Land Pride RTR2570 User manual

© Copyright 2009 Printed
!
Table of Contents
Read the Operator’s manual entirely. When
you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
Cover photo may show optional equipment
not supplied with standard unit.
22236
311-251M
RTR2570
Rotary Tillers
Operator’s Manual
2/16/09

Land Pride
Table of Contents
RTR2570 Rotary Tillers 311-251M 2/16/09
©Copyright 2009 All rights Reserved
Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land
Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves
the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Land Pride is a registered trademark.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
Table of Contents . . . . . . . . . . . . . . . . . . . .0
Important Safety Information . . . . . . . . . . .1
Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look For The Safety Alert Symbol . . . . . . . . . . . . .1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . .7
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 7
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 7
Section 1: Assembly and Set-up . . . . . . .8
Tractor Requirements . . . . . . . . . . . . . . . . . . . . . .8
Torque Requirements . . . . . . . . . . . . . . . . . . . . . . 8
3-Point Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Driveline Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Parking Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Spring Tines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tractor Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . 10
Driveline Installation . . . . . . . . . . . . . . . . . . . . . . . 10
Driveline Length . . . . . . . . . . . . . . . . . . . . . . . . . .11
Driveline Minimum Length . . . . . . . . . . . . . . . .11
Driveline Maximum Allowable Length . . . . . . . 12
Top Drive Sprocket Torquing . . . . . . . . . . . . . . . . 12
Down Pressure Kit . . . . . . . . . . . . . . . . . . . . . . . . 12
Section 2: Adjustments . . . . . . . . . . . . . .13
Drive Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Skid Shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rear Deflector & Down Pressure Kit . . . . . . . . . . 13
Section 3: Operating . . . . . . . . . . . . . . . .14
Pre-Start Checklist . . . . . . . . . . . . . . . . . . . . . . . . 14
Operator’s Responsibilities . . . . . . . . . . . . . . . . . 14
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General Notes for Field Operations . . . . . . . . . . . 15
General Operating Instructions . . . . . . . . . . . . . .15
Section 4: Maintenance and Lubrication 16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Tine Replacement . . . . . . . . . . . . . . . . . . . . . . . .16
Driveline Protection . . . . . . . . . . . . . . . . . . . . . . .16
Clutches With 4 Adjusting Nuts . . . . . . . . . . . . . .16
Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . .16
Clutch Disassembly & Assembly . . . . . . . . . . .17
Clutches With 8 Hex Socket Bolts . . . . . . . . . . . .18
Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . .18
Clutch Disassembly & Assembly . . . . . . . . . . .18
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Driveline U-Joint . . . . . . . . . . . . . . . . . . . . . . .20
Driveline Shaft . . . . . . . . . . . . . . . . . . . . . . . . .20
Bearing on Left End of Rotor Shaft . . . . . . . . .20
Chaincase . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Section 5: Specifications & Capacities .22
Section 6: Features & Benefits . . . . . . . .23
Section 7: Troubleshooting . . . . . . . . . .24
Section 8: Appendix . . . . . . . . . . . . . . . .25
Torque Values Chart . . . . . . . . . . . . . . . . . . . . . .25
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Table of Contents

1
2/16/09 RTR2570 Rotary Tillers 311-251M
Land Pride
Important Safety Information Table of Contents
These are common practices that may or may not be applicable to the products described in
this manual.
Important Safety Information
Safety at All Times
Thoroughly read and understand
the instructions given in this
manual before operation. Refer to
the “Safety Label” section, read
all instructions noted on them.
Do not allow anyone to operate
this equipment who has not fully
read and comprehended this
manual and who has not been
properly trained in the safe
operation of the equipment.
▲Operator should be familiar with
all functions of the unit.
▲Operate implement from the
driver’s seat only.
▲Make sure all guards and shields
are in place and secured before
operating implement.
▲Do not leave tractor or implement
unattended with engine running.
▲Dismounting from a moving
tractor could cause serious injury
or death.
▲Do not allow anyone to stand
between the tractor and
implement while backing up to the
implement.
▲Keep hands, feet, and clothing
away from power-driven parts.
▲Wear snug fitting clothing to avoid
entanglement with moving parts.
▲Watch out for wires, trees, etc.,
when raising implement. Make
sure all persons are clear of
working area.
▲Turning tractor too tight may
cause implement to ride up on
wheels. This could result in injury
or equipment damage.
▲Do not carry passengers on
implement at any time.
!Look For The Safety Alert Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control and accident prevention
are dependent upon the awareness, concern,
prudence and proper training of personnel involved in
the operation, transport, maintenance and storage of
equipment.
Be Aware of
Signal Words
A Signal word designates a degree or
level of hazard seriousness. The
signal words are:
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury. This
signal word is limited to the most
extreme situations, typically for
machine components that, for
functional purposes, cannot be
guarded.
!DANGER
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may also
be used to alert against unsafe
practices.
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury. It
may also be used to alert against
unsafe practices.
!WARNING
!CAUTION
For Your Protection
▲Thoroughly read and understand
the “Safety Label” section, read all
instructions noted on them.
Shutdown and Storage
▲Lower machine to ground, put
tractor in park, turn off engine, and
remove the key.
▲Detach and store implements in a
area where children normally do
not play. Secure implement by
using blocks and supports.
OFF
REMOVE

2RTR2570 Rotary Tillers 311-251M 2/16/09
Land Pride
Important Safety Information Table of Contents
Transport
Machinery Safely
▲Comply with state and local laws.
▲Maximum transport speed for
implement is 20 mph. DO NOT
EXCEED. Never travel at a speed
which does not allow adequate
control of steering and stopping.
Some rough terrain require a
slower speed.
▲Sudden braking can cause a
towed load to swerve and upset.
Reduce speed if towed load is not
equipped with brakes.
▲Use the following maximum
speed - tow load weight ratios as
a guideline:
20 mph when weight is less
than or equal to the weight of
tractor.
10 mph when weight is double
the weight of tractor.
▲IMPORTANT: Do not tow a load
that is more than double the
weight of tractor.
Use Safety
Lights and Devices
▲Slow moving tractors, self-
propelled equipment, and towed
implements can create a hazard
when driven on public roads. They
are difficult to see, especially at
night.
▲Flashing warning lights and turn
signals are recommended
whenever driving on public roads.
Practice Safe Mainte-
nance
▲Understand procedure before
doing work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.
▲Work in a clean dry area.
▲Lower the implement to the
ground, put tractor in park, turn off
engine, and remove key before
performing maintenance.
▲Allow implement to cool completely.
▲Do not grease or oil implement
while it is in operation.
▲Inspect all parts. Make sure parts
are in good condition & installed
properly.
▲Remove buildup of grease, oil or
debris.
▲Remove all tools and unused
parts from implement before
operation.
These are common practices that may or may not be applicable to the products described in
this manual.
Keep Riders
Off Machinery
▲Riders obstruct the operator’s
view, they could be struck by
foreign objects or thrown from the
machine.
▲Never allow children to operate
equipment.

3
2/16/09 RTR2570 Rotary Tillers 311-251M
Land Pride
Important Safety Information Table of Contents
Prepare for Emergencies
▲Be prepared if a fire starts.
▲Keep a first aid kit and fire
extinguisher handy.
▲Keep emergency numbers for
doctor, ambulance, hospital and
fire department near phone.
911
Wear
Protective Equipment
▲Protectiveclothing and equipment
should be worn.
▲Wear clothing and equipment
appropriate for the job. Avoid
loose fitting clothing.
▲Prolonged exposure to loud noise
can cause hearing impairment or
hearing loss. Wear suitable
hearing protection such as
earmuffs or earplugs.
▲Operating equipment safely
requires the full attention of the
operator. Avoid wearing radio
headphones while operating
machinery.
Avoid High
Pressure Fluids Hazard
▲Escapingfluidunderpressure can
penetratetheskin causing serious
injury.
▲Avoid the hazard by relieving
pressure before disconnecting
hydraulic lines or performing work
on the system.
▲Make sure all hydraulic fluid
connections are tight and all
hydraulic hoses and lines are in
good condition before applying
pressure to the system.
▲Use a piece of paper or
cardboard, NOT BODY PARTS, to
check for suspected leaks.
▲Wear protective gloves and safety
glasses or goggles when working
with hydraulic systems.
▲If an accident occurs, see a
doctor immediately. Any fluid
injected into the skin must be
treated within a few hours or
gangrene may result.
These are common practices that may or may not be applicable to the products described in
this manual.

4RTR2570 Rotary Tillers 311-251M 2/16/09
Land Pride
Important Safety Information Table of Contents
Safety Labels
1. Your tiller comes equipped with all safety labels in place.
They were designed to help you safely operate your mower.
Read and follow their directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. To order new
labels go to your Land Pride dealer.
4. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request. To order new labels go to your Land Pride dealer.
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
818-171C
Rotating Tines Hazard!
818-130C
Operate only w/540rpm PTO
818-284C
Flying Debris Hazard!
KEEP FRONT DEFLECTOR IN PLACE
22236
22236
22236

5
2/16/09 RTR2570 Rotary Tillers 311-251M
Land Pride
Important Safety Information Table of Contents
818-540C
Shield missing - Do Not operate.
818-552C
Rotating Driveline Hazard - Keep Away!
22228
22228
22236
ROTATING DRIVELINE
KEEP AWAY!

6RTR2570 Rotary Tillers 311-251M 2/16/09
Land Pride
Important Safety Information Table of Contents
818-350C
General Safety Instructions
2223
6

7
2/16/09 RTR2570 Rotary Tillers 311-251M
Land Pride
Introduction Table of Contents
Introduction
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Tiller has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices
will help you get years of satisfactory use from the
machine.
Application
The Model RTR2570 Reverse-Till Rotary Tiller is
designed and built by Land Pride to till the soil for
seedbed or planting preparation. The Model RTR2570 is
adapted for 540rpm PTO and three-point hitch Category
1 mounting. The Model RTR2570 tiller is Quick-Hitch
adaptable and are compatible with 25-55hp tractors.
Reverse rotation tillers tend to achieve greater depth
penetration, moving and pulverizing more soil in the
process, while burying residue as opposed to leaving it
on top. Model RTR2570 Land Pride Rotary Tiller has
applications in landscaping, nurseries, gardens, and
medium duty commercial use. See “Features and
Benefits”,“Section 6” for additional information.
Using This Manual
•This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
LandPridedealer.Adealerhastrainedpersonnel,repair
parts and equipment needed to service the Rotary Tiller.
NOTE: A special point of information that the
operator must be aware of before continuing.
IMPORTANT: A special point of information related
to its preceding topic. Land Pride’s intention is that
this information should be read and noted before
continuing.
The parts on your Rotary Tiller have been specially
designedandshouldonlybereplacedwithgenuineLand
Pride parts. Therefore, should your Rotary Tiller require
replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
modelnumber whenordering parts fromyour LandPride
dealer.Besuretoinclude yourserialandmodelnumbers
incorrespondencealso.Refer to Figure 1forthelocation
of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
RotaryTiller.If for anyreasonyou do notunderstandany
part of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpser[email protected]
2223
6

8RTR2570 Rotary Tillers 311-251M 2/16/09
Land Pride
Section 1: Assembly and Set-up Table of Contents
Section 1: Assembly and Set-up
Tractor Requirements
This tiller is designed with a 3-point category I hitch.
Horsepower rating of tractor should not exceed 45 PTO
horsepower on all 25 series tillers.
NOTE: In order to maintain steering control, ballast
may have to be added to your tractor. To determine
whether or not to add ballast, refer to your tractor
operator’s manual.
!CAUTION
Do not over speed PTO or machine damage may result. This
reverse rotation tiller is designed to be used with a tractor
using a 540 RPM rear PTO.
Torque Requirements
Refer to “Torque Values Chart” on page 25 to determine
the correct torque value when tightening hardware
during assembly.
Hitch Assembly
Figure 1-1
22237