La Crosse Technology WS-9133U-IT User manual

WS-9133U-IT www.lacrossetechnology.com/support Page | 1
Model: WS-9133U-IT
Quick Setup Guide
DC: 082015
WIRELESS FORECAST STATION
Time
12/24hr
+ Alarm
Indoor
Temp.
ºF/ºC
TX37U-IT
Temperature
Sensor
Forecast Icon
+ Tendency
Arrow
Wall
Hanging
Hole
Battery
Compartment
3AA batteries
Pullout
Stand
BUTTONS
2 “AA”
batteries
RESET
Outdoor
Temp.
ºF/ºC
SET + ALARM MIN/MAX

WS-9133U-IT www.lacrossetechnology.com/support Page | 2
Alarm
Icon
Get Started
Step 1: Insert 2 fresh AA, LR6 1.5 volt batteries into the TX37U-IT
sensor according to the polarity marked in the battery
compartment.
Step 2: Insert 3 fresh AA, LR6 1.5 volt Alkaline batteries into the
forecast station according to the polarity markings.
Step 3: After 5 minutes place sensor outside in a shaded location.
Restart: If the outdoor temperature shows dashes, remove
batteries from the station & outdoor sensor. Press any button on
the station 20 times. After 15 minutes, return to Step 1.
Set 12/24 Hour, Temperature Units, Time
1. Hold the SET button to enter time set mode.
2. Press the + button to adjust values.
3. Press the SET button to confirm adjustments and move to next
item.
Settings order:
1. Hour
2. Minutes
3. 12/24 Hour Format
4. °F/°C
Press SET to exit, or wait 30 seconds without pressing buttons to
return to the normal time display.
Set Alarm Time
1. Hold the ALARM button to enter time set mode.
2. Press the + button to adjust values.
3. Press the ALARM button to confirm adjustments and move to
next item.
Settings order:
1. Hour
2. Minutes
Activate/Deactivate Alarm
Press the ALARM button. The alarm icon will show.
Press the ALARM button again.
When the alarm icon is gone, the alarm is inactive.

WS-9133U-IT www.lacrossetechnology.com/support Page | 3
Low
Battery
Icon
Snooze
Press the MIN/MAX button to activate the snooze function for
10 minutes.
To stop the alarm completely, press any button other than the
MIN/MAX button.
Forecast Icons
The forecast station uses changing atmospheric pressure to
predict weather conditions for the next 12-hours with 70-75%
accuracy.
Forecast Trend Arrows
The up or down arrow indicate current trends in air pressure.
Up Arrow: Air pressure is increasing; weather will improve.
Down Arrow: Air pressure is decreasing; weather will degrade.
No Arrow: Air pressure is stable
Low Battery Icon
When the low battery icon appears in the indoor reading
section, replace the batteries in the forecast station.
When the low battery icon appears in the outdoor
readings section, replace the batteries in the outdoor
transmitter.
View/Reset MIN/MAX Readings
The MIN/MAX values are constantly displayed below the
temperatures.
To reset, hold the MIN/MAX button for 5 seconds.
Note: The min/max values only recognize whole numbers.
Therefore when reset, the min and max values may be 1-2
degrees different from current temperature.
Sunny Partly Sunny Rainy

WS-9133U-IT www.lacrossetechnology.com/support Page | 4
Position Outdoor Sensor
Mount the outdoor sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
The maximum transmitting range to the wireless forecast
station is over 330 feet (100 meters) in open air, not including
walls, tree, windows etc.
Specifications
Indoor:
Temperature Range:
14.2°F to 99.9°F
(-9.9°C to 37.8°C)
Outdoor:
Temperature Range:
-39.8°F to +139.8°F
(-39.9°C to 59.9°C)
Distance:
Over 330 ft. (100 meters)
RF 915MHz (open air)
Interval:
About every 4 seconds
Power:
Wireless Forecast Station:
3-AA, IEC, LR6 batteries
(not included)
TX37U-IT Sensor:
2-AA, IEC, LR6 batteries
(not included)
Battery Life:
Wireless Forecast Station:
Over 12 months
TX37U-IT Sensor:
Over 12 months
Dimensions:
Wireless Forecast Station:
5.33” x 1.10” x 5.56”
(135.4 x 28 x 141.4mm)
TX37U-IT Sensor:
1.5” x 0.83” x 5.05”
(38.2 x 21.2 x 128.3mm)
Care and Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable
for the intended use.
Replace all batteries of a set at the same time.

WS-9133U-IT www.lacrossetechnology.com/support Page | 5
Clean the battery contacts and also those of the device prior to
battery installation.
Ensure the batteries are installed correctly with regard to polarity
(+and -).
Remove batteries from equipment with is not to be used for an
extended period of time.
Remove used batteries promptly.
Warranty and Support Information
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from
date of purchase) on this product relating to manufacturing defects in
materials & workmanship.
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
For warranty work, technical support or other information contact:
La Crosse Technology, Ltd
2830 26th Street S.
La Crosse, WI 54601
Contact Support:
1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
Online Product Support:
www.lacrossetechnology.com/support
Protected under U.S. Patents:
5,978,738 | 6,076,044 | RE43903

WS-9133U-IT www.lacrossetechnology.com/support Page | 6
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form,
even in part, or duplicated or processed using electronic, mechanical or
chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains
is regularly checked and corrections are included in subsequent editions.
We disclaim any responsibility for any technical error or printing error, or
their consequences.
All trademarks and patents are recognized.