Lange Originals HOIST-A-TOP JL CRANK User manual

HOIST-A-TOP® JL CRANK
Call toll free 1866 284 7428
langeoriginals.com copyright
lange originals 2017

™
Crank
®
®
Comprehensive Video Guide Instructions Available
Thank you for choosing the Lange Originals® Hoist A Top® Crank style. We have
added a comprehensive video instructions. This video is available streaming on
youtube at the following QR code or hyper-link. To use it on your smart-phone just
scan the QR code with your favorite scanner (available on Google play or IOS
markets). To use on a Computer type the web address URL into your browser bar:
https://youtu.be/orz0M1kAo_8
This video is broken up into sections for easy navigation and is a step by step
guide on installation of this product.
VIDEO STREAMING LINKS
https://youtu.be/orz0M1kAo_8

Safety Requirements
Please Read!
Please thoroughly read and understand these instructions before installing
your Hoist-A-Top® and before lifting your top.
When installing the Hoist-A-Top® remember safety first! Make sure you use
proper safety equipment when installing this product. Use gloves and eye
protection. Be careful on ladders. If you are unsure about installing this
product consult a professional or call us at the factory.
Cautions:
•Make sure your garage or structure is capable of supporting the weight
of your top. If there is any question about your structure’s integrity,
consult a professional.
•Before lifting your top make sure that all hardware is properly fastened
to the center of your studs in your wall and ceiling. Wire clamps must
be checked and tightened regularly.
•Do a dead weight lift to initially test your installation.
•Upon lifting your top for the first time and subsequent times thereafter
visually and check that all hardware including but not limited to wire
clamps , elevator bolts, hooks , wire cable, crank hoist, and lifting strap.
Make sure all are tight and in good working order.
•Lange Originals is not responsible for damage or personal injury due to
improper installation, custom installation that doesn't follow the
instructions, or neglect to inspect equipment prior to using equipment.
If you need help for any reason DO NOT CALL YOUR DEALER Please contact
us direct at the factory. We can help with missing parts or for help with
installation.
Call toll free 1-866-284-7428 or email at [e-mail]
Call toll free 1866 284 7428
langeoriginals.com copyright
lange originals 2017

Part Numb er Description Qty
3
4
2
1
1
1
2
HAT-101
HAT-100
HAT-018
HAT-003
HAT-127
HAT-134
HAT-135
HAT-019
Blade
Support Arms
“T” Sec tion with Lifting
Black Foam Holes
“J” Hooks
JL Rear Hook
Foam Square Support
Long Foam Arms (2 pcs)
Bungee Cord
Hardware Parts Bag-023
3
3
13
HAC-028
HAC-015
HAT-050
HAT-125
HAC-043
HAC-023
HAT-110
Small Plastic End Caps
Nylon Insert Lock Nut
3/8 Wing Nut
Zinc Plated 3.5“ Screws
1.5" Wood Screws
Wire Rope Clamps
3" Lag Screws
3/8 Flat Washer
Grommet Strap
Wire Thimbles
HDW-031
Crank Unit & Mounting Components
HAC-010
HAT-116
HAT-118
Crank Unit
Single Flush Mount Pulley
Double Flush Mount Pulley
Parts List
Parts are listed by part number, description, and
quantity. The part number may be referenced in the
instructions designated by parenthesis () for your
convenience. Parts are updated periodically and may
vary in color or shape.
014-920 Hoist-A-Top Crank for JL Jeeps
Frame
1
HDW-015 1
2
1
2
1
13
6
2
2
2
HDW-054
HAC-043
HAC-023
HAT-125
HDW-031
HAC-028
HAT-110
HAT-116
HAT-050
HAT-101
HAT-100
HAC-015
HAT-018
HAT-003
HAT-134
HDW-054
HAT-019
HAT-135
HAT-127
HDW-015
HAT-118
HAC-010
HOIST
A
TOP
®
PLEASE READ ALL INSTRUCTION BEFORE INSTALLATION

Installation of the
crank unit
1. Remove the spool from
the crank unit using the
11/16 and 9/16 socket
2. Cut one section of 2x6
to 20 inches. Mount it
to your wall using at
least 4 screws (at least
two in each stud)
aprox. 50-inches above
the floor.
3. Mount your crank unit
to the center of the 2x6
using the 2 3-inch lag
screws and washers
provided.
Call toll free 1866 284 7428
langeoriginals.com copyright
lange originals 2017