LandingZone LZ4012M User manual

OWNER’S MANUAL
For additional languages, please visit LandingZone.net/user-guides
12-inch MacBook Docking Station

MODEL NUMBER
LZ4012M – LandingZone Docking
Station for the 12-inch MacBook
COMPATIBILITY
This device works with the 12-inch MacBook
model A1534 (rst released in 2015).
The LandingZone requires the connection
of the MacBook USB-C Power Adapter or
another USB Type-C power adapter to charge
the MacBook and power the docking station.
The LandingZone does oer connectivity
without a power adapter connected, but the
functionality will be limited.
WHAT’S IN THE BOX?
12-inch MacBook Docking Station
Quick Start Guide
Warranty & Registration Card

The LandingZone for the 12-inch MacBook is an attractive and easy to use
docking station that allows you to instantly transform the MacBook into a desktop
workstation. The LandingZone can also help secure the MacBook with the
application of a laptop lock.
Simple Docking Process
Two USB Type-A Ports
- (one for high-speed charging)
Two USB Type-C Ports
- (one for high-speed charging)
Gigabit Ethernet Port
HDMI Port
SD & Micro SD Card Combo Slot
Two-Way Audio Port
Built-in Kensington Security Slot
- (compatible with most laptop locks)
Release Lever for Easy Undocking
Status Indicator Light
FEATURES
BENEFITS

Ethernet Driver Installation: Go to landingzone.net/download-driver to download
and install the latest Ethernet driver.
BEFORE YOU BEGIN

Connect the MacBook USB-C Power Adapter to the Type-C Power
Delivery port on the LandingZone.
Connect Ethernet & peripherals such as monitor, keyboard, mice, storage
devices, speakers, etc. (Note: the Ethernet driver must be installed before the
Ethernet port will work. You may also need to register a MAC Address for some secure
networks. Please contact your network administrator if your environment uses MAC
Address security.)
DOCKING
Step 1: Connecting Power and Peripherals
DOCKING

DOCKING
Place your closed MacBook onto the
LandingZone so that the feet of the
MacBook settle into the grooves on
the LandingZone.
Slide the MacBook to the left,
connecting the Type-C port on the
MacBook with the Type-C connector
on the LandingZone.
DOCKING
Step 2: Connecting Your MacBook

DOCKING
Slide the right wing of the LandingZone so that the pin is inserted
into the MacBook audio port.
Optional: Connect a Kensington Lock (not included) to the Kensington Lock Slot.
DOCKING
Step 2: Connecting Your MacBook

UNDOCKING
Safely eject all devices in the operating system of the MacBook
Push the release lever located on the left wing. This should
disconnect the Type-C port on the MacBook.
UNDOCKING

UNDOCKING
UNDOCKING
Slide the right wing of the
LandingZone out of the
MacBook.
Remove the MacBook from
the LandingZone.

CUSTOMER
SUPPORT
CUSTOMER SUPPORT
Online Support
Go to www.landingzone.net/FAQs
Phone Support
Call 1-888-872-3251 during normal business hours
E-mail Support
Send email to [e-mail]
Ethernet Driver Download:
Download at www.landingzone.net/download-driver

PROPER OPERATING ENVIRONMENT
Operating temperature: 50° to 95° F (10° to 35° C)
Storage temperature: -13° to 113° F (-24° to 45° C)
Relative humidity: 0% to 90% non-condensing
Maximum operating altitude: 10,000 feet
Maximum storage altitude: 15,000 feet
Maximum shipping altitude: 35,000 feet
DEVICE CARE

HELP & FAQs
TROUBLESHOOTING / FAQs
1 / 3
USB Devices Are Not Working / MacBook is Not Charging:
Make sure that both sides of the LandingZone are completely closed
and ush against the MacBook. Conrm that the MacBook USB-C Power
Adapter is properly plugged into your wall outlet and connected to the
LandingZone via the Type-C Power Delivery port.
MacBook Is Charging Slowly:
The MacBook, LandingZone, and connected devices share the power
coming from the MacBook USB-C Power Adapter. Due to the sharing of
power, the more devices there are connected to the LandingZone, the
slower the MacBook will charge.

HELP & FAQs
TROUBLESHOOTING / FAQs
2 / 3
Ethernet is not working:
The LandingZone requires an Ethernet driver be installed before the
Ethernet connection can be established. The Ethernet driver can be found
at www.landingzone.net/download-driver.
How do you Reset the LandingZone?
You can reset or power-cycle the LandingZone by undocking the MacBook,
disconnecting all connected devices and the MacBook USB-C Power
Adapter, and allowing the LandingZone to rest or a minute or two. After
resting the LandingZone, reconnect the MacBook USB-C Power Adapter,
reconnect the devices, and dock the MacBook to the LandingZone.

HELP & FAQs
TROUBLESHOOTING / FAQs
3 / 3
What devices can the LandingZone support without connecting the
MacBook USB-C Power Adapter?
Without the MacBook USB-C Power Adapter, the LandingZone can support
the connection of an SD Card, monitor, Ethernet, speakers, and low-power
USB devices (such as mice, keyboards, and ash drives).
What is the recommended Maximum Load the LandingZone can support?
When the MacBook USB-C Power Adapter is connected, the LandingZone
should be able to connect an SD card, monitor, Ethernet, speakers, two low-
power USB devices, and two high-power USD devices (such as hard drives)
without issue. If more high-power devices are connected, the MacBook
USB-C Power Adapter may not provide enough power to fully power them.

CARE & CLEANING
Clean with a soft cloth. Do not use water or cleaning solutions to clean
the LandingZone.
DISPOSAL
Applicable laws may limit how you can dispose of this product.
Accordingly, please make sure you follow your local, state, federal, and
country ordinances, laws, regulations, and other guidelines to properly
dispose of this product and the accompanying packaging materials.
DEVICE CARE

COPYRIGHT & TRADEMARK INFORMATION
© 2016 inniWing, Inc. Designed in San Jose, CA & manufactured in China.
Protected under US and foreign patents.
LandingZone is a trademark of inniWing, Inc. Apple, the Apple logo,
MacBook, macOS are trademarks of Apple, Inc., registered in the US
and other countries. Kensington is a registered trademark of Kensington
Computer Group, a division of ACCO Brands. HDMI and High-Denition
Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC. All other company and product names mentioned may be
trademarks of their respective companies. Mention of third-party products
is for informational purposes only and does not constitute an endorsement
or recommendation. inniWing, Inc. assumes no responsibility with regard
to the performance of products mentioned.
COPYRIGHT