Lake Lite LL-SP-10W User manual

Dual 10w
MtiA
Great for charging a single 12v battery
Great for charging dual batteries used in
Great for charging dual batteries used in a
Single 10w
MountingArm
M
oun
ti
ng
A
rm
Single 20w
MountingArm
Great
for
charging
a
single
12v
battery
operated lift system.
Great
for
charging
dual
batteries
used
in
a 24v lift system, or charging a single
12v battery on two boat lifts that are
near each other.
Great
for
charging
dual
batteries
used
in
a
24v lift system. (Requires automatic 12/24v
charge controller). Also Great for charging a
single 12v battery lift system that is used
frequently with larger lifts and boats.
(Requires automatic 12/24v charge controller)

Charging options for all lifts& systems Fits Round, Square, & Rectangle Lifts Strong Angle Adjustable

291mm
351mm
291mm
351mm
291mm
682mm

LLSP
10
12
Single 10 watt 12v solar panel
charging a single 12v battery
LLSP
-
10
w-
12
v
charging
a
single
12v
battery
+-
(
) Negative to System
(
-
)
Negative
to
System
(+) Positive to System
(+)
Positive
to
System

LLSP-20w-12v
Single 20 watt 12v solar panel
charging a single 12v battery
charging
a
single
12v
battery
NOTE: Charge Regulator Required +-
Charge Controller
+
-
+
-
(-) Negative to System
(+) Positive to System

LLSP-20w-12v
Single 20 watt 12v Solar panel
Charging parallel 12v Batteries
Charging
parallel
12v
Batteries
NOTE: No Charge regulator required.
+
-
(+) Positive to System
(-) Negative to System
jumper

LLSP-20w-24v
Single 20 watt 24v solar panel
charging two 12v batteries in
charging
two
12v
batteries
in
a 24v configuration
NOTE:
Specially designed solar panel for 24v systems only: Do
+
-
()P iti t S t
NOTE:
Specially
designed
solar
panel
for
24v
systems
only:
Do
not use this solar panel on a single 12v battery as it will damage
the battery.
(-) Negative to System
(
+
)
P
os
iti
ve
t
o
S
ys
t
em
jumper

Two 10 watt 12v solar panels charging
two 12v batteries in a 24v configuration
LLSP
-
10w
-
12v
LLSP-10w-12v
two
12v
batteries
in
a
24v
configuration
(-) Negative to System
LLSP
-
10w
-
12v
(+) Positive to System
jumper
jumper

Two 10 watt 12v solar
panels wired in series
LLSP-10w-12v
LLSP-10w-12v
panels
wired
in
series
to charge two 12v
batteries in a 24v
batteries
in
a
24v
configuration
(-) Negative to System
jumper
(+) Positive to System

Two 10 watt 12v solar panels:
-One Char
g
in
g
Lift Batter
y
LLSP
-
10w
-
12v
LLSP-10w-12v
gg y
-One Charging Boat Battery
LLSP
-
10w
-
12v
(-) Negative to System
(
+
) Positive to System
()
Positive
to
System

STOP: It is a good idea to
assembled all parts before
tightening the bolts!
1. Attach both L Shaped
braces long ways on the
solar panel with short bolts.
2. Attach the mounting arm in
the desired position between
the L Shaped braces with
the long bolt
the
long
bolt
.
3. Tighten the long bolt First so
that the L-Shaped braces
are tight to the mounting
are
tight
to
the
mounting
arm.
4. Tighten all 4 of the short
bolts to the solar panel
bolts
to
the
solar
panel
.

STOP: It is a good idea to
assembled all parts before
tightening the bolts!
1. Attach both L Shaped
braces long ways on the
solar panel with short bolts.
2. Attach the mounting arm in
the desired position between
the L Shaped braces with
the long bolt
the
long
bolt
.
3. Tighten the long bolt First so
that the L-Shaped braces
are tight to the mounting
are
tight
to
the
mounting
arm.
4. Tighten all 4 of the short
bolts to the solar panel
bolts
to
the
solar
panel
.

STOP: It is a good idea to
assembled all parts before
tightening the bolts!
1. Attach both L Shaped
braces short ways on the
solar panel with short bolts.
2. Attach the mounting arm in
the desired position between
the L Shaped braces with
the long bolt
the
long
bolt
.
3. Tighten the long bolt First so
that the L-Shaped braces
are tight to the mounting
are
tight
to
the
mounting
arm.
4. Tighten all 4 of the short
bolts to the solar panel
bolts
to
the
solar
panel
.