Landmann 28305 User manual

NORTHWOODS OUTDOOR FIREPLACE
Model 28305
ASSEMBLY INSTRUCTIONS
®
Model 28305
FOR SAFE OPERATION, PLEASE READ ALL ASSEMBLY
AND OPERATING INSTRUCTIONS BEFORE USE.
Congratulations on your purchase of the Northwoods
Outdoor Fireplace! At Landmann U A, our goal is to
provide products that are easy to assemble and fun to
use. hould you have questions, issues, a defective
part or if you have any questions concerning its use,
please contact us at:
[email protected]
-OR-
1-800-321-3473 M-F 8-5 Eastern Time
Proof of purchase may be required.
Landmann U A
Cartersville, GA 30120
www.landmann-usa.com
Made in China
© 2007 Landmann U A
• A LAYER OF AND, 1” TO 1 1/2” THICK MU T
BE ADDED TO THE BOTTOM OF THE FIRE
BOWL TO HELP PROTECT AGAIN T THE
CORRO IVE NATURE OF THE A HE .
• THI OUTDOOR FIREPLACE I FOR
OUTDOOR U E ONLY!
• U E ONLY ON BRICK, CONCRETE, TONE
OR OTHER MA ONRY URFACE .
• DO NOT U E ON LAWN OR WOODEN
DECK .
• KEEP THE OUTDOOR FIREPLACE AWAY
FROM BUILDING , FLAMMABLE ITEM
AND VEHICLE .
• THE OUTDOOR FIREPLACE I FOR ADULT
U E ONLY.
• DO NOT MOVE THE OUTDOOR FIRE
PLACE WHILE IT I BEING U ED.
• DO NOT LEAVE UNATTENDED AT ANY
TIME WHILE IN U E.
• DO NOT U E IN WINDY CONDITION .
• DO NOT OVERLOAD OR U E TO BURN
LEAVE OR GARBAGE.
• KEEP THE PARK CREEN IN PLACE
WHILE U ING.
• U E CAUTION WHEN REMOVING THE
COVER, A HOT TEAM OR A FLARE UP
COULD CAU E BURN .
• BEFORE EACH U E, MAKE URE THE
OUTDOOR FIREPLACE I IN GOOD
WORKING CONDITION.
• U E CAUTION AFTER THE FIRE HA
BEEN EXTINGUI HED- URFACE WILL
REMAIN HOT FOR OME TIME.
• BE URE ALL COAL ARE COLD BEFORE
EMPTYING. IF NECE ARY POUR WATER
ON COAL .
READ FIRST!
RULES FOR SAFE OPERATION
PAGE 1
REV. 4, 6/19/07
!
!

Assembly Instructions:
You will need these tools for assembly:
Medium phillips or flathead screw driver, pliers or small adjustable
wrench.
Step 1 Unpack all parts from the carton.
Step 2 Align leg (A) holes with holes in fire bowl (B) (Figure 1).
Insert four M6 x 30 bolts and secure with M6 nuts.
Tighten nuts with wrench (Figure 2).
Step 3 Attach front and back ring sections (C) to fire bowl
using four M6 x 12 bolts and secure with M6 nuts.
Tighten nuts with wrench (Figure 3).
Step 4 Attach side ring sections (CC) using four M6 x 12 bolts
and secure with M6 nuts. Tighten nuts with wrench
(Figure 4).
Step 5 Attach two side screen panels (J) to back screen panel
(G) using four M6 x 12 bolts and secure with M6 nuts.
Tighten nuts with wrench (Figure 5).
Step 6 Align holes of flat bar (D) to side screens and attach with
two M6 x 12 bolts and secure with M6 nuts. (Figure 6).
Step 7 Attach top screen / front screen panel (F) to screen
assembly using four M6 x 12 bolts and secure with M6
nuts (Figure 7).
Step 8 Make sure all bolts are securely tightened.
Step 9 Place screen assembly on fire bowl.
Step 10 Enjoy!
Maintenance:
The orthwoods Outdoor Fireplace may be cleaned with water and
mild detergent. Periodic maintenance is required to return painted
steel surfaces to original appearance. Remove any rust with
sandpaper or steel brush. Repaint with grill paint for high
temperature surfaces. Follow paint manufacturerʼs instructions.
Parts and Quantities:
PAGE 2
NORTHWOODS OUTDOOR FIREPLACE
Model 28305
®
If you have any uestions or need
assistance, please contact us at:
1-800-321-3473 or at
[email protected]
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5 Figure 6
Figure 7
Figure 9
EFGJ
J
D
B
A
C
CC
PART DESCRIPTIO QTY
A
B
C
CC
D
E
F
G
J
K
L
M
LEGS
FIRE BOWL
FRO T, BACK RI G SECTIO S
SIDE RI G SECTIO S
FLAT BAR
COOKI G GRATE
TOP SCREE / FRO T SCREE PA EL
BACK SCREE PA EL
SIDE SCREE PA ELS
M6 x 30 BOLT
M6 x 12 BOLT
M6 UT
2
1
2
2
1
1
1
1
2
4
18
22