La Crosse Technology W88631 User manual

Atomic Digital Wall Clock
Model: W88631
DC: 012318
POWER UP
• Install 2-AAA batteries into your clock.
• For detailed instructions on how to power up your clock, please
review the full manual at: http://bit.ly/W88631
• The clock will search for WWVB Atomic time signal for
8 minutes after batteries are installed. Tower flashes.
• If can receive the signal within these 8 minutes, it will
only search after midnight every day.
(UTC 7:00, 8:00, 9:00, 10:00, 11:00)
• If it can not receive the signal within these 8 minutes, it
will search every 2 hours (8 minutes per time) until it
receives, then start to search after midnight every day.
• Hold the DOWN for 3 seconds to start or stop a search for
the WWVB Atomic Time signal.
• For information about WWVB Atomic Time visit:
http://bit.ly/AtomicTime
AAA
AAA
WWVB ATOMIC TIME
SETTINGS
1. Hold the SET °F/°C button to enter the settings menu.
2. Press the UP or DOWN buttons to adjust the values.
3. Press the SET °F/°C button to confirm adjustments and move
to the next item.
Settings Menu Order:
1. WWVB time signal (On/Off)
2. Time Zone - 7 time zones
3. DST (Daylight Saving Time On/Off)
4. Hour
5. Minutes
6. Year
7. Month
8. Date
Time Zones
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
ALARM: Hold to enter alarm settings. “AL” will show. Use UP
and DOWN buttons to adjust. Press ALARM to confirm.
ALARM: Press to view alarm time. Press again to
activate or deactivate time alarm.
SNZ: When alarm sounds press SNZ to silence alarm for 10
minutes. Zz will flash.
SET °F/°C: Press to select Fahrenheit or Celsius
temperature display.
OTHER BUTTON FUNCTIONS
Page | 2 Page | 3

FIND FULL MANUALS & FAQS UNDER THE SUPPORT TAB AT:
http://bit.ly/W88631
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social
media outlets!
NEED MORE HELP?
If you require additional support, call our friendly customer support representatives
based out of our oce in La Crosse, Wisconsin.
Phone: [phone]
Our knowledgeable customer support team is available Monday-Friday,
8am-6pm CST.
WE’RE HERE TO HELP!
SPECIFICATIONS
Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Power Requirements: 2-AAA, IEC, LR3 batteries (not included)
Dimensions: 7.80” L x 1.10” W x 5.47 “ H (198.12 x 27.94 x 138.93 mm)
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship.
For Full Warranty Details, Visit:
www.lacrossetechnology.com/support
CARE + MAINTENANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable
for intended use;
• Clean the battery contacts and also those of the device prior to
battery installation;
• Ensure the batteries have with correct polarity (+ / -)
• Remove batteries from equipment that will not to be used for an
extended period.
• Promptly remove expired batteries.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Increase separation between equipment & receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized changes or modifications to this equipment. Such changes or
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or
duplicated or processed using electronic, mechanical or chemical process without
the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly
checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences. All
trademarks and patents are recognized.
FCC STATEMENT
CANADA STATEMENT
This device complies with CNR Industry Canada license -exempt devices.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
Page | 5 Page | 6Page | 4
LOW BATTERY INDICATOR
• When the low battery indicator appears above the
seconds, replace batteries in your clock.