La Hacienda Malmo Contemporary Tall Steel Chimenea... User manual

UserInstructions-Pleasekeepforfuturereference
MalmoContemporary
TallSteelChimenea 56017US
V1.0
ProducedinChinaforLaHaciendaUKLtd
Hangar27,SiteC,AstonDownAirfield,NrStroud,Glos,GL68HR,UK
www.lahacienda.co.uk
Toolslist
Toolsrequired(notincluded)
IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions.
These instructions form part of the product.
Please take note of all of the safety warnings listed in these instructions.
Please read these instructions in their entirety and retain them for future reference.
These instructions should be stored with the product.
This product is for domestic use ONLY and should not be used commercially or for contract purposes.
La Hacienda
®

2
Careandsafeuseguidelines
NEVER touch the ground/surface or leave fuel
or other objects directly under this product, as
the ground/surface will be very hot and may
remain so for some time even after the product
has been extinguished
Ensure that the chimenea is positioned on
a permanent flat, stable, heat resistant
non-flammable surface away from flammable
items.
The unit may be left outside all year if a
chimenea cover is used to help protect it
from bad weather.
As this model is made from steel, the surface
will age and develop surface rust as soon as
it is exposed to the natural weather elements
and also from first use.
To help reduce surface rust, once the
chimenea is cool rub it with an oily
rag (vegetable oil).
If the chimenea surface becomes scratched
or chipped, the damaged area should be
re-coated with a suitable non-toxic high
temperature paint.
If using a chimenea outdoor cover, only
position once the fire has died and the
unit has completely cooled.
DO NOT overload the unit with fuel, if the
flames/fire emits from the front opening or
the chimney there is too much fuel in the unit.
DANGER of carbon monoxide
poisoning - NEVER light this product or
let it smoulder or cool down in confined
spaces.
DO NOT use this product in a tent,
caravan, car, cellar, loft or on a boat.
DO NOT use this chimenea under
any outdoor awnings, parasols, sun
umbrellas or gazebos.
NEVER leave a burning fire unattended.
FIRE HAZARD – Hot embers may emit
while in use. Always keep fire suppression
tools nearby.
ONLY use methods of ignition which are
acceptable in accordance with your local fire
safety codes.
This product is ONLY suitable for use with
untreated wood or logs.
DO NOT use coal or charcoal in
this product.
DO NOT use this chimenea on decking or
any other flammable surfaces such as dry
grass, wood chips, leaves or decorative bark.
This product is NOT intended for
cooking or heating food.
DO NOT use this chimenea as a
furnace - ONLY use as a patio heater.
DO NOT handle or move the chimenea
whilst alight as it will be hot.
ALWAYS USE the safety tool provided and
heat resistant gloves.
ALWAYS keep children and pets at a safe
distance from the chimenea when in use.
Do not allow children to use the product.
Ensure chimenea has a minimum of 7ft
overhead clearance and has a minimum of
7ft clearance from any combustible materials
or items.
This product is intended FOR OUTDOOR
USE ONLY.
DANGER Plastic bags can cause
suffocation. Dispose of all packaging
materials properly.
DANGER Failure to read and observe all
warnings, directions for use and
extinguishing may result in unsafe conditions
leading to damage to property, injury or
death.
The assembled product is heavy and once
positioned must not be moved whilst in use.
If it is necessary to move it once cooled, use
two persons to lift (DO NOT drag) the product.
DO NOT use gasoline, kerosene, white spirit,
lighter fluid, alcohol or other similar chemicals
for lighting or re-lighting the fire.

3
LIGHTING & REFUELLING
•This product is ONLY suitable for use with untreated wood or logs.
•Prepare a stack of loosely crumpled newspaper and place in the firebowl (3).
• Pile finely split dry firewood or kindling on top of the paper.
• To light the newspaper, use long safety matches or a long nosed lighter.
• Once sufficiently alight, add logs or larger pieces of untreated wood to the unit to increase the heat slowly.
• DO NOT overload with fuel, only one or two logs is sufficient.
•ALWAYS use heat resistant gloves when adding fuel as the unit will become very hot.
•ALWAYS ensure that fuel does NOT protrude from the front opening of the product.
EXTINGUISHING
• To extinguish unit – stop adding fuel and allow fire to die or douse with sand. DO NOT use water as this
may damage the product.
STORAGE
• When not in use, and if stored outside, cover the product once it has cooled completely with a chimenea
cover.
• Remove loose paint and rust with a wire brush when needed and re-paint the product using high
temperature paint.
Partslist
WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or
components of the product.
Prior to assembly, read the instructions carefully. Check all parts against the parts list.
Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.
For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
1 (1x) 2 (1x)
A (8x)
3 (1x) 6 (1x)
4 (1x)
5 (1x)
M6 x 12mm bolt
Careandsafeuseguidelines
To extinguish unit – stop adding fuel
and allow fire to die or douse with
sand.
DO NOT use water as this may
damage the chimenea.
For safety reasons, always inspect your
chimenea prior to use for signs of fatigue
and damage and replace your model as
and when necessary.
Always use heat resistant gloves
during use and when adding fuel.
DO NOT overload with fuel, only
one or two small logs is sufficient.
DO NOT use alcohol, intoxicants, narcotics
or any form of non-prescription drug when
handling the product as the ability to safely
assemble and operate will be impaired.
Use care when working near fire, do not stand
over fire when lighting or during use, loose
clothing can catch fire easily. If clothing catches
fire always remember to stop, drop and roll.
B (8x)
•Spare logs can be stored in the base of the chimenea.

AssemblyInstructions
4
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this
product.
ASSEMBLY
STEP 1 - Attach the body section (2) to the base section (5) by screwing 4 x M6 x 12mm bolts (A) with 4 x
washers (B) into the pre-threaded holes in the base section.
STEP 2 - Attach the flue section (1) to the body section (2) by screwing 4 x M6 x 12mm bolts (A) with 4 x
washers (B) into the pre-threaded holes in the flue section.
STEP 3 - Place the firebowl (3) into the body section (2) through the top opening.
STEP 4 - Place the log grate (4) into the base section (5).
Your product is now ready to use but please ensure you have read these instructions thoroughly prior to
use.
Assemblydiagram
1
5
A
A
6
4
3
2
Note A large fire can damage or shorten
the life of the unit.
Note The unit is manufactured with high
temperature paint. However, due to the
nature of steel, some rusting can occur. This
is not a cause for concern and will not affect
the performance of your chimenea.
WARNING Do not leave the unit unattended
while the fire is burning.
Note Check the product for any signs of
damage or disrepair before each use.
Note Follow all local, state and national
codes when using this unit. Contact your
local fire department for information on
outdoor burning.