LAZBOY Seduce User manual

For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
2012 OWNER’S MANUAL
Seduce
La-Z-Boy®Spas - Sales & Marketing Division
4411 Bee Ridge Road. # 299
Sarasota, Florida 34233
1.800.465.2933
www.lazboyspas.com
3180220

2
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Important: La-Z-Boy Spas is dedicated to offering you the best in customer
satisfaction and service. Be sure to read, complete, sign, and send in the guarantee
card within 30 days of purchase to ensure you understand what you are entitled to
in terms of service. If you have any questions, you can call your local dealer for more
information.
Version 1.0
Copyright © 2011 La-Z-Boy®Spas. All rights reserved. No portion of this manual may be reproduced in
any manner without express written permission from La-Z-Boy Spas.
La-Z-Boy®is a registered trademark of La-Z-Boy Incorporated and is used under license to 2217044
Ontario Inc.
La-Z-Boy Spas may make product modifications and enhancements. Specifications may change without
notice. International products may be configured differently to meet local electrical requirements.
Dimensions are approximate.
La-Z-Boy®Classic Spas
Owner’s Manual
Table of Contents
Safety Information…………………………………………………………………………. 3
Guarantee………………………………………………………………………………….. 7
Introduction…………………………………………………………………………………. 9
Model Overview……………………………………………………………………………. 10
Location and Installation…………………………………………………………………... 12
Electrical Specifications…………………………………………………………………… 15
Start Up……………………………………………………………………………………... 21
Water Quality……………………………………………………………………………….. 26
In-Touch 1000 Controls…………………………………………………………………… 29
Color Coordinated Cover………………………………………………………………….. 31
Water Management………………………………………………………………………... 32
Frequently Asked Questions……………………………………………………………… 33
Troubleshooting……………………………………………………………………………. 36
Maintenance and Care……………………………………………………………………. 41
Shutdown / Winterization………………………………………………………………….. 44
Glossary…………………………………………………………………………………….. 45
Notes………………………………………………………………………………………... 46

3
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Important Safety Instructions and Warnings
Read and Follow All Instructions
To reduce the risk of injury, do not permit children to use this product un-
less they are closely supervised at all times.
Warning: Children should NOT
use a spa / hot tub without alert
adult supervision.
Warning: Do not use spas or hot
tubs unless all suction guards
are installed to prevent body and
hair entrapment.
Warning: People using med-
ications and/or having an ad-
verse medical history should
consult a physician before using
spa or hot tub.
Warning : People with infectious
diseases should not use a spa or
hot tub.
Warning: To avoid injury,
exercise care when entering or
exiting the spa or hot tub.
Warning: Do not use drugs or
alcohol before or during the use
of a spa or hot tub, to avoid
unconsciousness and possible
drowning.
Warning: Pregnant or possibly
pregnant women should consult
a physician before using a spa or
hot tub.
Warning: Water temperature in
excess of 38°C may be injurious
to your health.
Warning: Before entering the
spa or hot tub, measure the
water temperature with an accu-
rate thermometer.
Warning: Do not use a spa or
hot tub immediately following
strenuous exercise.
SAVE THESE INSTRUCTIONS

4
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Important Safety Instructions and Warnings
Read and Follow All Instructions
To reduce the risk of injury, do not permit children to use this product un-
less they are closely supervised at all times.
Warning: Prolonged immersion
in a spa or hot tub may be
injurious to your health.
Warning: Do not permit or use
electric appliances (such as a
light, telephone, radio or
television) within 1.5 meters of
spa or hot tub.
Caution: Maintain water
chemistry in accordance with the
manufacturer’s instructions.
Hyperthermia occurs when the
internal temperature of the body
reaches a level several degrees
above the normal body
temperature of 37°C. The
symptoms of hyperthermia
include:
1) Unawareness of impending
hazard;
2) Failure to perceive heat;
3) Failure to recognize the need
to exit the spa or hot tub;
4) Physical inability to exit the
spa or hot tub;
5) Fetal damage in pregnant
women; and
6) Unconsciousness and
resulting in the danger
of drowning.
Warning: The use of alcohol or
drugs can greatly increase the
risk of fatal hyperthermia
in hot tubs or spas.
SAVE THESE INSTRUCTIONS
HYPERTHERMIA

5
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Warning Sign
Warning Sign Must Be Posted – The orange WARNING sign like the one shown is
packed with your new spa / hot tub. This sign must be posted in a prominent place in
close proximity to the spa installation site immediately upon completion of spa
installation.
Important: It is extremely important that this sign be permanently placed in clear view
of persons using the spa / hot tub. Occasional spa / hot tub users may not be aware of
some of the dangers hot water poses to pregnant women, small children, seniors, and
people under the influence of alcohol. If you did not receive a warning sign or your
sign has become damaged, please call your local dealer for a replacement.

6
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Dealer:
Installer:
Spa:
Date Purchased: ___________________________________________________________________
Company: ___________________________________________________________________
Address: ___________________________________________________________________
Telephone: ___________________________________________________________________
Date Installed: __________________________________________________________________
Company: __________________________________________________________________
Address: __________________________________________________________________
Telephone: __________________________________________________________________
Date Delivered: ___________________________________________________________________
Model: ___________________________________________________________________
Color: ___________________________________________________________________
Serial Number: ___________________________________________________________________
Your unique spa / hot tub serial number is located on a data plate on the back of the
equipment access door below the topside control panel. When calling for service,
please have your serial number in hand.

7
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.

8
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.

9
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Introduction
Your choice of a La-Z-Boy®Classic Spa indicates that you are devoted to excellence.
The management and staff appreciate your patronage and take pride in the tradition of
quality spas / hot tubs that our company represents.
To properly acquaint yourself with your spa / hot tub, we suggest that you take time to
read through this manual before hook up and operation. Doing so will familiarize you
with important operating and safety procedures, thereby ensuring an enjoyable
experience right from the start.
If you need any more information than this manual provides, feel free to call your local
dealer or visit our web site at www.lazboyspas.com.
WARNING: This manual was written to ensure the proper use and
installation of your spa / hot tub. Any modifications to the
procedures outlined in this manual may result in voiding your
guarantee.
This manual and its contents are subject to change without notice. Although we have
prepared this manual as accurately as possible, we are not liable for errors or
omissions; loss, injury, or damages caused by improper installation; or use of spa / hot
tub (improper or otherwise).
Notes:_______________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________

10
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Model Overview
Seduce - 120V Operation
Dimensions: 84”L x 84”W x 35”D
Seats: 5
Water Jets: 30
Capacity: 251 USG / 950L
Dry Weight: 400 Lbs / 182 kg
Filled Weight: 2500 Lbs / 1134 kg
Electrical: 120VAC 15A 60Hz
GFCI: 15A GFCI and cord Included

11
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Model Overview
Seduce - 240v Operation
Dimensions: 84”L x 84”W x 35”D
Seats: 5
Water Jets: 30
Capacity: 251 USG / 950L
Dry Weight: 400 Lbs / 182 kg
Filled Weight: 2500 Lbs / 1134 kg
Electrical: 240 VAC 50A 60Hz
GFCI: 50 Amp (Not Included)

12
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Location and Installation
Proper planning is an important consideration when installing your new spa / hot tub.
Site selection is a critical step and requires serious thought. Planning ahead makes the
installation process easier. The following information is provided to assist you in site
preparations.
1. Always comply with local building codes and obtain any necessary permits. You
may also need to consult with an engineer to address your specific design
needs.
2. Contact an electrician to assess your electrical needs, install wiring, and assure
a safe operation.
3. Position your spa / hot tub with proper access to water, drainage, and electricity.
4. Place your spa / hot tub on a uniform solid, flat surface designed to properly
support its weight. For external installations, a 4-inch (10 cm) thick cement pad
suffices. See page 14 for conduit entry locations for your model spa.
5. For internal installations, check the load carrying capabilities of the floor on
which the spa will reside. Most homes meet the requirement of 80 pounds per
square foot.
6. Assure that your spa / hot tub will fit into the space you have chosen and the
delivery route will accommodate its large size.
7. Provide adequate ventilation for the humidity created by your spa / hot tub. In
most cases, the Color Coordinated Cover is sufficient.
8. Protect the pump and all equipment from the weather by ensuring the cabinet
panels are secure at all times.
9. Allow 6 inches (10 cm) of unobstructed access to all sides (front 36 inched / 1
meter) of your spa / hot tub for normal servicing. Your spa / hot tub is not de-
signed to be recessed in the ground or in a deck.

13
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Location and Installation
Figure 1 – Clearances and Support

14
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
The following dimensions can be used to determine the proper location of submerged
conduits in concrete slab installations. All dimensions are made from the outside of the
spa / hot tub. The topside control panel is shown at bottom of the diagram for
reference.
Figure 2 – Conduit Entry Location Reference Points
Model Dimension A Dimension B
Seduce 30” / 76 cm 8” / 20 cm
Table 1 – Conduit Entry Location Dimensions
10.Consider positioning your spa / hot tub out of or adequately protecting it from
the wind. Just as people can get cold on cool / windy days so can your spa / hot
tub. Windy environments can significantly increase operating costs.
11.Consider using an insulating pad. In cold climates, the ground can rob heat from
the spa / hot tub and increase your operating costs. Consider using a suitable,
outdoor insulating pad in such environments.
A
B

15
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Electrical Specifications
120 Volt Electrical Installation
(North America 60hZ)
Always follow applicable local, state and
federal codes and guidelines.
• Use a dedicated electrical line with a 15A
breaker.
• Cord-and-plug connections may not use a cord
longer than 15 feet (4.6 m) and must be plugged
into a dedicated 15A GFCI connection (NEC
680.42(A)
• Do not use extension cords!
• Always use a weatherproof-covered receptacle.
• Receptacle shall be located not less than 5 feet
(1.5 m) from and not exceeding 10 feet (3.0 m)
from the inside wall of the spa. (NEC 680.43(A))
• Do not bury the power cord. If your cord
becomes damaged, replace it before next usage.
• All 120V spas use a GFCI cord and plug as
shown.
• Test the GFCI plug prior to first use and
periodically when the spa is powered. To test the
GFCI plug version, follow these instructions. (Spa
should already be plugged in and operational.)
1. Press the TEST button on the GFCI. The GFCI
will trip and the spa will stop operating.
2. Press the RESET button on the GFCI. The
GFCI will reset and the spa will turn back on.
The spa is now safe to use.
• If the GFCI trips while the spa is in use, press
the RESET button. If the GFCI does not reset,
unplug the spa and call your local La-Z-Boy Spas
dealer for service. DO NOT USE THE SPA!
IF USING THE STANDARD 120V SERVICE, YOU MUST USE A DEDICATED LINE, WHICH MEANS THAT
THERE CANNOT BE ANY OTHER HOUSEHOLD ITEMS CONNECTED TO THE CIRCUIT OR OUTLET AT ALL!
HAVINGANY OTHER ELECTRICAL APPLIANCES AT ALL ON THIS CIRCUIT WHILE THE SPA IS RUNNING
WILL TRIP THE BREAKER IMMEDIATELY. DO NOT USE ANY TYPE OF EXTENSION CORDS BETWEEN THE
SPA AND THE WALL OUTLET, THIS WILL ALSO CAUSE THE BREAKER TO TRIP AND CAN BE A
POTENTIAL FIRE HAZARD.

16
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Electrical Specifications
120V to 240 V Conversion
(North America 60hZ)
Some spa owners choose to have their spa converted
from 120V operation to 240V operation for greater energy efficiency.
WARNING: The electrical circuit must be installed by a licensed
electrical contractor and approved by a local building or electrical
inspector. Failure to comply with state and local codes may result in
fire or personal injury and will be the sole responsibility of the spa
owner.
The steps to converting your spa from 120V to 240V operation are shown below
and must be completed by a licensed electrician.
Power supply installation must include a properly rated GFCI circuit breaker. The
circuit must be dedicated and should not be shared with any other appliances. It
should be labeled and easily accessible to users. The power supply must be hard
wired into the power pack. A hole may be drilled through the resin cabinet near the
electrical pack to accommodate wiring. Foam insulation may be sprayed around the
hole to fill any gaps between the cabinet and the wiring.
Step 1.
Disconnect jumper form J11
Step 2.
Disconnect the other end of the same
jumper form J33

17
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Electrical Specifications
120V to 240 V Conversion Continued
Step 3.
Turn Dipswitch #10 off (down). To run
at 240V, dipswitch #7 should be in the
on position.
Your 240V wiring should look like
this.
See Wiring Diagram on page 18 for
further information.
If wiring appears differently,
DO NOT power your spa! Consult a
certified electrician.
To run at 120V, dip switches #7 & 10 are the only ones that should be in the ON position. Adjusting any
other dip switches will render the spa inoperable and may cause permanent damage. This also voids all
warranties.
PLEASE CHECK YOUR LOCAL BUILDING CODES AND ONLY USE A CERTIFIED ELECTRICIAN
TO INSTALL ANY ELECTRICAL COMPONENTS TO YOUR SPA.

18
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Electrical Specifications
240 V Electrical Installation
(North America 60hZ)
WARNING: The electrical circuit must be installed by a licensed
electrical contractor and approved by a local building or electrical
inspector. Failure to comply with state and local codes may result in
fire or personal injury and will be the sole responsibility of the spa
owner.
• All 240V spas must be permanently hardwired to
the power supply. See wiring diagram on page 20.
• Spas must be wired using this procedure. Any
variance from these instructions will void your
warranty and may result in serious injury.
• When installed in the United States, the electrical
wiring of this spa must meet the requirements of
National Electric Code, ANSI/NFPA 70-2008 and
any applicable local, state, and federal codes.
• The power supplied to the spa must be on a
dedicated GFCI protected circuit as required by
ANSI/NFPA 70 with no other appliances or lights
sharing the power.
GFCI and Wiring Requirements
• Use copper wire with THHN insulation. Do not
use aluminum wire.
• Use the table on this page to determine your
GFCI and wiring requirements.
• When NEC requires the use of wires larger than
# 6 AWG, install a junction box near the spa and
use # 6 AWG wire between the junction box and
the spa.
• Wire runs over 85 feet must increase wire gauge
to the next lower number.
Testing the GFCI Breaker
Test the GFCI breaker prior to first use and
periodically when the spa is powered. To test the
GFCI breaker follow these instructions:
1. With spa operating, press the TEST button on
the GFCI. The GFCI will trip and the spa will shut
off.
2. Reset the GFCI breaker by switching the
breaker to the full OFF position, wait a moment,
then turn the breaker back on. The spa should
have power.
Warning: Never set a spa to run on
high power without installing a
properly rated GFCI.
Balboa Pack
Model No. and Part No. Usage Description And Settings GFCI Required Wires Required
Model No. VS501Z
Part No. 54379-03
1 Pump Spa
(Pumps on hi + heat)
Dip Switch # 7 is ON 240V 50 AMP #6 AWG
Copper
Locate Dip Switch Panel

19
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Parts with extra low voltage (not exceeding 12V) must be inaccessible to a person in
the spa / hot tub. Earthed appliances must be permanently connected to fixed wiring.
Parts incorporating electrical components must be located or fixed so that they
cannot fall into the spa / hot tub.
Means for disconnection must be used with fixed wiring configurations in accordance
with local wiring rules.
IMPORTANT: To allow the GFCI to function properly, connect the white Neutral wire
from the spa / hot tub to the Neutral terminal on the GFCI breaker, not the Neutral bus
in the GFCI breaker box. An improperly connected Neutral causes the GFCI breaker
to trip.
Figure 3 - GFCI Wiring
WARNING: Disconnect the electrical power before servicing.
Before obtaining access to terminals, all supply circuits
must be disconnected.
WARNING

20
For HELP, call La-Z-Boy®Spas at 1.800.465.2933.
Figure 4 - U.S. and Canada Wiring Diagram
See wire size chart on page 18.
Important: Use only a properly sized 50 AMP GFCI Circuit Breaker (240V
Operation Only). Installation, including selection of conductor size and type, must be
performed by a qualified electrician in accordance with the National Electrical Code or
the Canadian Electrical Code, and all federal, state, provincial and local codes and
regulations in effect at the time of installation.