Lab-T SLX Nano User manual

Copyright ⓒ2022. Lab-T, Inc.
User Manual

SLX-NANO USER MANUAL
SLX-NANO X3 USER MANUAL 1
TITLE
3 PRO
User Manual
SLX-NANO MODEL
NANO NANO

SLX-NANO USER MANUAL
Glove Mount
Charger Cable
SLX-NANO USER MANUAL 2
Composition
SLX-NANO PRO model components.
It may be changed depending on some package keys.
NANO SENSOR

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 3
Register Product
Welcome to SLX. Register your product right away.
After registration, you will receive an E6 Connect license.
Caution ) If you do not register the product, you will not be able to receive
a license, and some AS and exchange may be difficult.
Register Card
Registration STEPS
Use Camera app to scan included QR code Fill out registration
information. E6 license key will be emailed from
[e-mail] and is accessible from the
SwingLogic user portal Set up E6 account at
https://portal.e6golf.com/ using the same email address in
step 2 Redeem license key Download E6 Connect and setup
using the same email address as above
Scan QR with Camera App
You must register your product and serial
number on SwingLogic.us and select the
license type to receive your E6 License key
Or navigate to
https://register.swinglogic.us

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 4
Swing with Nano sensor
If you use a nano sensor, you can get more accurate swing results.
Golf gloves are required when swinging using the nano sensor.
Mount the sensor as shown in the figure below and install it
vertically in the correct position to increase the accuracy.
If you use nano sensor, you can get more accurate swing results.
For accurate use, install it as shown in the figure below.
Insert the glove with the hook facing up as shown in the picture.
Insert the NANO sensor into the mount, turn it exactly 90 degrees
clockwise (USB direction is down)
Be well leveled in the setup position
Swing within 3 seconds of vibration
Raise your wrist up to control the club
1
2
3
4
5
Note) Swing recognition may be difficult depending on the golfer's setup
posture. In this case, adjust the position of your nano sensor to find the
recognized position.

SLX-NANO USER MANUAL
Nano
5V
Adapter is not included
SLX-NANO USER MANUAL 5
Charging and using Power bank
Charge your phone during a round of golf with power bank function
Device Charging
Caution) It can be charged with USB-C type using a 5V - 1AmH charging
adapter. Hybrid charging time 8 hours, Nano charging time 2 hours

SLX-NANO USER MANUAL
Button
Connected
Low Battery
Button
Pairing Button
Disconnected
Nano Button
SLX-NANO USER MANUAL 6
Button and LED Guide
Enjoy the ultra-easy-to-operate buttons and the Nano button
with remote control function.
Nano LED

SLX-NANO USER MANUAL
When the firmware of HW is updated, it is activated with a green button.
SLX-NANO USER MANUAL 7
Firmware Update
Connect SLX-CONNECT > Connect menu > Device Select

SLX-NANO USER MANUAL
Press two fingers at the same time the + / - button continuously
for more than 7 seconds.
SLX-NANO USER MANUAL 8
Device Factory Reset
If device is not connected continuously, any button does not work,
or is incorrect, you can perform a factory reset through the button.
Caution) All stored calibration data will be deleted during factory reset.
Nano

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 9
Using E6 Connect
E6 CONNECT software is available.
Please install and connect according to each SETP.
STEP 1
Create an account and register with us STEP 1 Find the included Card as depicted
below: You can either scan the QR code on your phone's camera
or go to : https://register.swinglogic.us
5-Course Option is your FREE License and one version ( iOS or PC) is included with
Purchase. If you want to UPGRADE to the Expanded Content Subscription @
$10/mo, that is the and Option DETAILS: Expanded Content Subscription now has
~40 Courses, mini games ( darts, closest to pin, battleship...) & Online Play +
multiple modes ( Regular Stroke Play, captains choice, best ball etc...) Check out
our website to learn more about the additional features if this interests you. If you
are an avid golfer...$10/mo for infinite rounds on 40 courses is a pretty good deal
LICENSE OPTIONS EXPLAINED (IMPORTAN)
Create an account and register with Swing Logic

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 10
Using E6 Connect
STEP 2
After download, Run the program to install the software.
Install E6 CONNEC
PC Version: https://portal.e6golf.com/update/e6-connect
iOS Version: You will need to download the software from the app store. If you
search for “E6 CONNECT” then it will pull up and you will be able to download
If you have a License code, press the REDEEM button to enter the code. If you
don't have the code, press SKIP to move on. If you press SKIP, the demo version will
be applied by default. You will also be required to setup an E6 Connect Account
during this process. Please take note and remember your login credentials
STEP 3
Start the E6 Application & Redeem your License

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 11
Using E6 Connect
STEP 4
Enter License Key and press the Enter button
License Activation
Select “SwingLogic -SLX ”
STEP 5
Select Tracking System Device
NOTE : Depending on the license type you are redeeming, the list of available
trackers will be different. If you have redeemed any of the license we have provided,
the list will be much shorter and contain only small sensor based products

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 12
Using E6 Connect
STEP 8
When inside the application's Main Menu. Settings→Simulator→Configure
Calibrate sensor Setting - Maximize Accuracy
STEP 9
Important!
Default Settings should be: Difficulty = Normal, Sensitivity = Normal,
Woods/Iron/Putter = Your Choice based on type of clubs you will be installing sensor
on. It is best to start with 0% distance "boost" to see what your sensor is displaying
initially then adjusting up or down based on simulator output vs expected ball flight.
You can also increase the altitude in Enviromental Settings to have your ball fly further
When you swing, the ball will fly on the screen and Post-Shot dialog is displayed.
Check the swing data on the screen
Important!
For more details on E6 Connect, check the “https://e6golf.com/e6-connect/manual”

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 13
Using E6 Connect
STEP 10
You can change your club selection outside of the E6 Connect Application by click
these up and down buttons
Club selection control
Important!
On the green, it automatically changes to the target direction. (Club side does not
work on green)
In the fairway / driving range, if you click the mode button once, it will change to
"Target Control mode". Afterwards, you can change the target with the up/donw
buttons. If you click the mode button again, it will change to "Club Control mede".
Target Control STEP 11

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 14
Troubleshooting
Check the latest registered information at swinglogic.us/support.
Below is a simple troubleshooting guide.
Replacing and reconnecting the Nano Sensor
If the Hybrid and Nano are not connected or if you need to replace the Nano,
See the "Nano Sensor Replacement" manual.
If you press and hold the "-" button on the Hybrid and Nano sensors, they are
automatically connected.
.
Nano Sensor Swing Recognition
If the nano sensor does not recognize the swing well,
try adjusting the position of the sensor installed on the glove.
Depending on the customer's setup posture, it may not be recognized.
.
Calibration of swing results
If the swing results are very different
try adjusting each result in the SLX-Connect app > Settings > Calibration menu.
Factory reset
If everything does not work,
you can reset it by pressing the "+" / "-" buttons at the same time for 7 seconds.
Read the "Factory Reset" menu.

SLX-NANO USER MANUAL
SLX-NANO USER MANUAL 15
FCC RULES
FCC Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions : (1) This device may not cause
harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.

SLX-NANO USER MANUAL
3 PRO
NANO
16
Ulike Co., Ltd.
SPECIFICATION
Product name : SLX-NANO (Model NO : SLX100N)
Size : 35mm * 35mm * 8 mm (22g)
Bluetooth : 4.0 BLE 2.4GHz 1Mbps
Power Source : Li-Polymer 80mAh
Operating Temperature: -10 °C ~ 50 °C
Storage temperature: 5 °C ~ 40 °C
NANO
Manufacturer: Ulike Co., Ltd. (MADE IN KOREA)
Address : 401, 23, Daehak 1-ro 58beon-gil, Yeongtong-gu,
Suwon-si, Gyeonggi-do, Republic of Korea