Leader LT 4610 User manual

LT 4610 / LT 4611
SYNC GENERATOR
LT 4610SER01 GPS/TC
LT 4610SER02 12G-SDI
LT 4610SER03 PTP
LT 4610SER24 8K
LT 4611SER21 SYNC 3 OUT ADD
LT 4611SER22 SDI OUTPUT
LT 4611SER23 AUDIO OUTPUT
LT 4611SER24 8K
Instruction Manual
Thank you for purchasing.
Please carefully read this instruction manual and the included "GENERAL SAFETY SUMMARY.”
Please use the product safely.

TABLE OF CONTENTS
GENERAL SAFETY SUMMARY .................................................................................. I
1. INTRODUCTION ............................................................................................ 1
1.1 Scope of Warranty...................................................................................................... 1
1.2 Trademarks ............................................................................................................... 1
1.3 Operating Precautions................................................................................................. 2
1.3.1 Power Supply Voltage........................................................................................... 2
1.3.2 Maximum Allowable Input Voltage ......................................................................... 2
1.3.3 Mechanical Shock................................................................................................. 2
1.3.4 Electrostatic Damage ........................................................................................... 2
1.3.5 Warming Up........................................................................................................ 2
1.4 Terminology Used in This Manual ................................................................................. 3
2. PRODUCT CONFIGURATION............................................................................ 4
2.1 Main Unit .................................................................................................................. 4
2.2 Hardware Options ...................................................................................................... 4
2.3 Software Options ....................................................................................................... 4
3. GENERAL ..................................................................................................... 1
4. FEATURES .................................................................................................... 2
4.1 LT 4610 Main Unit ...................................................................................................... 2
4.2 LT 4611 Main Unit ...................................................................................................... 4
4.3 LT 4610SER01 (GPS/TC) ............................................................................................. 5
4.4 LT 4610SER02 (12G-SDI)............................................................................................ 6
4.5 LT 4610SER03 (PTP) .................................................................................................. 7
4.6 LT 4610SER24 (8K) .................................................................................................... 7
4.7 LT 4611SER21 (SYNC 3 OUT ADD)............................................................................... 8
4.8 LT 4611SER22 (SDI OUTPUT)...................................................................................... 8
4.9 LT 4611SER23 (AUDIO OUTPUT) ................................................................................. 9
4.10 LT 4611SER24 (8K) .................................................................................................... 9
5. SPECIFICATIONS..........................................................................................10
5.1 LT 4610 Main Unit .....................................................................................................10
5.1.1 Compliant Standards ...........................................................................................10
5.1.2 SDI Formats and Standards .................................................................................10
5.1.3 I/O Connectors...................................................................................................12
5.1.4 Control Connectors .............................................................................................13
5.1.5 LCD...................................................................................................................13
5.1.6 SDI Video Output................................................................................................14
5.1.7 Genlock Function ................................................................................................17
5.1.8 Analog Video Sync Signal Output ..........................................................................18

5.1.9 AES/EBU Digital Audio Output ..............................................................................19
5.1.10 AES/EBU Silence Output ......................................................................................19
5.1.11 Word-Clock Output .............................................................................................19
5.1.12 Lip Sync Patterns ................................................................................................19
5.1.13 Preset Settings ...................................................................................................20
5.1.14 Logging Feature..................................................................................................20
5.1.15 Internal Reference Generator ...............................................................................20
5.1.16 Internal Clock.....................................................................................................20
5.1.17 General Specifications .........................................................................................20
5.2 LT 4611 Main Unit .....................................................................................................21
5.2.1 Compliant Standards ...........................................................................................21
5.2.2 I/O Connectors...................................................................................................21
5.2.3 Control Connectors .............................................................................................22
5.2.4 LCD...................................................................................................................22
5.2.5 Genlock Function ................................................................................................23
5.2.6 Analog Video Sync Signal Output ..........................................................................24
5.2.7 Word-Clock Output .............................................................................................24
5.2.8 Preset Settings ...................................................................................................24
5.2.9 Logging Feature..................................................................................................24
5.2.10 Internal Reference Generator ...............................................................................24
5.2.11 Internal Clock.....................................................................................................25
5.2.12 General Specifications .........................................................................................25
5.3 LT 4610SER01 (GPS/TC) ............................................................................................26
5.3.1 GPS Lock ...........................................................................................................26
5.3.2 CW I/O..............................................................................................................26
5.3.3 LTC I/O..............................................................................................................26
5.3.4 Time Code .........................................................................................................27
5.4 LT 4610SER02 (12G-SDI)...........................................................................................28
5.4.1 Compliant Standards ...........................................................................................28
5.4.2 SDI Formats and Standards .................................................................................28
5.4.3 SDI Output Connector .........................................................................................34
5.4.4 SDI Pattern Generation........................................................................................34
5.4.5Lip Sync Patterns ................................................................................................38
5.4.6 User Payload ID..................................................................................................38
5.5 LT 4610SER03 (PTP) .................................................................................................39
5.5.1 Compliant Standards ...........................................................................................39
5.5.2 RJ-45 Port .........................................................................................................39
5.5.3 SFP / SFP+ Port..................................................................................................39
5.5.4 Master Function..................................................................................................39
5.5.5 Slave Function....................................................................................................40
5.6 LT 4611SER21 (SYNC 3 OUT ADD)..............................................................................41
5.6.1 Compliant Standards ...........................................................................................41
5.6.2 Output Connectors..............................................................................................41
5.6.3 Analog Video Sync Signal Output ..........................................................................41
5.7 LT 4611SER22 (SDI OUTPUT).....................................................................................42
5.7.1 Compliant Standards ...........................................................................................42
5.7.2 SDI Formats and Standards .................................................................................42

5.7.3 Output Connectors..............................................................................................44
5.7.4 SDI Video Output................................................................................................44
5.7.5 Lip Sync Patterns ................................................................................................47
5.8 LT 4611SER23 (AUDIO OUTPUT) ................................................................................48
5.8.1 Compliant Standards ...........................................................................................48
5.8.2 Output Connectors..............................................................................................48
5.8.3 AES/EBU Digital Audio Output ..............................................................................48
5.8.4 AES/EBU Silence Output ......................................................................................48
5.9 LT 4610SER24 / LT 4611SER24 (8K) ...........................................................................49
5.9.1 Compliant Standard ............................................................................................49
5.9.2 SDI Formats and Standards .................................................................................49
5.9.3 8K SDI Pattern Generation ...................................................................................50
5.9.4 Lip Sync Patterns ................................................................................................51
5.9.5 User Payload ID..................................................................................................51
5.10 Items Sold Separately................................................................................................51
6. PANEL DESCRIPTION....................................................................................52
6.1 Front Panel...............................................................................................................52
6.2 Rear Panel................................................................................................................53
7. BASIC OPERATION .......................................................................................54
7.1 Turning the Power On ................................................................................................54
7.2 Attaching the Cover Inlet Stopper ...............................................................................56
7.3 Alarm Indications ......................................................................................................57
7.4 Connecting a USB Memory Device...............................................................................57
7.5 Installing the SFP / SFP+ Transceiver Module (SER03)...................................................58
7.6 Signal I/O ................................................................................................................59
7.6.1 Analog Video Sync Signal Output ..........................................................................59
7.6.2 SDI Signal Output ...............................................................................................59
7.6.3 AES/EBU Signal Output .......................................................................................60
7.6.4 Word-Clock Signal Output ....................................................................................60
7.6.5 Genlock Signal Input ...........................................................................................61
7.6.6 GPS Signal Input (SER01) ....................................................................................61
7.6.7 CW Signal I/O (SER01)........................................................................................62
7.6.8 LTC Signal I/O (SER01) .......................................................................................62
7.6.9 12G-SDI Signal Output (SER02) ...........................................................................63
7.6.10 PTP port (SER03)................................................................................................64
7.7 Menu Operations.......................................................................................................65
7.8 Genlock Operation .....................................................................................................67
7.8.1 Internal Mode.....................................................................................................67
7.8.2 Auto Format Mode ..............................................................................................68
7.8.3 Manual Format Mode...........................................................................................70
7.8.4 GPS Mode (SER01) .............................................................................................71
7.8.5 CW Mode (SER01) ..............................................................................................72
7.8.6 PTP Mode (SER03) ..............................................................................................73

8. STATUS MENU .............................................................................................74
8.1 Genlock Status Display...............................................................................................75
8.2 Genlock Format Display..............................................................................................76
8.3 Alarm Display ...........................................................................................................77
8.4 Attention Display (SER01) ..........................................................................................79
8.5 Satellite Count Display (SER01) ..................................................................................79
8.6 CN Display (SER01) ...................................................................................................80
8.7 PTP Attention Display (SER03) ....................................................................................80
8.8 PTP PHASE Display (SER03) .......................................................................................80
8.9 UTC Display (SER01) .................................................................................................80
8.10 Local Time Display (SER01)........................................................................................80
8.11 Internal Clock Display (SER01) ...................................................................................80
9. INFO MENU .................................................................................................82
9.1 Genlock Setting Display..............................................................................................83
9.2 Black Setting Display .................................................................................................84
9.3 SDI Setting Display ...................................................................................................85
9.4 GPS Setting Display (SER01) ......................................................................................85
9.5 12G Setting Display (SER02) ......................................................................................85
10. GENLOCK MENU...........................................................................................86
10.1 Selecting the Genlock Mode ........................................................................................86
10.2 Selecting the Genlock Format .....................................................................................87
10.3 Adjusting the Timing .................................................................................................88
10.3.1 Adjusting the Timing (Frame)...............................................................................88
10.3.2 Adjusting the Timing (Line)..................................................................................88
10.3.3 Adjusting the Timing (Dot) ..................................................................................89
10.3.4 Finely Adjusting the Timing..................................................................................89
10.4 Setting the Recovery Operation...................................................................................90
10.4.1 Selecting the Recovery Mode................................................................................90
10.4.2 Selecting the Auto Setting....................................................................................90
10.4.3 Selecting the Manual Setting ................................................................................91
10.4.4 Setting the Relock...............................................................................................91
10.5 Setting the Genlock Log .............................................................................................92
10.5.1 Viewing the Log..................................................................................................92
10.5.2 Adding DETAIL and ALARM ..................................................................................92
10.5.3 Copying the Log to USB.......................................................................................93
10.5.4 Clearing the Log .................................................................................................93
11. BLACK MENU ...............................................................................................94
11.1 Selecting the Black Format .........................................................................................94
11.2 Adjusting the Timing .................................................................................................95
11.2.1 Adjusting the Timing (Frame)...............................................................................95
11.2.2 Adjusting the Timing (Line)..................................................................................95
11.2.3 Adjusting the Timing (Dot) ..................................................................................96

11.3 Turing the Time Code On and Off (SER01) ...................................................................96
11.4 Common Black Signal Settings....................................................................................96
12. SDI MENU ...................................................................................................97
12.1 Setting the SDI Format ..............................................................................................97
12.1.1 Selecting the Image ............................................................................................97
12.1.2 Selecting the Color System ..................................................................................98
12.1.3 Selecting the Frame Frequency.............................................................................98
12.2 Adjusting the Timing .................................................................................................99
12.2.1 Selecting the Timing Reference.............................................................................99
12.2.2 Adjusting the Timing (Line)..................................................................................99
12.2.3 Adjusting the Timing (Dot) ................................................................................ 100
12.3 Selecting the Pattern ...............................................................................................101
12.4 Turning YCbCr On and Off ........................................................................................ 104
12.5 Turning Safety Area Markers On and Off ....................................................................105
12.6 Configuring the Pattern Scroll Feature........................................................................106
12.6.1 Turning Scrolling On and Off...............................................................................106
12.6.2 Setting the Vertical Scroll Speed .........................................................................106
12.6.3 Setting the Horizontal Scroll Speed .....................................................................107
12.7 Setting the Pattern Change.......................................................................................108
12.7.1 Turning Pattern Change On and Off.....................................................................108
12.7.2 Setting the Pattern Change Speed.......................................................................108
12.8 Setting ID Characters ..............................................................................................109
12.8.1 Turning ID Characters On and Off ....................................................................... 109
12.8.2 Recalling ID Characters .....................................................................................110
12.8.3 Creating ID Characters ......................................................................................110
12.8.4 Setting the Vertical Position of ID Characters........................................................111
12.8.5 Setting the Horizontal Position of ID Characters ....................................................111
12.8.6 Selecting the Size of ID Characters .....................................................................112
12.8.7 Selecting the Level of ID Characters ....................................................................112
12.8.8 Turning ID Character Blinking On and Off.............................................................113
12.8.9 Setting the ID Character On-Time.......................................................................113
12.8.10 Setting the ID Character Off-Time.......................................................................113
12.8.11 Turning ID Character Scrolling On and Off............................................................114
12.8.12 Setting ID Character Scroll Speed .......................................................................114
12.8.13 Saving ID Characters.........................................................................................115
12.8.14 Copying ID Characters to the LT 4610 .................................................................116
12.8.15 Copying ID Characters to a USB Memory Device...................................................117
12.8.16 Clearing ID Characters ...................................................................................... 118
12.9 Setting Logos .........................................................................................................119
12.9.1 Display procedure .............................................................................................120
12.9.2 Turning the Logo On and Off ..............................................................................121
12.9.3 Selecting a Logo ...............................................................................................122
12.9.4 Setting the Vertical Logo Position........................................................................122
12.9.5 Setting the Horizontal Logo Position ....................................................................123
12.9.6 Setting the Logo Level....................................................................................... 123
12.9.7 Setting the Logo Transparency ...........................................................................124

12.9.8 Copying Logos to the LT 4610 ............................................................................ 125
12.9.9 Copying Logos to a USB Memory Device ..............................................................126
12.9.10 Clearing a Logo ................................................................................................127
12.10 Configuring Embedded Audio.................................................................................... 128
12.10.1 Turning the Audio On and Off .............................................................................129
12.10.2 Selecting the Resolution.....................................................................................129
12.10.3 Selecting the Pre-emphasis Mode .......................................................................130
12.10.4 Selecting the Frequency ....................................................................................130
12.10.5 Setting the Level...............................................................................................131
12.10.6 Setting Clicks ................................................................................................... 131
12.10.7 Settings Shared by Links....................................................................................132
12.10.8 Settings Shared by Groups.................................................................................132
12.10.9 Settings Shared by Channels .............................................................................. 133
12.11 Turing the Time Code On and Off (SER01) .................................................................134
12.12 Common SDI Signal Settings ....................................................................................134
13. AES/EBU MENU.......................................................................................... 135
13.1 Setting the AES/EBU Output..................................................................................... 135
13.1.1 Turning the Audio Output On and Off .................................................................. 135
13.1.2 Selecting the Frequency ....................................................................................135
13.1.3 Setting the Level...............................................................................................136
13.1.4 Setting Clicks ................................................................................................... 136
13.1.5 Settings Shared by Channels ..............................................................................136
13.1.6 Selecting the Resolution.....................................................................................137
13.1.7 Selecting the Pre-emphasis Mode .......................................................................137
13.1.8 Turing the Time Code On and Off........................................................................137
13.1.9 Adjusting the Timing .........................................................................................138
13.2 Setting the Silence Output........................................................................................138
13.2.1 Selecting the Resolution.....................................................................................138
13.2.2 Adjusting the Timing .........................................................................................138
14. WCLK MENU .............................................................................................. 139
14.1 Adjusting the Timing ...............................................................................................139
15. ETC MENU................................................................................................. 140
15.1 Turning Lip Sync On and Off ..................................................................................... 140
15.2 Description of Lip Sync Patterns ................................................................................141
16. GPS OPTION MENU (SER01) ........................................................................ 142
16.1 Setting the LTC Output ............................................................................................ 142
16.1.1 Turing the Time Code Output On and Off .............................................................142
16.1.2 Adjusting the Time Code Output Timing (Frame) ..................................................142
16.1.3 Adjusting the Time Code Output Timing (Bit) .......................................................143
16.1.4 Adjusting the LTC2 Offset ..................................................................................143
16.1.5 Adjusting the LTC3 Offset ..................................................................................143

16.1.6 Setting the CW I/O ...........................................................................................144
16.1.7 Selecting Input or Output ..................................................................................144
16.1.8 Selecting the Output Frequency..........................................................................144
17. 12G OPTION MENU (SER02)........................................................................ 145
17.1 Setting the SDI Format ............................................................................................145
17.1.1 Selecting the System.........................................................................................146
17.1.2 Selecting the Color System ................................................................................147
17.1.3 Selecting the Frame Frequency...........................................................................147
17.2 Adjusting the Timing ...............................................................................................148
17.2.1 Adjusting the Timing (Line)................................................................................148
17.2.2 Adjusting the Timing (Dot) ................................................................................ 148
17.3 Selecting the Pattern ...............................................................................................149
17.3.1 Switching between Fixed Pattern and User Pattern................................................149
17.3.2 Selecting the Fixed Pattern.................................................................................150
17.3.3 Operating procedure a user pattern ....................................................................153
17.3.4 Displaying a User Pattern...................................................................................154
17.3.5 Selecting a User Pattern ....................................................................................156
17.3.6 Deleting a User Pattern......................................................................................157
17.3.7 Copying a User Pattern to the LT 4610 ................................................................158
17.3.8 Copying a User Pattern to a USB Memory Device ..................................................160
17.3.9 Copying Patterns from the Archive ......................................................................161
17.4 Turning YCbCr On and Off ........................................................................................ 163
17.5 Turning Safety Area Markers On and Off ....................................................................163
17.6 Configuring the Pattern Scroll Feature........................................................................163
17.7 Setting the Pattern Change.......................................................................................163
17.8 Setting ID Characters ..............................................................................................163
17.9 Setting Logos .........................................................................................................163
17.10 Setting the Moving Box ............................................................................................164
17.10.1 Turning the Moving Box On and Off.....................................................................164
17.10.2 Setting the Box Color ........................................................................................164
17.10.3 Setting the Vertical Moving Speed .......................................................................164
17.10.4 Setting the Horizontal Moving Speed ...................................................................165
17.10.5 Setting the Vertical Box Size............................................................................... 165
17.10.6 Setting the Horizontal Box Size...........................................................................165
17.11 Turning Lip Sync On and Off .....................................................................................166
17.12 Turning User Payload ID On and Off ..........................................................................167
17.13 Configuring Embedded Audio.................................................................................... 167
17.14 Common SDI Signal Settings ....................................................................................167
18. 8K OPTION MENU (SER24).......................................................................... 168
18.1 Setting the SDI Format ............................................................................................168
18.1.1 Selecting the System.........................................................................................168
18.1.2 Selecting the Color System ................................................................................168
18.1.3 Selecting the Frame Frequency...........................................................................169
18.2 Adjusting the Timing ...............................................................................................170

18.3 Selecting the Pattern ...............................................................................................170
18.3.1 Switching between Fixed Pattern and User Pattern................................................170
18.3.2 Selecting the Fixed Pattern.................................................................................170
18.3.3 Operating procedure a user pattern ....................................................................172
18.3.4 Displaying a User Pattern...................................................................................172
18.3.5 Selecting a User Pattern ....................................................................................174
18.3.6 Deleting a User Pattern......................................................................................175
18.3.7 Copying a User Pattern to the LT 4610 ................................................................176
18.3.8 Copying a User Pattern to a USB Memory Device ..................................................178
18.3.9 Copying Patterns from the Archive ......................................................................179
18.4 Turning YCbCr On and Off ........................................................................................ 180
18.5 Turning Safety Area Markers On and Off ....................................................................180
18.6 Configuring the Pattern Scroll Feature........................................................................180
18.7 Setting the Pattern Change.......................................................................................180
18.8 Setting the Moving Box ............................................................................................180
18.9 Turning Lip Sync On and Off ..................................................................................... 181
18.10 Turning User Payload ID On and Off ..........................................................................181
18.11 Configuring Embedded Audio.................................................................................... 181
19. PTP OPTION MENU (SER03) ........................................................................ 182
19.1 PTP Master .............................................................................................................182
19.1.1 Setting the Mode .............................................................................................. 182
19.1.2 Setting the BMCA..............................................................................................182
19.1.3 Setting the Profile Type .....................................................................................183
19.1.4 Profile Default Settings ......................................................................................183
19.1.5 Setting the Domain ...........................................................................................183
19.1.6 Setting the Communication Mode .......................................................................184
19.1.7 Setting the Announce Interval ............................................................................185
19.1.8 Setting the Sync Interval ...................................................................................185
19.1.9 Setting Priority 1...............................................................................................186
19.1.10 Setting Priority 2...............................................................................................186
19.1.11Setting the Step ...............................................................................................186
19.1.12 Setting ST2059 (PROFILE: ST2059 only) .............................................................187
19.1.13 Setting the Announce Timeout ...........................................................................188
19.1.14 Setting the Propagation Time Measurement Method..............................................188
19.2 PTP Slave ...............................................................................................................189
19.2.1 Setting the Mode .............................................................................................. 189
19.2.2 Setting the Profile Type .....................................................................................189
19.2.3 Profile Default Settings ......................................................................................189
19.2.4 Setting the Domain ...........................................................................................190
19.2.5 Setting the Communication Mode .......................................................................190
19.2.6 Setting the Desired Announce Message Transmission Interval (UNICAST only) .........191
19.2.7 Setting the Minimum Interval for Receiving Announce Messages (UNICAST only) .....191
19.2.8 Setting the Desired Sync Message Transmission Interval (UNICAST only) ................192
19.2.9 Setting the Minimum Interval for Receiving Sync Messages (UNICAST only).............192
19.2.10 Setting the Delay Message Interval (MULTICAST, MIXED SMPTE w/o NEGOTTIATION)
193

19.2.11 Setting the Desired Delay Response Transmission Interval (Mixed SMPTE, UNICAST) 193
19.2.12 Setting the Minimum Interval for Receiving Delay Responses (Mixed SMPTE, UNICAST)
194
19.2.13 Setting the Announce Timeout ...........................................................................194
19.2.14 Setting the Propagation Time Measurement Method..............................................195
19.2.15 Setting the IP Address of the Master to Connect To (Mixed SMPTE w/o Negotiation,
UNICAST)195
19.2.16 Setting the Asymmetric Delay ............................................................................ 195
20. SYSTEM MENU........................................................................................... 196
20.1 Setting the Backlight ...............................................................................................196
20.2 Turning Key Lock On and Off ....................................................................................196
20.3 Configuring Presets .................................................................................................197
20.3.1 Loading Presets ................................................................................................ 197
20.3.2 Saving Presets..................................................................................................198
20.3.3 Power-on Settings.............................................................................................198
20.3.4 Copying Presets to the LT 4610 ..........................................................................199
20.3.5 Copying Presets to a USB Memory Device ............................................................200
20.3.6 Clearing Presets................................................................................................ 200
20.4 Configuring Ethernet Settings ...................................................................................201
20.4.1 Setting the IP Address....................................................................................... 201
20.4.2 Viewing the MAC Address ..................................................................................201
20.4.3 Turning TRAP Transmission On and Off................................................................201
20.4.4 Setting the Trap Transmission Destination............................................................202
20.4.5 Copying MIB Files to a USB Memory Device .........................................................202
20.4.6 Setting READ COMMUNITY.................................................................................203
20.4.7 Setting WRITE COMMUNITY............................................................................... 203
20.4.8 Setting TRAP COMMUNITY .................................................................................204
20.4.9 Restarting SNMP ...............................................................................................204
20.5 Setting the PTP Ethernet Parameters (SER03) ............................................................205
20.5.1 Setting the PTP IP Address.................................................................................205
20.5.2 Setting the PTP Subnet Mask..............................................................................205
20.5.3 Setting the PTP Gateway ...................................................................................205
20.5.4 Viewing the PTP MAC Address ............................................................................206
20.5.5 Viewing the PTP CLOCK IDENTITY ......................................................................206
20.5.6 Setting SFP/SFP+ .............................................................................................206
20.5.7 Setting PORT RELATION ....................................................................................207
20.6 Date and time settings.............................................................................................208
20.6.1 Selecting the Date and Time ..............................................................................208
20.6.2 Adjusting the Date and Time.............................................................................. 209
20.7 Setting the Time Code (SER01/SER03) ...................................................................... 210
20.7.1 Selecting the Time Code ....................................................................................210
20.7.2 Setting Dropped Frames ....................................................................................211
20.7.3 Turning Jam Sync On and Off .............................................................................211
20.7.4 Setting the Jam Sync Time................................................................................. 212
20.7.5 Turning the Daylight Savings Time On and Off......................................................212
20.7.6 Setting the Daylight Savings Time Start Date .......................................................212