Lancaster TT415Y19017 User manual

NEW!
Follow along with your smartphone
to make assembly even easier!
www.vminnovations.com877-472-4296
Assembly Instructions
MODEL
TT415Y19017
VM Innovations

FOR A QUICKER & EASIER
ASSEMBLY & WARRANTY EXPERIENCE
Before you begin
Step 1: Scan the QR code below and download the free BILT app.
Step 2: Once in the BILT app, search by product name or model number and select.
Step 3: Begin easy assembly of this product using the BILT 3D-guided interactive
instructions.
TTT415

This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited
warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer.
The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental
damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights vary from one State (province) to
another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all
requests for warranty service, please feel free to contact our Consumer Service Department.
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Lancaster, cannot
handle the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE!
English
LIMITED 90 DAYS WARRANTY
TT415Y19017 www.vminnovations.com1(Continued on the next page.)
LANCASTER
877-472-4296
www.vminnovations.com
Customer Service Toll Free
Please Contact
Mon.-Fri., 9:00 a.m. to 5:00 p.m. EST
For additional resources and Frequently Asked Questions, please visit us at
DO NOT RETURN TO STORE
WE ARE READY TO HELP

English
TOOLS REQUIRED
TT415Y19017 www.vminnovations.com2(Continued on the next page)
This product is intended for INDOOR use only.
Please do not sit, climb or lean on the product.
Please do not drag the product when moving it in order to avoid damaging the legs.
Please only use spray furniture polish to clean the exterior surfaces of the product.
This is not a child's toy, adult supervision is required for children playing this game.
1.
2.
3.
4.
5.
- Not Included
- Not Included
- Included
- Included
RECOMMENDED
IMPORTANT NOTICE!
Adult Assembly Required.
CHOKING HAZARD - This item contains small parts. Not suitable for children under 3 years.
WARNING
Phillips Screwdriver
Standard (Flat Head Screwdriver)
Wrench
Allen Key
Electric Screwdrivers may be helpful during assembly; however, please set a low
torque and use extreme caution.
X2
At least 2 adults needed No children in assembly
area
Keep away from pets in
assembly area
Do not use or keep
product outdoors. For
indoor use only. No
wet/humid conditions.
Power Tools: Set to Low Torque
High Torque Over Tightened

Bracket
17
x6
FOR FIG. 2
Wood Block Spacers
18
x2
FOR FIG. 16
Plastic Corner
19
x4
FOR FIG. 8, 14
Safety
Strap - Short
14
x2
FOR FIG. 3 15
x8
FOR FIG. 4, 10
Leg Bracket - BLeg Bracket - A
16
x4
FOR FIG. 5, 11
Logo Panel with
Frame
9
x2
FOR FIG. 17
Table Lock
10
x2
FOR FIG. 19
Net
11
x1
FOR FIG . 22
Net Post
12
x2
FOR FIG . 22
End Panel
5
x2
FOR FIG. 9, 15
Safety
Strap - Long
13
x1
FOR FIG. 3
Side Panel
6
x4
FOR FIG. 9, 15
Linkage Tube
with Stop Bracket
7
x2
FOR FIG. 6, 13
Linkage Tube
8
x2
FOR FIG. 7, 12
Table Surface - 2
2
x2
FOR FIG. 1
Curved Outer Leg
with Cap
3
x2
FOR FIG. 4, 10
Curved Inner Leg
with Cap
4
x2
FOR FIG. 4, 10
Table Surface - 1
1
x2
FOR FIG. 1
PART NUMBER FIG NUMBER
QUANTITY
PART
PART NAME
English
PARTS IDENTIFIER
TT415Y19017 www.vminnovations.com3(Continued on the next page)
Wheel
20
x4
FOR FIG. 17

x88
x4
Outer Leg Cap
P1
x4
FOR FIG. 4, 10
Inner Leg Cap
P2
x4
FOR FIG. 4, 10
PRE-INSTALLED PARTS
M6 Washer
A5
x28
FOR FIG. 6, 7, 12, 13, 17, 19
M6 Nut
A7
x10
FOR FIG. 6, 7, 12, 13, 19
FOR FIG. 17
M5x12mm Screw
A8 FOR FIG. 2, 4, 5, 10, 11
Spacer
A6
x8
FOR FIG. 6, 7, 12, 13
“U” Bolt
A4 FOR FIG. 17
M4x12mm Screw
A9
x47
FOR FIG. 3, 8, 9, 14, 15 FOR FIG. 19
Spring Lock
Washer
A11
x8
“T” Washer
A10
x2
x8
FOR FIG. 17
Butterfly Bolt
A3
M6x42mm Bolt
A2
x8
FOR FIG. 6, 7, 12, 13
M6x38mm Bolt
A1
x2
FOR FIG. 19
Allen Key
A13
x1
Wrench
A12
x1
English
HARDWARE
TT415Y19017 www.vminnovations.com4(Continued on the next page)
BEFORE ASSEMBLY
Find a clean, level place to begin the assembly of your product.
Verify that you have all listed parts as shown on the parts list pages. If any parts are missing, call our customer service.
1.
2.

FIG. 1
x2
1
x2
2
2
2
Note: The playing surface should face
down when assembling.
1
1
Player End
Player End
Player End
Center End Center End
English
ASSEMBLY
TT415Y19017 www.vminnovations.com5(Continued on the next page)

FIG. 2
x6
17
x24
A8
2
2
1
1
Player End
Player End
Center End
17
17
17
17
A8
2
17
2
1
1
17
A8
Note: Each table section has pre-drilled holes on
the inside of each section. The table top section (1 &
2) will line up next to each other. The bracket (17)
will match the pre-drilled holes as shown in FIG. 2.
English
ASSEMBLY
TT415Y19017 www.vminnovations.com6(Continued on the next page)

14
13
A9
A9
14
2
2
1
1
FIG. 3
x1
13
x2
14
x3
A9
2
1
English
ASSEMBLY
TT415Y19017 www.vminnovations.com7(Continued on the next page)
Note: The notch of leg bracket A (15), will
face towards the center of the table.
15
A8 15
15
P1
P2
4
3
Pre-installed
x2
P1
Pre-installed
x2
P2
FIG. 4
x1
3
x1
4
x4
15
x24
A8

FIG. 6
x1
7
x2
A2
x4
A5
x2
A6
x2
A7
x1
A12
x1
A13
English
ASSEMBLY
TT415Y19017 www.vminnovations.com8(Continued on the next page)
2
1
FIG. 5
x2
16
x8
A8
16
A8
16
4
3
7
7
4
3
A2
A5
A6
A7 A5
Note: Place linkage tube with stop bracket
(7) on the inner leg from the outside and
outer leg from the inside.
4
3

FIG. 8
x2
19
x6
A9
FIG. 7
x1
8
x2
A2
x4
A5
x2
A6
x2
A7
x1
A12
x1
A13
English
ASSEMBLY
TT415Y19017 www.vminnovations.com9(Continued on the next page)
8
A6 A5
48
3
A7
A2 A5
Note: Place linkage tube (8) on the
inner leg from the outside and
outer leg from the inside.
A9
19
A9
19
4
3

FIG. 9
x1
5
x2
6
x16
A9
English
ASSEMBLY
TT415Y19017 www.vminnovations.com10(Continued on the next page)
6
A9
4
3
5
6
Pre-installed
x2
P1
Pre-installed
x2
P2
FIG. 10
x1
3
x1
4
x4
15
x24
A8
Note: The notch of leg bracket A (15), will
face towards the center of the table.
15
A8
2
1
15
15
3
4
P2
P1

FIG. 11
x2
16
x8
A8
16
A8
English
ASSEMBLY
TT415Y19017 www.vminnovations.com11(Continued on the next page)
16
FIG. 12
x1
8
x2
A2
x2
A6
x2
A7
x4
A5
x1
A12
x1
A13
A5
A2
8
3
4
A6
A5
A7
Note: Place linkage tube (8) on the inner
leg from the outside and outer leg from
the inside.
8

FIG. 14
x2
19
x6
A9
English
ASSEMBLY
TT415Y19017 www.vminnovations.com12(Continued on the next page)
FIG. 13
x1
7
x2
A2
x4
A5
x2
A6
x2
A7
x1
A12
x1
A13
Note: Place linkage tube with stop bracket
(7) on the inner leg from the outside and
outer leg from the inside.
7
A6
A5
A5
A7
A2
7
19
A9
19

FIG. 16
x2
18
18
Note: Use the wood block spacers to
align the center gap before assembling
the logo panel.
FIG. 15
x1
5
x2
6
x16
A9
English
ASSEMBLY
TT415Y19017 www.vminnovations.com13(Continued on the next page)
6
5
6
A9
18
18

FIG. 17
x2
9
x4
20
x8
A3
x8
A5
x4
A4
x8
A11
English
ASSEMBLY
TT415Y19017 www.vminnovations.com14(Continued on the next page)
Note: Both logo panels should be inverted when
assembling.
9
9
9
9
9
4
A3
A5
A11
A4
20

DO NOT lean too much weight on the
wheels while lifting the table.
Lift the table.
Fold the table.
Two adults required. Hold up the table on its side.
Make sure to buckle the Safety Straps.
Lock Wheels.
/ Bloquee las ruedas.
FIG. 18
FIG. 18A
FIG. 18C
FIG. 18E
FIG. 18B
FIG. 18D
FIG. 18F
English
ASSEMBLY
TT415Y19017 www.vminnovations.com15(Continued on the next page)
14
13

FIG. 20
FIG. 19
x2
10
x2
A10
x4
A5
x2
A1
x2
A7
x1
A12
x1
A13
English
ASSEMBLY
TT415Y19017 www.vminnovations.com16(Continued on the next page)
14 13
Note: Unbuckle the Safety Strap before
unfolding the table.
10
Note: Repeat the above steps
for the other table half.
Note: Install the Table Lock accordingly.
A7
A5A10
10
A5A1
4
4

FIG. 21
10
10
Note: Unlock the table locks.
English
ASSEMBLY
TT415Y19017 www.vminnovations.com17(Continued on the next page)
Note: Pull the legs out from the table top
and lower the table half to the floor.

FIG. 22
x1
11
x2
12
12
12
Note: Attach the post and the net.
English
ASSEMBLY
TT415Y19017 www.vminnovations.com18(Continued on the next page)
11
12
11