Lake Lite LL-BUOY-P User manual

SOLAR REGULATORY BUOY
MODEL: LL-BUOY-P
Lumens
120
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: [phone]
Fax: [phone]
E-mail [email protected]
LIGHT CHARACTERISTICS
Light Source 8-Ultra-High intensity LEDs.
Lumens output 35/70/90/120 Lumens *Varies with Color &
Power / Brightness Settings
Available LED Colors WHITE ( B, G, A, WW, via Special Order)
Light Mode Options Constant
Visible Range 1- 2+ Nautical Mile *Varies with LED color &
Brightness Settings
Horizontal Output (degrees) 360 Deg.
Vertical Divergence (degrees) 100-180 Deg. Various with Mounting
LED Life Expectancy (hours) > 100,000 hrs
ELECTRICAL CHARACTERISTICS
Circuit Protection Integrated
Nominal Voltage (v) 3.2v
Autonomy (hours) 16-20hrs *On full Charge * Varies With
Brightness Settings & Conditions
Temperature Range -10 to 70 C
SOLAR CHARACTERISTICS
Solar Module Type Multicrystalline or Monocrystalline
Power (watts) 2.2w
Solar Module Efficiency (%) 16-17%
POWER SUPPLY
Battery Type High Capacity LiFePo4
Battery Size 3pcs Parallel LiFePo4
Battery Capacity (mAh) 3000mA
Nominal Voltage (v) 3.2v
Battery Service Life 3-6 years (Varies with local Environment)
Battery Service Access Yes: User Changeable / Replaceable
PHYSICAL CHARACTERISTICS
Body Material Marine Grade Aluminum + Powder Coat
Lens Material UV-Stabilized Polycarbonate
External Lens Design Horizontal Lenticular
Internal Lens design Vertical Lenticular
WaterProof Rating IP 68
Mounting Fits on Pilings or flat surfaces 8” diameter
and Larger
Height 106.5mm
Width / Diameter 203mm
Weight 4 lbs
OPTIONS
Custom Options, Sizes, & Colors Please Contact
Custom Hardware & Mounting Please Contact
* Information subject to change without notice
Solar Powered
Regulatory Buoy
Model: LL-SBL-BALL
The world's first Solar Powered Silhouette Illuminating
Buoys are the safest available. Not only can you see the
buoy at night, but, you can actually read the
message! The fun doesn’t stop there! This unit is
equipped with Lake Lites new patent pending magnet
technology! Swipe the magnet over the solar panel at
night to change between 7 brightness levels for user
adjustable brightness and run times. Hold the magnet for
5-seconds and you can change between White, Blue, or
Amber illuminating LEDs! That’s right a simple swipe and
you can adjust the brightness/run time and buoys
illuminating color!
The powerful solar panel collects the suns energy during
the day. At night the integrated circuit automatically
turns on the super bright LED which illuminates the
entire body of the buoy. The labels create shadows of the
message, logos, and bands, that allow boaters to visibly
read the buoys message at night.
www.lakelite.com

CAUTION: PLEASE KEEP OUR ENVIORNMENT CLEAN! BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
Installing Batteries & Cover
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: [phone]
Fax: [phone]
E-mail [email protected] www.lakelite.com
Mounting Hardware Suggestions – Not Included
LiFePo4 Type Battery:
Volts: 3.2v Cell Size: 18500 Capacity: 3100mA
DO NOT USE: standard 1.2v NiMh or NiCd type Rechargeable
batteries or they will be damaged!
Caution! When plugging battery connectors
together, align notches before connecting both
connectors. Failure to do so could result in
permanent damage to the light.
Battery Information
BATTERY MAINTENANCE
For prolonged storage when not using the product please follow these procedures.
1. Charge batteries inside product on sunny day.
2. Before nightfall open your light and fully disconnect the battery from the product.
3. Store battery and product in warm/dry location.
4. Note: Batteries can be damaged from sub-zero temperatures when not in use.
SOLAR REGULATORY BUOY
MODEL: LL-BUOY-P
Chain Chain Links 2pcs Standard Bricks

PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: [phone]
Fax: [phone]
E-mail [email protected]
Top
Silicone Pad
Battery Cover
Cover Screws
Top Screws
Use the provided wrench to separate your light:
The battery is not connected when shipped.
Connect Battery: Caution! When plugging battery connectors
together, align notches before joining both connectors.
Forcing or connecting backwards will damage the light.
3.2v LiFePo4
3100mA
Battery
MALE NOTCH FEMALE NOTCH
2
NEW MAGNET
SWITCH OPERATION
3.2v LiFePo4
3100mA
Battery
Alan Wrench
SOLAR REGULATORY BUOY
MODEL: LL-BUOY-P
www.lakelite.com
Change brightness/power level at night by waving the
magnet over the solar panel
Holding the magnet for 5-seconds in the activation area
will change to the next LED color. You may then change
between brightness/power levels on that LED color.
CHANGING BRIGHTNESS LEVELS
Wave the magnet over the solar
panel at night until you find the
activation area which changes
the brightness level.
Make a quick up & down motion
over this area to change between
brightness levels and OFF.
NOTE: moving too slowly may
activate the magnet switch
multiple times going through
multiple levels at once. A quick
motion will help!
CHANGING LED COLORS
Hold the magnet over the
activation area for 5 seconds
until the LED color changes
Power Setting * Run Times
100% 6-8 hrs
80% 7-9 hrs
65% 10-12 hrs
50% 13-14 hrs
35% 15-17hrs
20% 17-22 hrs
OFF OFF
Holding for 5-seconds Changes LED color
* Note: Run times will vary significantly based on
factors such as; Sun Exposure, Season, Geographic
Location, Shading, Installed Location/Position, Battery
Condition, Brightness Setting, etc… The following run
times should only be used as a general reference and
are not guaranteed. Consider your local environment.
3 4
1

Attach the ballast pole to the bottom of the buoy with the
4 large hex bolts and lock washers.
7 8
Use the provided wrench and screws to secure the silicone
pad and battery cover. Fully tighten screws to ensure the
chamber is water proof.
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: [phone]
Fax: [phone]
E-mail [email protected]
Use the provided foam tape in the channel around the top
of the buoy. Be sure to overlap the two ends slightly.
3.2v LiFePo4
3000mA
Battery
Silicone Pad
Battery Cover
Cover Screws
5 6
www.lakelite.com
www.solarpilinglites.com
Alan Wrench
Use provided wrench and top screws to attach the light to
the buoy top. The seal must be in the correct position
before tightening down the top to the base.
Foam Tape
SOLAR REGULATORY BUOY
MODEL: LL-BUOY-P

Required Hardware
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: [phone]
Fax: [phone]
E-mail [email protected]
WARNING:
Be sure to use chain as
(rope will wear on the
brick and break)
1-Red Brick
(Ballast Weight)
1-Red Brick
(Anchor Weight)
4pcs Chain Quick Links
Chain
2pcs Standard Bricks
Lake Bottom
Water Level
SOLAR REGULATORY BUOY
MODEL: LL-BUOY-P
www.lakelite.com