Lalizas Safelite IV User manual

Lifejacket light assembly instructions on ISO & SOLAS lifejackets
Αpplicable for:
Product 72349
Step 1:
Put the black clip underneath the
fabric which holds the whistle.
Step 2:
Place the light at an angle and press
it down so that the two pieces lock
together.
Step 3:
Check that the light has been
placed as in the above picture
and that it cannot be removed
from the fabric by pulling it.
72349
LALIZAS Lifejacket LED Flashing light “Safelite IV”
ON-OFF water activated, USCG, SOLAS/MED
72348
LALIZAS Lifejacket LED ashing light
“Alkalite II” ON-OFF water activated, L.S.A. Code
The assembly steps are the same for product 72348.
Instructions
DELTA: (71108, 71109, 71201)
OMEGA: (71103, 71105)
ZETA: (72399, 72400)
SIGMA: (71094, 71096, 71097, 72081, 720811, 72154,
72560, 725601, 72561, 725611, 73580, 73581, 73650)
ALPHA: (71098, 71100, 71101, 71102)
FOR LIFEJACKETS:
LAMDA: (73584, 73629, 71107, 71216, 72114, 72115)
www.lalizas.com
LALIZAS

The assembly steps are the same for product 72348.
The assembly steps are the same for product 72348.
Instructions
www.lalizas.com
FOR LIFEJACKETS:
KAPPA: (72194, 72195, 73582)
THETA: (72196, 72197, 73583)
Step 2:
Place the light at an angle and press it
down so that the two pieces lock together.
Step 1:
Insert the black clip into the elastic
tape as shown in the picture above.
Step 3:
Check that the light has been placed as
in the above picture and that it cannot be
removed from the fabric by pulling it.
FOR LIFEJACKETS:
VITA: (72326)
(72737, 72843 soon to be released)
Product 72349
Product 72349
Step 1:
Insert the black clip underneath the
fabric as shown in the picture above.
Step 2:
Place the light at an angle and press it
down so that the two pieces lock together.
Step 3:
Check that the light has been placed as
in the above picture and that it cannot be
removed from the fabric by pulling it.
LALIZAS