La Crosse Technology BBB84022 User manual

Model: BBB84022
Instruction Manual
DC: 121217
PM
ATOMIC DIGITAL WALL CLOCK
WITH INDOOR TEMPERATURE & HUMIDITY

Table of Contents
Selectable Date Display
• Press and release the SET button to toggle between
a full weekday or a 3 letter weekday, month, and date.
• Your clock will stay on the selected display option.
Page | 1 www.lacrossetechnology.com/support BBB84022
Selectable Date Display
Let’s Get Started
Basic Settings
Atomic Time Signal - WWVB
Time Alarm
Activate | Deactivate Alarm
Snooze
Low Battery
Let’s Get Social
Care and Maintenance
Specifications
Warranty and Support
FCC Statement
1
2
2
4
4
5
5
5
5
6
6
6
7
PM
PM

Lets Get Started
1. Insert 3 AAA batteries into your clock
2. Configure basic settings and enjoy!
Basic Settings
1. Hold the SET button 3 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values, hold to
adjust quickly.
3. Press the SET button to confirm adjustments and move to
the next item.
4. Press the SNOOZE button at any time to exit.
Settings menu order:
• Language (English, Español, Francais)
• Beep ON/OFF
• Atomic ON/OFF
• DST ON/OFF
Note: When Español or Francais are
selected, the settings menu will
continue in the language selected.
BBB84022 www.lacrossetechnology.com/support Page | 2

DST ON | OFF Time Zone Set Hour
AM
Set Minutes Set Year Set Month
Set Date Fahrenheit | Celsius
Time Zones
Zone AST - Atlantic
Zone EST - Eastern
Zone CST - Central
Zone MST - Mountain
Zone PST - Pacific
Zone AKT - Alaska
Zone HAT - Hawaii
Language Beep ON | OFF Atomic ON | OFF
• Time Zone
• Hour
• Minutes
• Year
• Month
• Date
• Temperature Fahrenheit/Celsius
Page | 3 www.lacrossetechnology.com/support BBB84022
AM

Atomic Time -WWVB Signal
• Your clock will search for the atomic signal at UTC 7:00, 8:00,
9:00, 10:00, and 11:00.
• If there is no WWVB signal reception, your clock will search
for the time signal every 2 hours until the WWVB time has
been received.
• The atomic time signal icon (tower) will flash while
searching, and be solid when connected.
• Press and release the PLUS button to manually search for the
WWVB time signal.
• For information about WWVB visit: http://bit.ly/AtomicTime
Time Alarm
1. Hold the ALARM button 3 seconds to enter alarm
setting mode.
2. Press the + or - button to adjust the flashing values. Hold the
+ or - buttons to adjust quickly.
3. Press the ALARM button to confirm adjustments.
4. Press the SNOOZE button at any time to exit.
BBB84022 www.lacrossetechnology.com/support Page | 4
AM

• The alarm is active when set. From normal time display, press
and release the ALARM button to deactivate or activate the
alarm. The alarm time will show for 2 seconds.
• Alarm icon (bell) will show then active.
Activate | Deactivate Alarm
• When alarm sounds, press the SNOOZE button to silence
alarm for 10 minutes. The alarm bell will flash.
• Press any button except SNOOZE to silence the alarm for the
next 24 hours.
Snooze
Low Battery
• When the low battery icon appears, replace the batteries in
your clock.
Page | 5 www.lacrossetechnology.com/support BBB84022
Let’s Get Social
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide
feedback on our social media channels!

• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Ensure the batteries are installed with correct polarity ( + and - ).
• Remove batteries from equipment when it is not to be used for an
extended period of time.
• Promptly remove expired batteries.
Care and Maintenance
Specifications
Indoor Temp: 32°F to 122°F (0°C to 50°C)
Indoor Humidity: 10% to 99% RH
Batteries: 3-AAA LR3, IEC (not Included)
Battery Life: Over 2 years
Dimensions: 8.97’ L x 0.85’ W x 7.12 H
(22.80 L x 2.18 W x 18.10 H cm)
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship.
Before returning a product, please contact our friendly customer
support or visit our online help:
Phone: [phone]
Online: www.lacrossetechnology.com/support
Warranty and Support
BBB84022 www.lacrossetechnology.com/support Page | 6

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a r
esidential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized changes or modifications to this equipment. Such changes or
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or
duplicated or processed using electronic, mechanical or chemical process without
the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is
regularly checked and corrections are included in subsequent editions. We
disclaim any responsibility for any technical error or printing error, or their
consequences.
All trademarks and patents are recognized.
FCC Statement
Page | 7 www.lacrossetechnology.com/support BBB84022

Modèle: BBB84022
Manuel d’instructions
DC: 121217
HORLOGE MURALE NUMÉRIQUE ATOMIQUE
AVEC TEMPÉRATURE ET HUMIDITÉ INTÉRIEURES
PM

Table of Contents
Achage de la date sélectionnable
• Appuyer et relâcher la touche SET pour basculer entre un
jour de semaine complet ou un jour de semaine, un mois et
une date de 3 lettres.
• Votre horloge restera à l’option d’achage sélectionnée.
Page | 1 www.lacrossetechnology.com/support BBB84022
Achage de la date sélectionnable
Commençons
Paramètres de base
Signal de temps atomique - WWVB
Alarme temporelle
Activer | Désactiver l’alarme
Roupillon
Pile faible
Soyons socials
Entretien et maintenance
Spécifications
Garantie et support
Déclaration de la FCC
1
2
2
4
4
5
5
5
5
6
6
6
7
PM
PM