About this Manual
This operating guide is an integral and essential part
of the product and must be supplied to users. Users
are asked to read the enclosed warnings and cautions
carefully,astheyprovidevaluableinformationconcerning
safety during installation, operation, and maintenance.
Thismanualmustbekeptinasafeplaceandbeavailable
for consultation to new and experienced users alike.
Remove Machine from Packaging
Ensure product’s integrity by inspecting the packaging.
Makingsure it presentsno signsof damagewhich might
have affected the enclosed machine.
Check the machine’s integrity after having carefully
removed the packaging.
Packaging(boxes,plasticbags,foampartsandwhatever
else) must not be left within easy reach of children, due
to the potential danger it represents, nor be discarded
in the environment.
Safety Instructions
Check to see that data on the rating plate corresponds
tothose ofthe main electrical supply whichthe machine
will be attached.
The installation must be performed according to local
electrical and plumbing codes and regulations. The
installation also must comply to the manufacturer’s
instructions, and must be performed by qualified and
authorized personnel.
Incorrect installation may cause injury/damages to
people, animals or objects, for which the manufacturer
shall not be held responsible.
Safe electrical operation of this device will be achieved
only when the connection to the power outlet has been
completed correctly and in observance of all local,
national, and international electrical codes and safety
regulations,andparticularlyby groundingtheunit. Make
suregrounding has been done properlyas it represents
a fundamental safety requirement. Ensure qualified
personnel check such connection.
Furthermore, you must ensure that the capacity of
the available electrical system is suitable for the
maximumpowerconsumptionindicated ontheespresso
machine.
We do not recommend using adapters, multiple plugs
and/orextension cords. Ifyou cannot avoidusing them,
make sure that they are exclusively of the kind which
conforms to local, national, and international electrical
codesandsafetyregulations,beingcareful nottoexceed
thepowerandcurrentratings indicatedonsuchadapters
and extension cords.
Thisdevice must beused exclusively for the functions it
has been designed and built for. Any other application
isinappropriate and dangerous.Themanufacturer shall
not be held responsible for any damages caused by
1.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
improper and/or irrational use.
Using any electrical device requires that certain
fundamental rules be observed. In particular:
-do not touch the device with wet or moist hands and feet
-do not use the device while not wearing shoes
-do not use extension cords in bath or shower rooms
-do not unplug the device from the power outlet by pulling on the
power supply cable
-do not expose the device to atmospheric agents
-do not allow children or untrained people to use this device
Before performing any maintenance and/or cleaning
operations(other thanback flushingthe group),turn the
mainswitchtothe“0”orOFFposition,anddisconnectthe
machine from the electrical network by unplugging the
cord or by switching off the relative circuit breaker. For
anycleaningoperation,followexclusivelytheinstructions
contained in this manual.
In case the machine is operating in a faulty manner or
stops working, disconnect it from the electrical network
(asdescribed in thepreceding point). Do notattempt to
repairit. Contacta qualifiedandauthorizedprofessional
to perform any repair. Any repair must be performed
exclusively by the manufacturer or by an authorized
centre using only original parts. Non compliance with
the above could compromise the safe operation of the
machine.
In order to avoid dangerous overheating problems, it is
recommendedthat the power supplycable be unfurled
completely.
Do not obstruct air intake and exhaust grilles and, in
particular, do not cover the cup warmer tray with cloths
or other items.
Themachine’spowersupplycable mustnot bereplaced
by users. In case the power supply cable becomes
damaged, shut off the machine and disconnect the
machine from the electctrical network by unpluging the
powercordorswitchingofftherelativecircuitbreaker and
close off the water supply; to replace the power supply
cord, contact qualified professionals exclusively.
8.
9.
10.
11.
12.
13.
English
3La Marzocco, S.r.l. Firenze, Italia
General Information
Version 1.00
