LaserPegs FACTOID MPS 100 User manual

1. Remove screws.
2. Place three LR 44 batteries in the correct
position - as displayed inside the Mobile Power Source.
3. Push Power Switch to turn on!
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium) batteries!
6. Exhausted batteries are to be removed
from the power base.
7. Never connect more than 4 Laser Pegs®
8. Non-rechargeable batteries are not to be recharged.
9. Rechargeable batteries are only to be charged under
adult supervision.
10. Rechargeable batteries are to be removed from the
toy before being charged.
11. Batteries are to be inserted with the correct polarity.
12. The supply terminals are not to be short-circuited.
WARNING! Each Laser Peg® draws current from the batteries. Therefore,
the more pegs you use, the quicker you will deplete your battery power! As
the power weakens, the current will slowly fail and some Laser Pegs® will
illuminate (typically the reds and yellows) and some won’t. When the Laser
Pegs® dim the Laser Pegs® are not broken, they just need stronger batteries.
You have 3 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still
deplete rapidly the more Laser Pegs® you connect!
Press button to
turn on/o/ash
Push button to cycle
through dierent
light settings.
Power Switch
Power
Switch
Peg Holes
Battery
section
Remove the three Philips
head screws with a 4mm
screw driver.
*To avoid short-circuits, keep metal objects and other
un-authorized materials from obstructing the peg holes.
When Using Batteries
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and o smoothly.
Connecting Pegs
Requires
3 LR 44 Button Cell
Batteries
Push switch to
ON/OFF/FLASH
MPS 100
For Boys And Girls
Ages 5 And Up
LIGHTED
CONSTRUCTION SET INCLUDES:
• 2 Laser Pegs®
• 37 Construction Parts
• Mobile Power Source
• Instruction Manual
Batteries
Included
www.LaserPegs.com
Laser Pegs® Parts List
Please read this manual before
you begin! Failure to follow this
manual’s instructions may result in
damage to the Mobile Power Source
and/or Laser Pegs®. Not adhering
to these instructions will void
the manufacturer’s warranty. The
packaging must be kept because it
contains important information.
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL. 34240. Contact: [email protected]
Laser Pegs®link that allows you to
connect to other construction kits.
Laser Pegs
®
Stackable
EN71, RoHS COMPLIANT
x2
This product complies to all safety
requirements of ASTM F 963
STACKABLE
Construction Parts List
x2 x2
x1 x1
x2
x2
x4
MODEL INSTRUCTIONS
All additional model instructions can be
downloaded at www.LaserPegs.com
4 Models+
Any creation you can build
x1
x2
x2
x2
x4
x2
x2
x2
x3
x2
x2
AIRCRAFT
WARNING! Each Laser Peg® draws current from the batteries. Therefore,
the more pegs you use, the quicker you will deplete your battery power! As
the power weakens, the current will slowly fail and some Laser Pegs® will
illuminate (typically the reds and yellows) and some won’t. When the Laser
Pegs® dim, the Laser Pegs® are not broken, they just need stronger batteries.
You have 3 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still
deplete rapidly the more Laser Pegs® you connect!
Slide Power Switch
to turn on/o/ash
Slide Power Switch to cycle
through dierent
light settings.
*To avoid short-circuits, keep metal objects and other
unauthorized materials from obstructing the peg holes.
Power Switch
Peg Holes
Battery
Compartment
Remove Pull
Tab To Activate
Batteries
To construct with Laser Pegs®, slide two
pieces together to form a connection.
Slide each piece on and o smoothly.
Connecting Pegs
Construction Compatible
Remove the Phillips head
screw with a 4mm screw
driver.
1. Remove the Phillips head screw.
2. Remove the Battery Compartment Cover.
3. Place three LR 44 batteries in the correct position.
(Batteries are to be inserted with the correct polarity).
4. Replace the Battery Compartment Cover.
5. Replace the Phillips head screw.
6. Slide Power Switch to turn on!
7. Do not mix old and new batteries.
8. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium, NiMH) batteries!
9. Exhausted batteries are to be removed from the power
base.
10. Never connect more than 4 Laser Pegs®
11. Non-rechargeable batteries are not to be recharged.
12. Rechargeable batteries are only to be recharged under
adult supervision.
13. Rechargeable batteries are to be removed from the toy
before being recharged.
14. The supply terminals are not to be short-circuited.
15. DO NOT THROW BATTERIES INTO FIRE!
Requires
3 LR 44 Button Cell
Batteries
Batteries
Mobile Power Source
Battery
Compartment Cover
Screw
LR 44
Button Cell
Battery x3
Replacing Batteries
Please dispose of batteries properly as per state and local regulations.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.
Do not submerge in water.
WARNING: STROBE LIGHTS
MAY CAUSE SEIZURES
Warning: This product contains a
button battery. If swallowed, it could cause
severe injury or death in just 2 hours. Seek
medical attention immediately.”
Model
Diculty
Level
LIGHT JET
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
8
STEP
9
STEP
10
STEP
11
STEP
12
STEP
13
STEP
A
A
COMBINE
LIGHT JET: A speedy little airplane powered by high performance
jet engines.

Copyright 2013 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
MODEL INSTRUCTIONS
All additional model instructions can be
downloaded at www.LaserPegs.com
18
STEP
19
STEP
14
STEP
20
STEP
21
STEP
27
STEP
28
STEP
22
STEP
29
STEP
30
STEP
23
STEP
31
STEP
24
STEP
25
STEP
26
STEP
16
STEP
15
STEP
17
STEP
CARGO
TRANSPORT
LIGHT JET
LIGHT GLIDER
LIGHT BOMBER
Copyright 2013 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
Environmental Phenomena
* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to normal operation when the interference stops. If
not, it may become necessary to turn the power o and back on, or remove and reinstall the batteries. * In the unlikely event of an electrostatic
discharge, the unit may malfunction and lose memory, requiring the user to reset the devise by removing and reinstalling the batteries.
Laser Pegs® CARES
Questions? Comments?
For additional compliance info:
1-866-432-3735
Contact: [email protected]
MADE IN CHINA
ATTACH THE
MOBILE POWER
SOURCE