Laser ALC-KCUTE User manual

User Manual
Alarm Clock with Night Light
ALC-KCUTE

SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

WHAT’S IN THE BOX
• Alarm Clock with Night Light
• Ear Attachment
• Charging Cable
• User Manual

Temperature Range:
Time Format:
-20°C – 50°C or
-4°F – 122°F
12 & 24HR
Charging Input: DC 3.5V
Charging Time:
Standby Time:
3 hours
Battery: 3.7V, 1200mAh
9 – 200 hours
(dependant on
LED light use)
Dimensions: 79 x 66 x 82mm
Weight: 150g
SPECIFICATIONS

CONTROLS
Caution: For accurate temperature
readings please do not obstruct the
sensor.
input
Up
Down
4 8
3
2
1
5 7
6

CONTROLS
Continued...
Tap to turn light on/off.
Double tap when light is
off to enter countdown
timer mode.
Double tap when light is
on to check light timer
progress bar.
After alarm rings tap
to snooze.
-
-
-
-
1.
Light/
Snooze
Used to take temperature
readings.
Used for speaker output.
-
-
-
2.
Speaker
/Temp
Sensor
Insert a small object to
reset the clock to factory
settings.
3.
Reset

CONTROLS
Continued...
Tap to display the date.
The date will be displayed
for a few seconds before
switching back to
time display.
Press and hold to enter
time setting mode.
-
-
-
-
-
-
4.
Time
Setting
Tap to display the four
alarm groups.
Double tap to turn the
alarm on/off.
Press and hold to enter
alarm setting mode.
Plug the included
charging cable to
recharge the device.
5.
Alarm
Setting
6.
DC 3.5V
Charging
Input

CONTROLS
Continued...
Tap to increase value
when setting time, alarm,
and light timing.
-
-
7.
Up
Tap to decrease value
when setting time, alarm,
and light timing.
8.
Down

DISPLAY
CHARGING
Light time progress bar Day display zone

OPERATING
INSTRUCTIONS
• Ensure the unit is powered on and
in normal display mode.
Setting Time & Date
• Press and hold the “Time Setting”
button to enter time setting mode.
• Press the “Up” or “Down” button
to switch between 12/24HR time.
• Tap the “Time Setting” button to
confirm the value and move to the
next field.
• Adjust the values by pressing the
“Up” or “Down” button.
• The field sequence is as follows:
Hour > Minute > Year > Month >
Date > Temperature Unit.