La Crosse Technology WT-3161WH User manual

16” Atomic Wall Clock
Power up
Select Time Zone and DST ON or OFF.
Insert 1 AA battery into the movement.
For best reception, place clock on a wall that
faces Ft. Collins, Colorado.
During the night, your clock will set itself.
Model: WT-3161WH
DC: 062617
IMPORTANT:
• Hands will move to 12:00 and search for the
atomic time signal.
• If no signal, after 8-10 minutes, clock will run
from 12:00 am.
• Clock will continue to search for the WWVB
atomic time signal.
• Allow up to 5 nights for the clock to receive
the atomic time signal.
1.
2.
3.
4.

6
5
SET
RESET
WAVE (Atomic search)
Battery
Time Zone Selector
DST Selector
Set the clock manually:
1. Hold SET for 3 seconds
2. Press and Hold SET to move hands quickly.
3. Press and release SET to move hands forward step by
step.
4. The atomic time signal will override manual settings.
Reset:
If the clock does not respond to function modes, press the
RESET button on the movement case.
• Always purchase the correct size and grade of battery most suitable for use.
• Clean the battery contacts and also those of the device prior to battery
installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment which is not to be used for an extended
period of time.
• Promptly remove an expired battery.
Care and Maintenance
4
3
2
1
6
5
4
3
2
1
Specications
Batteries: 1 AA (IEC LR6) required in movement
(Alkaline recommended)
Battery Life: over 12 months with reputable battery brand
Learn more about RV interior decor we have.