unstable in
performance.
Good name brand batteries make less noise, which reduces the chance of RF
(radio frequency) interference from the battery compartment.
Atomic Clock Factory Restart
Explanation: The factory restart returns the atomic clock and remote sensor to an
“out-of-the-box” default state and often resolves an issue.
Factory Restart:
1. Remove batteries from atomic clock.
2. Press one of the buttons on the atomic clock at least 20 times to clear all
memory.
3. Verify that the atomic clock is blank before proceeding (there may be lines
painted on the screen that will show when there is no power).
4. Leave clock without power for 15 minutes (very important).
5. Install fresh batteries in the atomic clock.
Atomic clock
Power Requirements
2-AA alkaline batteries may be used.
12-Hour time format
Time can display in 12-hour only
Fahrenheit/Celsius
Use the program menu to switch between Fahrenheit and Celsius.
HI | LO Records
Explanation: The atomic clock shows the daily HI | LO temperature and humidity
records each day starting at midnight (12:00 AM). The atomic clock automatically
resets the HI | LO records at midnight (12:00 AM).
•Press and release the PLUS button to view the HI temperature, than Humidity
record.
•Press and release the MINUS button to view the LO temperature, than Humidity
record.
Dashes, HH.H, LL.L or stuck Indoor Temperature | Humidity
Explanation: These symbols are error messages indication the indoor sensor is
outside of its readable range. For indoor readings, this is generally a power related
issue.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 3
Batteries may be overpowered or underpowered. Remove batteries from the
atomic clock.
Press any button 20 times. Leave the atomic clock unpowered for 1-2 hours.
Install fresh Alkaline batteries with correct polarity.
If the indoor temperature is still shows dashes, HH.H or LL.L, the atomic clock
may need replacement.
Inaccurate Indoor Temperature Reading
Explanation: When the indoor temperature is inaccurate, it is often due to the
location of the display or overpowered/under powered batteries. You can test the
accuracy at you home.
Side-by-side test: Bring the remote sensor in the house and place it next to the
atomic clock for 2 hours.
Compare indoor and remote temperature. The temperature should be within 4
degrees to be within tolerance.
Look for heat sources such as sunlight, door or window frames or reflected heat
or cold near the atomic clock.
Set Time Alarm
Hold the ALARM button for 5 seconds to enter the alarm setting mode.
1. The alarm hour digit will flash in the time display.
2. Press and release the + or - buttons to select the hour.
3. Press and release the ALARM button to set the minutes.
4. The minute digits will flash.
5. Press and release the + or - buttons to adjust the minutes.
6. Confirm with the ALARM button and exit.
Activate/Deactivate time alarm
Press and release the ALARM button once to show alarm time.
Press and release the ALARM button to activate/deactivate the Alarm.
The bell icon will disappear when the alarm is no longer active.
Snooze Alarm
When the alarm sounds, press the LIGHT button to trigger snooze alarm for 10
minutes. The snooze icon will flash when the snooze feature is active.
To stop alarm for one day, press ALARM button, while in snooze mode. The bell
icon will remain solid.
Note: When the alarm sounds, it continues for 2 minutes and then shuts off
completely.
Manually Set Time/Date: Program Menu
1. Hold the SETTINGS button to enter settings mode.
2. Press the +or -buttons to adjust the values.
3. Press the SETTINGS button to confirm adjustments and move to the next item.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 4
Setting order:
1. Language: English | Español
2. Beep ON | OFF
3. Atomic ON | OFF
4. Time Zone
5. DST ON | OFF (Daylight Saving Time)
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit | Celsius
1. Hold the SETTINGS button for 5 seconds.
2. ENGLISH will flash.
3. Press and release the + or - buttons to select Español.
4. Confirm with the SETTINGS button and select beep ON | OFF
5. BEEP and ON will flash.
6. Press and release the + or - buttons to turn this feature OFF.
7. Confirm with the SETTINGS button and select atomic time ON | OFF.
8. ATOMIC and ON will flash.
9. Press and release the + or - buttons to turn this feature OFF.
10.Confirm with the SETTINGS button and select Time Zone.
11.ZONE-EST will flash.
12.Press and release the + or - buttons to change time zones.
13.Confirm with the SETTINGS button and select DST (Daylight Saving Time) ON |
OFF.
14.DST and ON will flash.
15.Press and release the + or - buttons to turn this feature OFF.
16.Confirm with the SETTINGS button and move to the hour.
17.The hour digit will flash.
18.Press and release the + or - buttons to select the hour.
19.Press and release the SETTINGS button to set the minutes.
20.The minute digits will flash.
21.Press and release the + or - buttons to adjust minutes.
22.Confirm with the SETTINGS button and select the year.
23.The year will flash.
24.Press and release the + or - buttons to set the year.
25.Press the SETTINGS button again to confirm and to enter the month setting.
26.The month will flash.
27.Press and release the + or - buttons to set the month.
28.Press the SETTINGS button again to confirm and enter the date setting.
29.The date will flash. (Day of the week will set automatically)
30.Press and release the + or - buttons to set the date.
31.Confirm all calendar settings with the SETTINGS button and select
Fahrenheit/Celsius.
32.°F will flash.
33.Press and release the + or - buttons to select Celsius.
34.Confirm with the SETTINGS button and exit.

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 5
Does the clock have a backlight?
No, as this clock is battery operated there is no backlight.
Time is off by hours
Check to see if the WWVB Tower icon appears on the atomic digital clock. If not,
the digital clock has not received a WWVB time signal in the past 24 hours.
Reposition the digital clock with the front or back facing Colorado.
Check that the Time Zone selected correctly reflects your location. Adjust the
time zone in the Program Menu.
Check that the DST indicator is correct for your location (On this clock, please
change the DST setting to OFF unless you live in Arizona). Adjust the DST
indicator in the Program Menu.
Large buildings, metal roofed buildings and buildings or rooms full of electrical
and/or radio equipment make it difficult to receive the WWVB time signal.
Daylight Saving Time
Dependent on your location, position of the clock in your home, and atmospheric
interference, it may take up to 5 nights for the change from Daylight Savings
Time to Standard Time and vice-versa to occur.
Check for a WWVB Tower Icon showing on the atomic digital clock. The tower
icon indicates you have received the WWVB signal from Ft Collins CO in the past
24 hours.
Check that the clock is in the correct Time Zone.
Check whether the DST indicator is ON or OFF. On this clock, please change the
DST setting to OFF unless you live in Arizona.
Check for fresh batteries. Without proper batteries, the antenna will have a
harder time picking up the signal.
Position the digital clock in a window (with the front or back) facing Ft. Collins,
Colorado and leave for up to five nights. If you do not have a window facing this
direction, position the clock near an outside wall and point the unit in this
general direction.
Atomic clock is dim
Explanation: Most atomic clocks have a dark background. Place the atomic clock
at eye level, to determine if it is dim. Atomic clocks that sit in the sunlight can
develop a cloudy film over time.
This is generally a power related issue.
Batteries may be overpowered or underpowered. Remove batteries from atomic
clock.
Press any button 20 times. Leave the atomic clock unpowered for 1-2 hours.
Install fresh alkaline batteries with correct polarity.
Atomic clock has distorted or frozen display
Explanation: On a brand new atomic clock, check for thin plastic film of printed
scratch guard that may be on the screen of the atomic clock. This thin piece of
plastic has printed numbers for store displays. When the batteries are installed, the
“real” numbers show behind the printed scratch guard and create distortion.
With all power removed, the atomic clock should be blank.