La Crosse Technology 513-1419BLV3 User manual

Atomic Digital Ofce Clock
Model: 513-1419BLv3
D.C. 010317
For online video support:
http://bit.ly/LaxTechTalk
MONTH
DATE

Setup
Power up. 1. Insert the 5.0 volt power cord into the outlet then
into the clock.
2. (Optional) Insert 2 “AA” batteries (not included)into the clock
Congure basic settings. Hold the MODE button for 3 seconds
to enter settings menu. Use the + or- button to adjust and SET to
conrm.
Setting order:
Time set order:
1. Language (English or Spanish)
2. Beep ON/OFF
3. Atomic ON/OFF
4. Time Zone
5. DST ON/OFF
6. 12/24 Hour
7. Hour
8. Minutes
9. Year
10.Month
11.Date
12.Fahrenheit/Celsius
English | Español Beep ON | OFF
Atomic ON | OFF Time Zone
AST
EST
CST
MST
PST
AKT
HAT
Atlantic
Eastern
Central
Mountain
Pacific
Alaskan
Hawaiian
Time Zone
Page | 1 www.lacrossetechnology.com/support 513-1419BLv3
Note: When the Atomic setting is
set to OFF, the menu will skip to
item #6, your 12/24 hour setting
AA
AA
Note: The clock will search for
atomic time 2 hours after
batteries are installed.
Note: When Español is selected, the
sub menu instructions
will be in Spanish.

DST ON | OFF Hour
Minutes Year
Month Date
Fahrenheit | Celsius
Atomic Time
• The clock will automatically search at UTC 7:00, 8:00, 9:00, 10:00,
and 11:00.
• If there is no WWVB reception, the clock will search for the atomic
time signal every 2 hours until the WWVB time is received.
• After reception, this clock will only search for the atomic signal
after midnight.
• From normal time display hold the MINUS button for 3 seconds, to
search for the WWVB time signal.
• For information about WWVB visit: http://bit.ly/AtomicTime
513-1419BLv3 www.lacrossetechnology.com/support Page | 2

Display icons
AM | PM
Low Battery
Alarm
Atomic Time
Fahrenheit | Celsius
Page | 3 www.lacrossetechnology.com/support 513-1419BLv3
MONTH
DATE
DAY MONTH DATE
Snooze
Display: Date | Indoor Temp | Seconds
• Press and release the MODE button to customize how the top and
right sections of the clock are displayed.
• The clock will stay in the mode selected.
MODE 1:
Weekday &
Month/Date
MODE 2:
Day/Month/Date
& Temperature
MODE 3:
Day/Month/Date
& Seconds
MONTH
DATE
DAY MONTH DATE MONTHDAY DATE

513-1419BLv3 www.lacrossetechnology.com/support Page | 4
Set Time Alarm
Activate/Deactivate Alarm
1. Hold the ALARM button to enter alarm settings. “AL” will show.
2. Press and release ALARM to activate/deactivate the alarm.
3. The bell icon will show when active.
Snooze
1. When alarm sounds press the SNOOZE button to silence the alarm
for 10 minutes.
2. The alarm bell icon will show and Zz will ash.
3. Press any button except SNOOZE to stop the alarm for 1 day.
Note: Alarm is crescendo sound. When the alarm sounds, it
continues for 2 minutes and then shuts off completely.
Alarm ON Alarm OFF
• Hold the ALARM button for 3 seconds to enter alarm settings menu.
• Use the + or- button to adjust and ALARM to conrm.
Backlight: HI-LOW-OFF
• When operating with the AC adapter, the backlight is adjustable:
(HI-LOW-OFF).
• Press and release the SNOOZE/LIGHT HI-LOW-OFF button to
adjust backlight.
• When operating on batteries only, the backlight will come on
briey when the SNOOZE button is pressed.

Position Clock
The clock has a pullout stand to sit on a desk or table, or openings on
the back to mount on a wall.
• For best Atomic time reception orientate the clock with the front or
the back facing Ft. Collins, Colorado.
• Choose a location 6 feet or more from electronics such as cordless
phones, gaming systems, televisions, microwaves, routers etc.
Follow Us on Social Media
For personalized interaction
http://bit.ly/LaxTech_Facebook
Join the conversation
http://bit.ly/LaxTech__Twitter
Latest video content
http://bit.ly/LaxTech_YouTube
Pin and share
http://bit.ly/LaxTech_Pinterest
Page | 5 www.lacrossetechnology.com/support 513-1419BLv3
Low Battery Icon
• The low battery icon will appear between the hour and minutes.
• This icon indicates it is time to replace the batteries.

Indoor
Power
Battery Life
Dimensions
32˚F to 99˚F | 0˚C to 37˚C
Clock: 5.0VAC # GPU280500150WA00
Optional: 2 AA (LR6, IEC) batteries not included
24 months with reputable batteries
Clock: 9.84” W x 1.14” D x 7.48” H
(25cm W x 29cm D x 190cm H)
Specications
513-1419BLv3 www.lacrossetechnology.com/support Page | 6
Care and Maintenance
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an
extended period of time.
• Promptly remove expired batteries.
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship.
Before returning a product, please contact our friendly customer sup-
port or visit our online help:
Phone: [phone]
Online: www.lacrossetechnology.com/support
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized changes or modications to this equipment. Such changes or
modications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in
part, or duplicated or processed using electronic, mechanical or chemical
process without the written permission of the publisher. This booklet may
contain errors or misprints. The information it contains is regularly checked
and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Canada Statement
This device complies with CNR Industry Canada license -exempt devices.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
FCC Statement
Page | 7 www.lacrossetechnology.com/support 513-1419BLv3