Laney GS212IE User manual

GS212IE
OPERATING INSTRUCTIONS - 1
LA N E Y A M P L I F I C A T I O N
w w w. l a n e y. c o. u k GS212IE

Laney
Dear Player,
Thank you very much for purchasing your new Laney product and becoming part of the worldwide Laney family. Each and every Laney unit
is designed and built with the utmost attention to care and detail, so I trust yours will give you many years of enjoyment.
Laney products have a heritage which stretches back to 1967 when I first began building valve amplifiers in my parent’s garage. Since then
we have moved on from strength to strength developing an extensive range of guitar, bass, public address and keyboard amplification
products along with a list of Laney endorsees that includes some of the world’s most famous and respected musicians. At the same time
we believe we have not lost sight of the reason Laney was founded in the first place - a dedication to building great sounding amplification
for working musicians.
Warm Regards,
Lyndon Laney CEO
Page 2/8
GS212IE
INTRODUCTION
The GS212IE is a 2 x 12” cabinet rated at 160 watts (8 ohms) and can be used in isolation or combined with other Laney enclosures.
Construction features a robust plywood cabinet, with large top mounted 90 degree side bar handles, castor cups, switchable impedance and
a choice of Mono or Stereo modes.
Every Laney product is extensively play tested by experienced guitarists to ensure it has the tone and durability to perform at the very
highest level, before being shipped to our customers.
Your GS212IE should give you years of trouble-free service, however please take time to read this manual, as it will allow you to get the
best from your extension cabinet. We hope you enjoy using your GS212IE as much as we enjoyed designing and making it.
Best wishes from all at Laney.

Page 3/8
www.laney.co.uk
Laney
DESIGNED AND ENGINEERED
IN THE UK BY LANEY
SERIAL NUMBER:
4 OHMS
8 OHMS
MONO
STEREO
POWER RATING:
MONO = 160W RMS
STEREO = 2*80W RMS
16 OHMS
8 OHMS
MODEL = GS212IE
INPUT A INPUT B
GS 2IE21
Laney
Always use good quality speaker cables
INPUT IMPEDANCE M/S SWITCH OPERATES
A 4 Ohms Mono All Speakers
B 16 Ohms Mono All Speakers
A 8 Ohms Stereo RH Half of Cab
B 8 Ohms Stereo LH Half of Cab
SPECIFICATIONS GS212IE
Impedance Switchable Impedance
Loudspeaker 2 x 12" Celestion 70/Eighty
Power Rating Mono 160W RMS Stereo 2*80W RMS
Size W*D*H 715*358*455
Weight 20 Kg

Laney
GS212IE
SAMPLE SYSTEMS
Connect to the
16 Ohm Mono
socket.
www.laney.co.uk
Laney
Power To The Music
MAXIMUM POWER CONSUMPTION
100 WATTS 50/60Hz
T500mA L 250V
T500mA L 250V
~100V
~120V
T250mA L 250V
T250mA L 250V
~230V
~240V
SUPPLY VOLTAGE &
FUSE RATING
HT FUSE
T100mA L 250V
CAUTION TO REDUCE THE RISK OF FIRE
REPLACE WITH SAME TYPE AND RATING
SERIAL NO:
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONEL.
MADE IN THE U.K.
IMPEDANCE
8-16 OHMS
EFFECTS LOOP
(INSERT)
FX SEND/LINE OUT FX RETURN EXTERNAL SPEAKER
BYPASS
0dBu
-10dBu
MODEL LC15-110
FOOTSWITCH
www.laney.co.uk
Laney
DESIGNED AND ENGINEERED
IN THE UK BY LANEY
SERIAL NUMBER:
4 OHMS
8 OHMS
MONO
STEREO
MADE IN CHINA
POWER RATING:
MONO = 160W RMS
STEREO = 2*80W RMS
16 OHMS
8 OHMS
MODEL = GS212IE
INPUT A INPUT B
System using
1* LC15-110
1* GS212IE
www.laney.co.uk
Laney
DESIGNED AND ENGINEERED
IN THE UK BY LANEY
SERIAL NUMBER:
4 OHMS
8 OHMS
MONO
STEREO
MADE IN CHINA
POWER RATING:
MONO = 160W RMS
STEREO = 2*80W RMS
16 OHMS
8 OHMS
MODEL = GS212IE
INPUT A INPUT B
Picture www.laney.co.uk
Laney
Power To The Music
MAXIMUM POWER CONSUMPTION
100 WATTS 50/60Hz
T5A L 250V
T5A L 250V
~100V
~120V
T2A L 250V
T2A L 250V
~230V
~240V
SUPPLY VOLTAGE &
FUSE RATING HT FUSE
T500mA L
250V
CAUTION TO REDUCE THE RISK
OF FIRE REPLACE WITH SAME
TYPE AND RATING
SERIAL NO:
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONEL.
MADE IN THE U.K.
8 OHM
4 OHM
INTERNAL
CABINET EXTENSION
CABINET
EFFECTS LOOP
(INSERT) REVERB
FX SEND/LINE OUT FX RETURN FOOTSWITCH
DRIVE
RING
TIP LOUDSPEAKERS
BYPASS
0dBu
-10dBu
MODEL LC50-112
Input
Output
FX Controller Connect to the Extension Cab.
socket, if also using the internal
speaker set impedance
switch to 4 Ohms.
Connect to the
16 Ohm Mono
socket.
System using
1* LC50-112
1* GS212IE
& FX Controller
Page 4/8

Page 5/8
GS 2IE21
Laney
SAMPLE SYSTEMS
Input FX Controller
Output
LH
Output
RH
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
SUPPLY VOLTAGE
HT FUSE
CAUTION
TO REDUCE THE RISK OF FIRE REPLACE
ONLY WITH SAME TYPE AND RATING
MODEL : GH50L
SERIAL NO.
1*16 OHM
MAXIMUM POWER CONSUMPTION
300 WATTS
CAUTION - TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER. NO USER SERVICABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONEL.
WARNING - THIS APPARATUS MUST
BE EARTHED
WARNING - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
ATTENTION REMPLACER LE FUSIBLE
PR LE MEME ET CALIBRE
ATTENTION DEBRACHER A LA PRISE
SECTEUR AVANT D’OUVRIR
Laney N164 6N164 6
T1A L
MAINS FUSE
~220-240V = T2A L
~100-120V = T5A L
1*8 OHM 1*4 OHM
2*16 OHM 2*8 OHM
LOUDSPEAKERS
WARNING:
USE ONLY ONE IMPEDANCE
SELECTION AT A TIME
5881/6L6 EL34
FOOTSWITCH
BYPASS
SIDE/
CHAIN INSERT
SEND RETURN
5
4
3
2
1
010
9
8
7
6
FX RETURN
LEVEL
SLAVE IN SLAVE OUT BIAS
Made in the UK
www.laney.co.uk
SLAVE
POWE R TO T HE M US IC
1*8 OHM
2*16 OHM
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
SUPPLY VOLTAGE
HT FUSE
CAUTION
TO REDUCE THE RISK OF FIRE REPLACE
ONLY WITH SAME TYPE AND RATING
MODEL : GH50L
SERIAL NO.
1*16 OHM
MAXIMUM POWER CONSUMPTION
300 WATTS
CAUTION - TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER. NO USER SERVICABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONEL.
WARNING - THIS APPARATUS MUST
BE EARTHED
WARNING - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
ATTENTION REMPLACER LE FUSIBLE
PR LE MEME ET CALIBRE
ATTENTION DEBRACHER A LA PRISE
SECTEUR AVANT D’OUVRIR
Laney N164 6N164 6
T1A L
MAINS FUSE
~220-240V = T2A L
~100-120V = T5A L
1*8 OHM 1*4 OHM
2*16 OHM 2*8 OHM
LOUDSPEAKERS
WARNING:
USE ONLY ONE IMPEDANCE
SELECTION AT A TIME
5881/6L6 EL34
FOOTSWITCH
BYPASS
SIDE/
CHAIN INSERT
SEND RETURN
5
4
3
2
1
010
9
8
7
6
FX RETURN
LEVEL
SLAVE IN SLAVE OUT BIAS
Made in the UK
www.laney.co.uk
SLAVE
POWE R TO T HE M US IC
1*8 OHM
2*16 OHM
Connected to the two
single 8 ohm sockets.
www.laney.co.uk
Laney
DESIGNED AND ENGINEERED
IN THE UK BY LANEY
SERIAL NUMBER:
4 OHMS
8 OHMS
MONO
STEREO
MADE IN CHINA
POWER RATING:
MONO = 160W RMS
STEREO = 2*80W RMS
16 OHMS
8 OHMS
MODEL = GS212IE
INPUT A INPUT B
Stereo system using
2* GH50L Heads
1* GS212IE
& FX Controller

Laney
GS212IE
SAMPLE SYSTEMS
Page 6/8
1*8 OHM
2*16 OHM
www.laney.co.uk
Laney
DESIGNED AND ENGINEERED
IN THE UK BY LANEY
SERIAL NUMBER:
4 OHMS
8 OHMS
MONO
STEREO
MADE IN CHINA
POWER RATING:
MONO = 160W RMS
STEREO = 2*80W RMS
16 OHMS
8 OHMS
MODEL = GS212IE
INPUT A INPUT B
16 Ohms
Link
Input
Designed in the UK by Laney
Made in China
Connect to the
single 8 ohm socket.
Connect to the
16 ohm Mono
socket.
System using
1* VH100R Head
1* GS212IE
1* GS412IA
& FX Controller
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
SUPPLY VOLTAGE
HT FUSE
CAUTION
TO REDUCE THE RISK OF FIRE REPLACE
ONLY WITH SAME TYPE AND RATING
MODEL
SERIAL NO.
1*16 OHM
MAXIMUM POWER CONSUMPTION
300 WATTS
WARNING - THIS APPARATUS MUST BE EARTHED
WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONEL.
ATTENTION REMPLACER LE FUSIBLE PR LE MEME
ET CALIBRE
ATTENTION DEBRACHER A LA PRISE SECTEUR AVANT D’OUVRIR
MADE IN THE U.K.
www.laney.co.uk
Laney
Power To The Music
T1A L
MAINS FUSE
~220-240V = T2A L 250V
~100-120V = T5A L 250V
1*8 OHM 1*4 OHM
2*16 OHM 2*8 OHM
LOUDSPEAKERS
WARNING:
USE ONLY ONE IMPEDANCE
SELECTION AT A TIME
CLASS 2 WIRING MAY BE USED
INOUT LINE
PREAMP POWERAMP
FOOTSWITCH EL34 6L6/
5881
BIAS
ONLY FOR USE
WITH LANEY FS4
INSERT RETURN
LEVEL
RETURNSEND
BYPASS SIDE/
CHAIN
INSERT
SENDRETURNRETURNRETURN
EFFECTS LOOPEFFECTS LOOP
OVERDRIVE CHANNEL BCLEAN CHANNEL A
A+B
SEND 0 10
Input FX Controller
Output

Page 7/8
GS 2IE21
Laney
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (93/68/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal
household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the WEEE
(Waste Electrical and Electronic Equipment) directive applicable in your country.
IMPORTANT SAFETY INSTRUCTIONS
Duration Per Day
In Hours
8
6
4
3
2
1 ½
1
½
Sound Level dBA,
slow response
90
92
95
97
100
102
105
110
1). Read & Retain these Instructions carefully before installing or operating this product.
2). Comply with Warnings: All warnings and instructions for these products should be adhered to.
3). Unpacking: On unpacking your product please check carefully for any signs of damage that may have occured whilst in transit from the Laney factory to your dealer. In the unlikely
event that there has been damage, please repack your unit in it original carton and consult your dealer. We strongly advise you to keep your original transit carton, since in the unlikly
event that your unit should develop a fault, you will be able to return it to you dealer for rectification securely packed.
4). Amplifier Connection: In order to avoid damage , it is advisable to establish and follow a pattern for turning on and off your system. With all system parts connected, turn on
source equipment, tape decks, cd players, mixers, effects processors etc, BEFORE turing on your guitar amplifier. Many products have large transient surges at turn on and off which can
cause damage to your speakers.
By turning on your guitar amplifier LAST and making sure its level control is set to a minimum, any transients from other equipment should not reach your loud speakers. Wait till all
system parts have stabillised, usually a couple of seconds. Similarly when turning off your system always turn down the level controls on your guitar amplifier and then turn off its power
before turning off other equipment
5). Cables: Never use shielded or microphone cable for any speaker connections as this will not be stubstantial enough to handle the amplifier load and could cause damage to your
complete system.
6). Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid excessive levels that
can cause permament hearing damage.
7). Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in
susceptibility to noise induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently
intense noise for a sufficient time. The U.S. Government's Occupational Safety and Health Administration (OSHA)
has specified the permissible noise level exposure in the chart oposite.
According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear
plugs or protectors in the ear canals or over the ears must be worn when operating this amplification system in
order to prevent a permanent hearing loss if exposure exceeds the limits set forth oposite. To ensure against
potentially dangerous exposure to high sound pressure levels it is recommended that all persons exposed to
equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing
protectors while this unit is in operation.
8). Servicing: The user should not attempt to service these products. Refer all servicing to qualified service
personnel

In the interest of continued product development, Laney reserves the right to amend product specification without prior notification.
POWER TO THE MUSIC
Laney
LA N E Y A M P L I F I C A T I O N
w w w. l a n e y. c o. u k