Learning Resources Cash Bash Electronic Flash Card LER 6966 User manual

Cash Bash®Electronic Flash Card™
Got a minute? The Cash Bash®Electronic Flash Card™is a great, hands-on way
to practice coin identification, counting and basic money skills.
Basic Op ration:
Press the Power button to turn the unit on or off.
Slide the Sound switch to mute the sound.
Slide the Level Select switch to choose between Level 1 and Level 2.
LER 6966
Pow r button
Coin buttons
L v l S l ct
switch
Dollar buttons
Sound
Display scr n

L v l 1 – This level is great for younger players who have coin identification and
counting experience, but who are just beginning to add coin values up to a dollar.
Press any Coin button to begin. The game will count down and start.
L v l 2 – Select this level for a real challenge! Level 2 plays exactly as Level 1,
except total amounts go up to $20. Press any coin button to begin.
How to Play
The Cash Bash drill begins after a five-second countdown. You now have 60
seconds to solve as many money problems as you can. A money amount will
display on the screen. Press the Coin and Dollar buttons to add up to that amount.
You’ll hear a “positive” sound for a correct answer and a “negative” sound for an
incorrect answer.
At the end of 60 seconds, your score will be displayed. The top number represents
the number of problems solved correctly and the bottom number shows the
number of problems encountered. (Tip: To go for the high score, use the highest-
value coins first to reach the total amount in the fewest steps.)
To play again, press any button to return to the Level Select screen.
Not : To disable the 60-second timer, press and hold the penny (1 cent) button.
The screen will display 0000 0000 and the timer will be disabled for the game.
This is a great way to practice solving unlimited money problems. To restore the
timer function, select a new game with the Level Select switch.
To save battery power, the Cash Bash®Electronic Flash Card™will power down
automatically if there is no activity after three minutes.

Batt ry Information
Installing or R placing Batt ri s
WARNING! To avoid batt ry l akag , pl as
follow th s instructions car fully. Failur to
follow th s instructions can r sult in batt ry
acid l akag that may caus burns, p rsonal
injury, and prop rty damag .
R quir s: 3 x 1.5V AAA batteries and a Phillips
screwdriver
• Batteries should be installed or replaced by an adult.
• Cash Bash®Electronic Flash Card™requires (3)
three AAA batteries
• The battery compartment is located on the back
of the unit.
• To install batteries, first undo the screw with
a Phillips screwdriver and remove the battery-
compartment door. Install batteries as indicated
inside the compartment.
• Replace compartment door and secure with screw.
Batt ry Car and Maint nanc Tips
• Use (3) three AAA batteries.
• Be sure to insert batteries correctly (with adult
supervision) and always follow the toy and
battery manufacturer’s instructions.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Do not mix new and used batteries.
• Insert batteries with the correct polarity. Positive
(+) and negative (-) ends must be inserted in the
correct directions as indicated inside the battery
compartment.
• Do not recharge non-rechargeable batteries.
• Only charge rechargeable batteries under adult
supervision.
• Remove rechargeable batteries from the toy
before charging.
• Only use batteries of the same or equivalent type.
• Do not short-circuit the supply terminals.
• Always remove weak or dead batteries from the
product.
• Remove batteries if product will be stored for an
extended period of time.
• Store at room temperature.
• To clean, wipe the surface of the unit with a dry
cloth.
• Please retain these instructions for future reference.
Information to Us r
NOTE: This equipment has been tested and found to
comply within the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or experienced radio/TV
technician for help.
NOTE: Changes or modifications not expressly
approved by the party for compliance could void
the user’s authority to operate the equipment.

Look for th s oth r gr at products from L arning R sourc s®:
LER 6964 Word Whiz Electronic Flash Card™
LER 6965 Minute Math Electronic Flash Card™
LER 6967 Multiplication Master Electronic Flash Card™
© Learning Resources, Inc.,Vernon Hills, IL, US
Learning Resources Ltd., Oldmedow Road,
King’s Lynn, Norfolk, PE30 4 X, UK
Please retain our address for future reference.
Made in China. LRM6966-GUD
Fabriqué en Chine. Informations à conserver.
Made in China. Bitte bewahren Sie unsere Adresse
für spätere Nachfragen auf.
Hecho en China. Conservar estos datos.
Your opinion matters! Visit
www.LearningResources.com
to write a product review or to
find a store near you.