LED Lighting FRT5 V2 User manual

FRT5 V2
INSTALLATION MANUAL
Class III
Installaon Requirements
• This xture must be supplied with SELV voltage that does not exceed 50VAC and is normally 24V. Follow the
PSU parameters for input power from the socket.
• Connect to an individual branch circuit.
• LLSA ensures a 2 kV surge protecon on our PSU, anything out of this range will void warranty provided.
• Improper installaon might cause an electric shock accident.
• Use an authorized electrical professionals to do the installaon, repair and maintenance of the light xture.
• Cut o the power before and during installaon, maintenance and repair of the light xture.
• Do not install the light xture on top of or near hot objects to avoid damage. (For example hot gas pipes, exhaust
funnels or stoves)
• Do not install the light xture in a damp area or where liquid leakage is potenal.
• Make sure no re regulaons are violated.
• Do not cover the lamp with a heat insulang material.
• Do not look directly at the light xture for a long period of me to avoid sight damage.
• The use of third party replacement parts is not recommended by the manufacturer for it will lead to warranty void.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualied person.
Cleaning and Maintenance of Enclosure
• Do not use solvent-based cleaning agents, this will cause cracks to form in the plasc diuser covers.
• Clean with a damp cloth and silicone-based cleaning agent. (Such as Mr Min)
• The protecon against electric shock is based on the use of a safety extra low voltage power supply (SELV).
• No provision for earthing is provided.

Product Informaon
Bracket Opons
DIMENSIONS: **** dependant on bracket type PRODUCT WEIGHT: 0.9kg/m PACKAGED WEIGHT: 1.2kg/m
Stainless Steel Galvanized Steel
Installaon Tools
Electric drill and mounting material
appropriate drill bit
Screw type appropriate
screwdriver

Instrucons (steps to follow)
- Magnec mounng
Mounng Methods
Instrucons (steps to follow)
- Bracket mounng

Ensure neat and proper
cable management at all
times.
Failure to do so might
result in cable failure and /
or damage.
Connector types and use
- No-strip connector
Connecon to power
Connector types and use
- TE connector
Always ensure the power
has been disconnected
before installation and
connecting the fittings.
Wiring diagram
- Always check power supply / transformer parameters before connecon