La Crosse Technology 616-1410 User manual

SET UP GUIDE
MODEL: 616-1410 / 616-12667
616-1410v2 / 616-12667v2
Atomic Projection Clock
with Indoor/Outdoor Temperature

AA
AA
AAA
AAA
AAA
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into an outlet, then into your Projection
Clock. Optional: Insert 3-AAA batteries for backup.
3. Set time, date, etc.
4. Once the sensor is reading to your clock, place the senor outside in a
shaded location. View our sensor mounting video here:
bit.ly/th_sensor_mounting
• The clock will search for the Atomic Time Signal at power up and at UTC
7:00, 8:00, 9:00, 10:00, and 11:00.
• The Atomic Time Signal Icon will flash while searching and be solid
when it has connected.
• From the normal time display, press the SET button to manually start or
stop a search for the WWVB time signal. For information about WWVB
visit: bit.ly/AtomicTime
Note: The Backlight will be o temporarily while searching for the WWVB time signal.
Power Up
Atomic Time
2
TX141-Bv3
or TX141-Bv4
Outdoor Sensor
616-1410 / 616-12667
or
616-1410v2 / 616-12667v2
Projection Clock

Settings Menu
TIME ZONE
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
3
IMPORTANT: Only press or hold one button at a time.
1. Hold the SET button until the display changes to enter the Settings
Menu.
2. Press and release the +/- buttons to adjust values.
3. Press and release SET to confirm values.
4. Press and release the SNOOZE/LIGHT button at any time to save and
exit.
Settings Menu Order:
• Language (English, Spanish, French, German)
• Beep ON/OFF
• Atomic ON/OFF
• DST Settings:
DST AUTO ON (Changes Spring and Fall)
DST ALWAYS OFF (No change in Spring)
DST ALWAYS ON (No change in Fall)
• Time Zone
• 12/24 Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date or Date/Month
• Fahrenheit/Celsius

Backlight
• Press the SNOOZE/LIGHT button to adjust the backlight to adjust the
backlight intensity. There are 4 levels, plus an o option.
Auto Dim
Program your display to automatically dim during preselected times.
1. Hold the SNOOZE/LIGHT button to enter the Auto-Dim Settings Menu.
2. Press the +/- buttons to turn the Auto-Dim feature on or o. Press
SNOOZE/LIGHT to confirm.
3. Press the +/- buttons to adjust the starting hour. Press SNOOZE/LIGHT to
confirm.
4. Press the +/- buttons to adjust the stopping hour. Press SNOOZE/LIGHT
to confirm and exit.
The icon will appear on the LCD when the Auto-Dim feature activated.
4

Custom Display
Press the CALENDAR button to change the middle section of your display.
Choose between full weekday, abbreviated weekday with date, or alarm
time.
Projection Image
1. Hold the button to enter the Projection Settings
2. Use the +/- buttons to change projection selection.
3. Projection image will stay on last option selected.
Projection Options:
• Time only
• Indoor Temp only
• Outdoor Temp only
• Alternate Time + Indoor Temp + Outdoor Temp

Projection Brightness & Rotation
Brightness:
Press the button to change the Projection Brightness (High, Low, or O).
Rotation:
Use the Rotation Wheel on the back of the projection arm
to change the projection orientation 270 degrees.
Tilt The Projection Arm:
The Projection Arm can tilt forward and backward to adjust the
location of the projection image on a wall or ceiling.
Time Alarm
Set Alarm:
1. Hold the ALARM button to enter the Alarm Settings Menu.
2. Use the +/- buttons to adjust the flashing values.
3. Press the ALARM button to confirm and move forward.
Note: The alarm will activate after being set, indicated by the Alarm Icon .
The Alarm Time will also remain on screen until the CALENDAR button is
used to switch back to a calendar display.
Activate/Deactivate Alarm:
Press the ALARM button to activate or deactivate the alarm and view your
alarm time. The Alarm Icon will show only when alarm is active. 6

Snooze:
• When alarm sounds, press the SNOOZE button to silence alarm for 10
minutes. The Snooze Icon Zz will flash.
• Press any button except SNOOZE to silence the alarm for 24 hours.
• When alarm ends by button press or time out after 2 minutes, GOOD DAY
will show briefly then return to normal time display.
Temperature Trend Arrows
Both the Indoor and Outdoor temperature have Trend Arrows to indicate
temperature changes (2°F / 1°C) over the past one hour period.
Temperature has risen over the past one hour.
Temperature has been steady over the past one hour.
Temperature has fallen over the past one hour.
7

Outdoor Temperature
If you are seeing NO or dashes for your outdoor readings, please try the following
steps:
1. Hold the +button to search for your outdoor sensor. The Reception Indicator
will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to
the display and remove power from both the sensor and clock.
3. Press any button on the clock 20 times and leave the parts sit for a few moments
with the power o.
4. Install a new set of alkaline batteries into the sensor, then into your clock.
For additional help visit: bit.ly/basic_restart
5. If your outdoor data is still not appearing after these steps, please contact our
support sta via the links below
Low Battery
8
By the Indoor Temp, replace clock batteries.
By the Outdoor Temperature, replace sensor batteries.

Specifications
Projection Clock (616-1410/616-12667) or
(616-1410v2/61612667v2)
Temperature Range: 32°F to 99°F
(0°C to 37°C)
Power Requirements: 5 volt Power cord
AC6: GPU280500150WAOO
Optional: 3-AAA LR3, IEC, batteries for
backup (not included)
The plug on the power adapter is intended to serve as the
disconnect device, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
Dimensions: 5.83” L x 1.61” L x 4.06” H
(14.8cm L x 4.1cm W x 10.3cm H)
Outdoor Sensor (TX141-Bv3 or TX141-Bv4)
Temperature Range: -40°F to 140°F
(-40°C to 60°C)
Transmission Range: Over 330 ft. open air
(100 meters) RF 433MHz
Update Interval: About every 51 seconds
Power: 2-AA, IEC, LR6 batteries
(not included)
Battery Life: Over 12 months
Dimensions: 1.57” L x 0.79” W x 5.12” H
(4.0cm L x 2.0cm W x 13.0 H cm)
9
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 091021
Stay in Touch
Follow La Crosse Technology on YouTube,
Twitter, Facebook and Instgram.
Ask questions, watch setup videos, and
provide feedback on our social media outlets.
If you require additional support, get in touch
with our friendly customer support team
based in La Crosse, WI.
Phone: [phone]
Online: bit.ly/contact_techsupport
Our knowledgable customer support team is
available: Mon-Fri 8am-6pm CST
We’re Here to Help
This product can expose you to chemicals includ-
ing styrene, which is known in the State of Califor-
nia to cause cancer.
For more information, go to:
www.P65Warnings.ca.gov
WARNING:

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
All rights reserved. This manual may not be reproduced
in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the
written permission of the publisher.
This booklet may contain errors or misprints. The information
it contains is regularly checked and corrections are included
in subsequent editions. We disclaim any responsibility for
any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
FCC Statment
10
Warranty Info
La Crosse Technology, Ltd. provides a 1-year
limited time warranty (from date of purchase) on
this product relating to manufacturing defects in
materials & workmanship.
La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
Battery Replacement Instructions
When batteries of dierent brand or type are used together,
or new and old batteries are used together, some batteries
may be over-discharged due to a dierence of voltage or
capacity. This can result in venting, leakage, and rupture and
may cause personal injury.
•Always purchase the correct size and grade of battery
most suitable for the intended use.
•Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of
dierent types.
•Clean the battery contacts and also those of the device
prior to battery installation.
•Ensure the batteries are installed correctly with regard to
polarity (+ and -).
•Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this
product.
•Remove used batteries promptly.
•For recycling and disposal of batteries, and to protect the
environment, please check the internet or your local phone
directory for local recycling centers and/or follow local
government regulations.
Care & Maintenance