Laser KIDS ALC-KROBOT User manual

User Manual
Robot Alarm Clock
ALC-KROBOT

SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

WHAT’S IN THE BOX
• Robot Alarm Clock
• User Manual

Time Format: 12 & 24HR
Screen Size: 50mm
Battery: 1.5V, 2 x AAA
(not included)
Dimensions: 108 x 43 x 160mm
Weight: 285g
SPECIFICATIONS

PRODUCT DIAGRAM
2
1
3
4
5
1. Alarm lights
2. Heartbeat
4. Temperature
5. Alarm time
3. Time

PRODUCT DIAGRAM
continued...
6. Temperature
setting button
7. Time setting button
8. Alarm setting button
9. Down button
10. Up button
6 10
7 8 9

PRODUCT DIAGRAM
Lights will flash when
alarm is sounding.
-
1. Alarm lights
No function
(aesthetic only)
-
-
-
2. Heartbeat
Time display3. Time
Temperature display4. Temperature
-Tap to decrease value.9. Down button
-Tap to increase value.10. Up button
-Alarm display
-Tap to switch between
Celsius and Fahrenheit
5. Alarm time
-
-
Tap to turn alarm on/off.
Press and hold to enter
alarm setting mode.
8. Alarm setting
button
-
-
-
Tap to switch between
12 and 24HR time.
Press and hold to enter
time setting mode.
In time setting mode tap
to switch between fields.
7. Time setting
button
6. Temperature
setting button
continued...

1. Open the battery compartment.
2. Insert 2 x AAA batteries.
3. When inserted correctly the device will
power on and you will hear a tone.
GETTING STARTED

OPERATING
INSTRUCTIONS
• Press and hold the “Time setting” button
• Adjust the values by pressing the “Up”
or “Down” button.
Setting Time & Date
• Tap the “Time setting” button to move to
the next field.
• The field order is as follows Hour > Minute.
• To finish tap the “Time setting” button or
don’t press anything for approx. 30 seconds.

OPERATING
INSTRUCTIONS
• Press and hold the “Alarm setting” button
• Adjust the values by pressing the “Up” or
“Down” button.
Setting the Alarm
• Tap the “Alarm setting” button to move
to the next field.
• The field order is as follows Hour > Minute
> Alarm Sound.
• There are 5 alarm sounds to choose from.
• To finish tap the “Alarm setting” button or
don’t press anything for approx. 30 seconds.
continued...

1. When the alarm sounds, shake the
Robot to snooze.
2. The snooze function will turn off after
3 times.
3. To turn the alarm or snooze off, press
any of the buttons on the back of
the Robot.
OPERATING
INSTRUCTIONS
continued...

TROUBLESHOOTING
• Check batteries and replace as required.
No Power:
• When the alarm sounds, shaking the Robot
will only put it into snooze mode. Snooze can
be used up to 3 times then the alarm will
turn off.
• To turn the alarm or snooze off, press any
of the buttons on the back of the Robot.
The Alarm keeps sounding:

www.laserco.com.au
Check us out at
www.youtube.com/lasercoau
Visit our website