Lab-T PIVO-RC-1 User manual

Copyright ⓒ2020. Lab-T, Inc.
User Manual

1
Remote Quick Start Guide

2
General Information
Product name : Pivo remote control.
Model name : PIVO-RC-1
Material : ABS, Rubber, Plastic
Controller : 2.4GHz, RF
Height: 8.8 cm / 2.7 inches
Width: 3.65 cm / 1.4 inches
Weight: 30g / 1.0 ounces
Battery 3V Coin Button Cell
Made in China
Company name : 3i Inc.
homepage : www.getpivo.com
FCC ID : 2AS3QPIVO-RC-1

3
Remote Overview
For convenience, the Pivo Remote comes paired with your
Pivo and is ready to use.
• Up to 15 meter operating range.
• Can be paired to multiple Pivo Pods.
• Comes with 1 replacement 3V battery (coin type).
• For video instructions visit the Pivo Youtube oficcial channel
at www.youtube.com/c/pivoocial
• For downloadable version of this manual, go to help.
getpivo.com

4
With your remote, you have control over various core settings of your Pivo including,
rotation speed, rotation direction, shooting mode, shutter button, and more.
Capture photo/start recording
Increase speed
Rotate clockwise
Decrease speed
Rotate counter-clockwise
Rotate clockwise 1 round
Rotate counter-clockwise 1 round
Stop rotating/ Cancel shooting (may vary depending on the capture mode)
Toggle between photo/video mode (may vary depending on capture mode)
Remote control operation

5
If your Pivo Remote becomes disconnected or if you’ve replaced the Pivo’s
remote control batteries:
2. Press and hold the “+” button on the
remote control until you hear 3 quick
beeps. This indicates that remote control
pairing is complete.
Pairing Remote Control and Pivo
1. IniciatePress the Pivo power button
3 times on quick succession.
The Power Button’s LED lighting will
turn white, indicating that remote
control pairing is initiated.
Power
button
“+”
button

RF Specification
-Frequency : 2440 MHz
-Modulation: GFSK
Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions :
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
* This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
CAUTION : Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.