Laney Ironheart IRT212 User manual

IRT412A

4

The Ironheart IRT212,IRT412 & IRT412A are a series of cabinets optimised for use with
IRT120H,IRT60H,IRT60-212 - or indeed any amplifier in the Laney range.
The IRT212 is a 2 x 12” cabinet rated at 160 watts (8 ohms) and can be used in isolation
or combined with other Laney enclosures.Construction features a robust plywood
cabinet, with large top mounted 90 degree bar handles for ease of portability,textured
black fret material,steel corner protection and top mounted castor cups.
Rated at 320 watts (16 ohms) the IRT412 can be used singularly or as paired with an
IRT412A to form an 8 x 12 stack.In addition to the similar design & construction of its
smaller brother,both of the 412's also have a set of robust steel castors to make life easier
on the road.
All the cabinets have similar appearance,all have a great sound,choose whichever combination is best for your rig.
Every Laney product is extensively play tested by
experienced guitarists to ensure it has the tone and
durability to perform at the very highest level,before
being shipped to our customers.
We hope you enjoy using your new extension cabinet
as much as we enjoyed designing and making it.It
should give you years of trouble-free service,however
please take time to read this manual,as it will allow
you to get the best from your Ironheart Cabinet.
Best wishes from all at Laney.
IRT412AIRT412
IRT212

In order to take full advantage of your new product and enjoy long and trouble-free performance,please read this owner's manual
carefully,and keep it in a safe place for future reference.
1).Unpacking:On unpacking your product please check carefully for any signs of damage that may have occurred whilst in transit
from the Laney factory to your dealer.In the unlikely event that there has been damage,please repack your unit in its original carton
and consult your dealer.We strongly advise you to keep your original transit carton,since in the unlikely event that your unit should
develop a fault,you will be able to return it to you dealer for rectification securely packed.
2).Amplifier Connection: In order to avoid damage ,it is advisable to establish and follow a pattern for turning on and off your
system.With all system parts connected,turn on source equipment,tape decks,cd players,mixers,effects processors etc,BEFORE
turning on your guitar amplifier.Many products have large transient surges at turn on and off which can cause damage to your
speakers.
By turning on your guitar amplifier LAST and making sure its level control is set to a minimum,any transients from other equipment
should not reach your loud speakers.Wait till all system parts have stabilised,usually a couple of seconds.Similarly when turning off
your system always turn down the level controls on your guitar amplifier and then turn off its power before turning off other
equipment
3).Cables: Never use shielded or microphone cable for any speaker connections as this will not be substantial enough to handle
the amplifier load and could cause damage to your complete system.
4).Servicing:The user should not attempt to service these products.Refer all servicing to qualified service personnel
6

IRT212 IRT412/A
Weight 19Kg 30Kg
Impedance 8 Ohms 16 Ohms
Drivers 2 x 12" Custom Designed Driver
Overall
Dimensions W 715 x H 483 x D 358 W 715 x H 728 (over feet) 778 (over castor) x D 358
Cabinet
Design Rugged plywood construction, black metal corners, black textured fret
material, castor cups, comfortable top
edge bar handles and rubber feet
Rugged plywood construction, black
metal corners, black textured fret
material, castor cups, comfortable
side bar handles, metal castors and
rubber feet. Choice of angled or
straight design.
4x12" Custom Designed Drivers
Power RMS 160 Watts 320 Watts
Inputs 2 x 6.3 Jack sockets 2 x6.3 Jack sockets
UNPACKING INSTRUCTIONS (IRT412/A)
1. Open the top of the carton, remove the top foam tray, side
protectors and open the protective bag, pull back to sides.
2. Flip the carton over. Cabinet now rests on its castors.
3. Remove the carton, bottom foam tray and protective bag.
4. Enjoy.
IRT412 & IRT412A rear panels are similar 7

OPERATING INSTRUCTIONS Issue 1.1