Le Pan Pro User manual

Quick Start Guide
LePan Pro Smart Watch
Thank you for choosing the LePan Pro Bluetooth Smart Watch. Please read this Quick Start Guide carefully
to better understand the functions prior to using the Smart Watch.
Mobile Phone Compatibility
Android: Supports Android 5.0+
iOS: Supports iOS 8.0+
Bluetooth Version: BT 4.0
Getting Started
Power Button Operation
Hold the Power Button down for 3 seconds to power the watch on. When powering on your LePan Pro
for the first time, it may take longer than usual due to initial app optimization. Once fully powered on, you
will be prompted for the following:
Language settings
Personal information settings
QR code provided to download and install the WiiWatch app on your phone
You can enter the Power Menu at any time by holding the Power Button for 2 seconds.
Power off –Tap to power off
Reboot –Tap to reboot
Power Save –Tap to enter power-saving mode
(The watch will enter into the power-saving mode automatically when the battery is getting low)
Recent Task –Allows you to close recent tasks by swiping the app windows to the left
Full/small - Changes the way Play store apps display on the watch. Tap on the “full/small”icon at
the top of the screen to switch display modes. Some Play store apps may require you to switch to
“small”to access side navigation menus, etc. “Full”provides a larger viewing experience.
You can return to the Main Menu from any app by pressing the Power Button or simply Swipe Right. You
can also use the Power Button to wake the screen up at any time.
Touchscreen Operation
The LePan Pro Smart Watch touchscreen functions similar to a smartphone or tablet. The following six
motions will help you navigate through Smart Watch functions and other apps:
Swipe Left Swipe Right Swipe Down Swipe Up Press Down Tap
WARNING: The watch is NOT water-resistant. Do not get the watch wet or submerge underwater.
Le Pan Pro Diagram

Menu Operation
Swipe Left on the watch face to enter the Main Menu. From here, you can access main watch functions and
apps.
Swipe Right on the watch face to enter the Notification screen. This will display any unseen notifications.
Swipe Down on the watch face to enter watch status and quick settings. Swipe Right to access all 3 pages.
Page 1: Battery level, Bluetooth pairing status, Bluetooth connection status, time and date
Page 2: Alert Mode (Vibrate+Screen / Silent), Gesture Wake, Brightness (Low,Mid,High),
Bluetooth, Wi-Fi, GPS switch and Airplane Mode. Tap to turn each function on/off. Icons will
turn blue when function is ‘on’.
Page 3: Pedometer Display
Swipe Up on the watch face to view weather information (Wi-Fi connection required).
Selecting a Watch Face
The LePan Pro makes it easy to change your watch face. With 12 pre-installed faces, plus many more
available to download (Wi-Fi connection required), you can always find a watch face to match your mood,
outfit, or occasion!
Press Down on the watch face for 1 second to enter the watch face selection page.
Swipe Right or Left to view watch face options.
Swipe all the way right to download additional watch faces (requires Wi-Fi connection).
Tap on a watch face to apply it. Repeat the above process to easily switch watch faces.

Connecting LePan Pro to Wi-Fi (For all functions that require Wi-Fi)
Certain functions on this Smart Watch require a Wi-Fi connection to function. Default apps that require Wi-
Fi include Browser, Weather, Voice Search, Play Store and Google Maps.
1) Under the Main Menu, choose Settings > Connect > Wi-Fi
2) Turn Wi-Fi on by tapping the radio switch at the top of the screen.
3) Choose your network, enter the password (if required) and tap Connect
Connecting LePan Pro via Bluetooth / WiiWatch App (For all Bluetooth functions)
Certain functions on this Smart Watch require a Bluetooth + App connection to the watch in order to
function. Default Apps that require Bluetooth connection include Bluetooth Call, Music Control, Remote
Capture, and Find My Device.
Note: Please install the WiiWatch App on your mobile phone, pair the LePan Pro to your phone via
Bluetooth, and connect inside the WiiWatch App for full functionality.
On Your Phone
1) In Google Play store (Android) or App Store (iOS), search for WiiWatch and install the app.
2) Turn your Bluetooth ‘on’ and ensure it’s visible to nearby devices.
-Please make sure your phone has enough free space, and that your
operating system is compatible with the App (Android 5.0+ / iOS 8.0+).
-Please note that the App is subject to change without notice.
On Your Watch
1) Under the Main Menu, choose Settings > Connect > Bluetooth
2) Turn Bluetooth on by tapping the radio switch at the top of the screen
3) When your phone appears under ‘Available devices”, tap to pair
4) Confirm pairing on phone if necessary
Once paired, enter the WiiWatch App on your phone. Tap the settings icon in the lower right corner, and
then select ‘Device Management’ to ensure your LePan Pro is connected. Tap ‘Find Equipment’ to re-connect
your device, if necessary.
Smart Watch Functions
Bluetooth Call: Connects the watch with your mobile phone and allows you to make calls, sync call
history and sync phonebook. Follow the instructions below to use this function:
1) Enter Bluetooth Call from Main Menu, and Swipe Right three times to get to the fourth screen
-‘Settings’.
2) Tap “Scan”to find your mobile phone. If your device is already displayed, skip to Step 3
3) Tap on your device to open the Connection Options Menu.
oIf the status shows “Unpaired”, tap your device and select “Pair”. The pairing request will
appear on your mobile phone and the watch. Select pair and approve connection if
necessary.
oIf the status shows “Paired”, tap your device and select “Connect”.
oIf the status shows “Connected”, you are ready to make and receive calls.

4) Tap the “Synchronize”button under ‘Call History’and ‘Phonebook’screens to sync the watch
with your phone.
oPhonebook sync speeds varies with the amount of contacts being sync
Health: Access heart rate monitor and pedometer functions. Ensure a snug fit to ensure the heart rate
monitor works properly. Pedometer displays daily steps, with optional interval pedometer.
Music control: When connected to your phone via Bluetooth, use your watch to play, pause, skip tracks
and adjust volume of the music on your phone.
Settings: The following options can be found under the ‘Settings’menu:
Sound: Control media, alarm and ring volume as well as vibrate settings.
Display: Control screen brightness and screen sleep settings.
App List Style: Choose between list and round menu styles. List provides a more traditional user
menu, round is a more modern style.
Connect: Bluetooth, Wi-Fi, and GPS settings.
Gesture: Screen on raising (gesture wake), pedometer service.
Power saving: View overall power consumption and specific power consumption by app.
Language & input: Change language, keyboard and speech settings.
Date & time: Change date and time settings.
Reset equipment: Back up data and reset settings.
Uninstall application: Easily remove installed apps.
About watch: Device information, developer options and system update.
Browser: Simple internet browser, use for basic functions. (Wi-Fi connection required)
Music: Play and control music stored in the watch.
Gallery: View pictures or video taken by the camera or downloaded.
Camera: Take pictures or video with the built-in camera.
Clock: Set up to 8 different alarms
File Manager: Manage files stored on the watch.
Remote Capture: When connected to your phone via Bluetooth, use your watch to remotely control the
shutter on your phones camera. Great for selfies and group pictures!
Find my device: Find your phone via Bluetooth connection. Phone will ring until stopped.
Sound Recorder: Record voice notes and other sounds.
Weather: Local weather information. (Wi-Fi connection required)
Calendar: View by day, week or month.
Voice search: Google voice search –search the internet with your voice (Wi-Fi connection required)
Play store: Google Play store –download games, apps and more. (Wi-Fi connection required)
Maps: Google Maps –see your current location, view maps and directions. (Wi-Fi connection required)
Switch Platform: If switching from an Android to iOS or vice versa, tap here and the watch will reboot
automatically. After the reboot, please re-connect the phone and watch.
Connect phone: Displays a QR code link to the WiiWatch App and instructions for connecting watch to
your phone.
Charging Instructions
-Please charge the smart watch completely (1-2 hours) before use.
-Please use a USB charger or computer USB port to connect the magnetic charging
cable to the watch. Ensure all 4 charging pins are making proper contact before charging.

WiiWatch App Guides
WiiWatch App Guide for iOS
Location
After connecting successfully, tap the “Position” icon to enter the location interface. Your location will
be marked.
You can also share with friends by tapping the share button in the top right corner.
Tap “Position”to enter the map interface.
Sport Interface
To enter the Sport interface, tap the “Sport” icon at the bottom of the screen. Activity will be
monitored from start to finish, and the app will record duration, distance and calories burned. Tap “SPORT”
on the interface to review data for the past day, week and month.
Swipe Right on the step counter to enter the Heart Rate interface. Press the “HRM” icon to start heart
rate monitoring on the watch. Tap “HEART RATE”on the Heart Rate interface to review data for the past
day, week and month.
Setup
Motion settings: Set your daily goal in steps.
Camera switch: Tap here to enable or disable Remote Capture.
Music switch: Tap here to enable or disable remote Music Control.
Device Management: Show your WiiWatch app ID.
Feedback: Input your comments and suggestions.

WiiWatch App Guide for Android
Location
After connecting successfully, tap the “Location” icon at the bottom of the screen to enter the
location interface. Your location will be marked.
Sport Interface
To enter the Sport interface, tap the “Sport” icon at the bottom of the screen. Activity will be
monitored from start to finish, and the app will record duration, distance and calories burned. Tap “SPORT”
on the interface to review data for the past day, week and month.
Swipe Right on the step counter to enter the Heart Rate interface. Press the “HRM” icon to start heart
rate monitoring on the watch. Tap “HEART RATE”on the Heart Rate interface to review data for the past
day, week and month.
Settings
To enter the Settings interface, tap the “Settings” icon on the bottom of the screen.
Sports settings: Set your daily goal in steps.
Camera switch: Tap here to enable or disable Remote Capture.
Music switch: Tap here to enable or disable remote Music Control.
Device Management: Tap “START”to search for device. Click on “LePan Pro”to connect your device. After
successfully connecting, LePan Pro will display under connected devices. Tap “FIND EQUIPMENT”to find
your smart watch if it’s lost.
Apply reminder: Select the application reminder.
Software update: Tap to check for software update.
Feedback: Input your comments and suggestions.