LaMotte 5-0066 User manual

Code 5-0066
BLUETOOTH MOBILE PRINTER
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

3
TABLE OF CONTENTS
EXTERNAL APPEARANCE..........................................................4
PRINTER SET UP........................................................................5
Unpacking................................................................................5
Selecting a Location .............................................................5
Connecting the Power Adapter...........................................5
Bluetooth Connection...........................................................6
LOADING THE PAPER.................................................................6
GENERAL SPECIFICATIONS ......................................................7
BATTERY .....................................................................................9
Replacing the Battery Pack.................................................9
Charging Procedure ........................................................... 10
CONTROL PANEL......................................................................11
ERROR INDICATION .................................................................12
STATEMENT OF LIMITED WARRANTY ....................................13
EXTENT OF WARRANTY...........................................................14
LIMITATION OF LIABILITY........................................................14
WARNINGS................................................................................15
FEDERAL COMMUNCATIONS COMMISSION
(FCC) STATEMENT ...................................................................16
INDUSTRY CANADA CLASS A EMISSIONS COMPLIANCE ....17
EUROPEAN UNION - EMSSION DIRECTIVE ...........................17
EC DECLARATION OF CONFIRMITY ........................................19
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

4
EXTERNAL APPEARANCE
Paper Feed Button
Battery LED
(indicates
battery charge)
Error LED
(indicates
Error condition)
Power LED
(indicates
printer status)
Paper Cover
Power
Button
Battery
Cover
Top
View
Bottom
View
Power
Connection
USB Port
Bluetooth, LED,
(indicates
Bluetooth
status)
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

5
PRINTER SET UP
Unpacking
The items illustrated below are included in the
package with the printer.
Paper Roll
(may be installed in printer)
Battery Power Adapter
Selecting a Location
1. Protect the printer from excessive heat such
as direct sunlight or heaters.
2. Avoid exposing the printer to excessive dust
and humidity.
3. Place the printer on a firm, level surface free
from vibration or shock.
Connecting the Power Adapter
This printer requires an external power supply. An
approved Class 2 power supply is required for the
operation of this product.
1. Make sure the power is turned off.
2. Insert the output plug of the power adapter
into the printer DC jack.
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

6
3. Plug in the power adapter to an outlet.
4. Only use the supplied adapter.
Bluetooth Connection
Follow the instructions in the meter manual for
using the Bluetooth Mobile Printer with the meter.
LOADING THE PAPER
Use a paper roll that meets the specifications. Do
not use paper rolls that are glued to the core. Make
sure data is not being transmitted to the printer
while loading paper.
1. Open the printer paper cover by gently lifting
the plastic tabs located on the cover.
2. Remove the empty paper roll core.
3. Align the paper so it is straight and sits in
the paper cradle correctly. The core must be
parallel to the platen, not skewed, so it can
roll freely.
4. Make sure the paper is curling up.
5. Unroll the paper so that the leading edge of
the paper extends at least two inches beyond
the printer tear bar.
6. Close the printer paper cover and make sure
it snaps into place on both ends.
7. Press the FEED button to make sure the roll
is properly loaded. If the paper wrinkles or
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

7
creases on the edges of the paper, load the
paper again.
8. Tear off the excess paper against the serrated
edge.
To replace the paper use 58 mm wide thermal
paper with the same specifications in the General
Specifications chart.
Platen
Paper Core
GENERAL SPECIFICATIONS
Print method Thermal line printing
No. of columns 32 (Font A) and 42 (Font B)
Printing speed 70 mm/sec
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

8
No. of dots per line 384 at 8 dots/mm resolution
Dot Size 0.125 (W) x 0.125 (H) mm
Character size
(Font Size)
1.125 x 3.0 mm (9 x 24), 1.5
x 3.0 mn (12 x 24)
Font size 12 x 24 (Font A) and 9 x 24
(Font B)
Bluetooth Bluetooth 1.1 compliant
Battery Lithium-Ion 7.4V / 1200 mAh
Paper Width 58 X 0.5 mm
Diameter 30 mm (Max)
Thickness 60~80 μm
Max Print Width 48 mm
Power supply 9 VDC ±10% 2.0 A
Dimensions (mm) 85 (W) x 115 (D) x 38 (H)
Reliability (MCBF) 15 million Lines, 50 million
Pulses, 50 km
Weight 205 g (0.88 lb)
Safety approvals FCC, CE
Operating
condition
-10 to 50 °C ; 20 to 85 % RH
Storage condition -20 to 70 °C ; 5 to 95 % RH
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

9
BATTERY
Replacing the Battery Pack
CAUTION: The cell used in this device may present
a fire or chemical burn hazard if mistreated. Do
not disassemble, heat above 100 °C (212 °F), or
incinerate.
1. Turn the printer off.
2. Turn the printer over. Open the battery lid by
lifting the tab with a finger. Avoid using a
sharp object.
3. Remove the battery pack
4. Insert the new battery pack. Make sure the
battery contacts are aligned with the printer
compression connectors. The contacts
are keyed to ensure the right polarity is
maintained.
5. Replace the battery cover.
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

10
Dispose of used batteries properly. Keep away from
children.
CAUTION: The battery used in this device may
present a fire or chemical burn hazard if not
handled properly.
◊ Do not disassemble the battery pack.
◊ Do not short-circuit the battery pack
terminals.
◊ Do not throw the used battery pack into a
fire.
Charging Procedure
The printer is equipped with a lithium-ion battery
pack. Although the battery pack is charged when it
is shipped from the factory, the battery may have
discharged. Recharge the battery pack with the
appropriate AC adapter before using the printer.
Turn the printer off and plug the adapter into an
AC outlet and connect the cable to the printer.
The battery pack takes 6-8 hours to become fully
charged.
NOTES:
◊ Turn the printer off before charging the
battery pack.
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30

11
◊ Do not charge the pack longer than 24
hours or the batteries may deteriorate.
◊ The printer can be used immediately after
the adapter is connected.
◊ The room temperature should be between
5 and 40 °C during charging.
◊ With the Bluetooth options, the true charge
state of the battery can only be determined
with the printer power turned off.
CONTROL PANEL
The control panel features two buttons and four
LED’s
Charger LED
Error LED Power LED
Paper Feed Button
Power Button
Power Bluetooth
POWER BUTTON: The POWER button with the
icon is located on the top of the printer. Use this
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30