LED Lighting SPOT 300 FRE User manual

We thank you for choosing the projector SPOT 300/500 FRE.
To make the most of this unit and to make it work correctly
in the years, before connecting it to its source and using it,
we suggest you to carefully read this manual.
In this way you will be more familiar with it and its
connections and will be easier to use it.
User’s manual
product code: 991192
All the sections of this manual have been studied to make as easy and complete as possible the use of the SPOT 300/
500 FRE.
To make the manual more clear and easy to consult, we have used the following symbols and conventions:
very important warnings, to be read with the maximum attention;
important parts of the text that give details and/or explanations on the use of the
SPOT 300/500 FRE;
practical advices for an ecient use of the SPOT 300/500 FRE.
!
Make sure that the unit has not been damaged during the transportation.
In case it has happened or in case the unit does not work correctly, immediately contact the Retailer.
If the unit has been directly sent to you , immediately contact the Freight Company.
Only the nal receiver (the person or the Company that receive the unit) is in the position to
complain for the above inconveniences.
The safety of the unit is guaranteed only strictly following the instructions, so it is recommended to
accurately preserve them.
YOUR REFERENCE
Cite the model and the serial number anytime you contact your retailer to ask for information or assistance.
STANDARD PACKAGE
The standard package of the projector SPOT 300/500 FRE contains:
1) Projector ON REQUEST:
)505360edoc(pmaL*rotcennocsniaM)2
)101040edoc(sroodnrabfaeL-4*launams’resU)3
)910491edoc(05ØpmalckcalB*eetnarauG)4
)890040edoc(emarfruolocerapS*emarfruoloC)5
IMPORTANT
!
IMPORTANT
!

1
fig. 1
fig. 2
TECHNICAL FEATECHNICAL FEA
TECHNICAL FEATECHNICAL FEA
TECHNICAL FEATURESTURES
TURESTURES
TURES
PMALPMAL PMAL PMALPMAL 5.9YGW005/003negolaH
PMALPMAL PMAL PMALPMAL
TNEMEVOM
.ediugedilS
LACITREVLACITREV LACITREV LACITREVLACITREV
TNEMEVOM
°54-/°09+
.)1.giF(noitatneirolaunaM
MAEBTHGILMAEBTHGIL MAEBTHGIL MAEBTHGILMAEBTHGIL
EDUTILPMA
2.giFotrefeR
REWOPTUPNIREWOPTUPNI REWOPTUPNI REWOPTUPNIREWOPTUPNI
.zH05;caV032:egatlovgnitarepolanimoN•
.W005/003:ylppusrewopdetaR•
.)caV032(A2.2/3.1:tnerruclanimoN•
GNIKROWGNIKROW GNIKROW GNIKROWGNIKROW
NOITISOP
.noitisopynA
SNOISNEMIDSNOISNEMID SNOISNEMID SNOISNEMIDSNOISNEMID
)HxDxW(
.)1.giF(082x533x532.mm
THGIEWTHGIEW THGIEW THGIEWTHGIEW 5.3.gK
YDOBYDOB YDOB YDOBYDOB .muinimuladnaleetS
!Do not dismantle and modify the unit.
!Always make sure that you are using a safety chain (fig. 4).
!Do not install the unit outdoors directly exposed to rain or moisture.
!To avoid any inflammable liquids, water or metal objects entering the unit.
!To avoid installing the unit close to heat sources. Never to lean the connecting cable on the hot unit.
!The unit must be at a minimum distance of 30 cm. from the walls or from any inflammable material and 1 mt.
from lighted objects.
!The unit must be placed where it could be easily aerated. To avoid obstructing the in/out air gratings.
!Do not directly look at the Lamp when it is on.
BRACKET
LEVER FOR
INSERTING THE
COLOUR FRAME
AND THE 4-LEAF
BARNDOORS
MANUAL
ORIENTATION
KNOB
Amplitude
Distance in mt.
LIGHT BEAM
AMPLITUDE RELATED
TO DISTANCES
WW
WW
WARNINGSARNINGS
ARNINGSARNINGS
ARNINGS
SPOT 300/500 FRESNEL
CODE 991192

The SPOT 300/500 FRE is already equipped with the Colour Frame (fig. 1 and 5).
To insert the filter in the Colour Frame, follow these instructions:
1) Unhook the clamping lever on the left side of the unit (fig. 1 and 4);
2) Take off the Colour Frame and insert the filter;
3) Take off the spring clip, insert the filter and put back the spring clip;
4) Put back the Colour Frame in its room making it sliding on its track.
To fix the 4-Leaf Barndoors (on request - fig. 3) follow these instructions:
1) Unhook the clamping lever on the left side of the unit (fig. 1 and 4);
2) Insert the 4-Leaf Barndoors in their room making them sliding on their track.
fig. 4
2
fig. 3 CODE 040101
The unit must be connected to the earth. The inobservance of
these instructions automatically makes the guarantee expiring.
COLLEGAMENTCOLLEGAMENT
COLLEGAMENTCOLLEGAMENT
COLLEGAMENTO FONTE DI ALIMENTO FONTE DI ALIMENT
O FONTE DI ALIMENTO FONTE DI ALIMENT
O FONTE DI ALIMENTAZIONEAZIONE
AZIONEAZIONE
AZIONE
!Before installing the SPOT 300/500 FRE, make sure that the carrying structure is safe and able to support the weight
of the unit.
The SPOT 300/500 FRE is equipped with a bracket with a hole in the middle (diam. 10 mm.) to fix clamps and/or screw
bolts (fig. 1 and 4).
To orientate the unit follow these instructions:
1) Unscrew the Manual Orientation Knob on the side of the unit (fig. 1);
2) Orientate the unit using the apposite handle at the back (fig. 4);
3) Screw the Manual Orientation Knob.
• It is possible to turn the bracket up or down.
!At the end of the assembling operations make sure that the unit has been correctly and safely fixed.
ASSEMBLINGASSEMBLING
ASSEMBLINGASSEMBLING
ASSEMBLING
Before connecting the unit to the mains, make sure that the working voltage and frequency correspond to the values
indicated on the label (fig. 4).
The SPOT 300/500 FRE is made to work at a working voltage of 230V 50Hz; 1.3/2.2 A (depending from the Lamp).
The unit mains connections are described in fig. 4/a.
FIXING THE COLFIXING THE COL
FIXING THE COLFIXING THE COL
FIXING THE COLOUR FRAME AND THE 4-LEAF BARNDOORSOUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORSOUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORS
CONNECTION TCONNECTION T
CONNECTION TCONNECTION T
CONNECTION TO THE POWER SUPPLO THE POWER SUPPL
O THE POWER SUPPLO THE POWER SUPPL
O THE POWER SUPPLYY
YY
Y
IMPORTANT
!
It is recommended to use only filters with an high temperature resistance.
POWER SUPPLY INPUT
LIGHT BEAM MANUAL
ORIENTATION KNOB
KEY TO OPEN THE
LAMP ROOM
HANDLE
SAFETY CHAIN FIXING EYE
COVER
BRACKET
CLAMPING LEVER TO INSERT
THE COLOUR FRAME AND
THE 4-LEAF BARNDOORS
SPOT 300/500 FRESNEL
CODE 991192
ITALY
SPOT 300/500 FRESNEL
230
500
3.5
150/02
Hz
Amp.
Lamps
Max. Temp.
50
2.2
S.R.L.
H. 500WGY 9.5
50°C
fig. 4/a
L = PHASE (Brown)
N = NEUTRAL (Blue)
= EARTH (Green - Yellow)
THREE POLES FEMALE CONNECTOR
FOR THE CONNECTION TO THE MAINS
LN

g. 5
REGOLAZIONE FREGOLAZIONE F
REGOLAZIONE FREGOLAZIONE F
REGOLAZIONE F ASCIO LASCIO L
ASCIO LASCIO L
ASCIO L UMINOSOUMINOSO
UMINOSOUMINOSO
UMINOSO
3
! Before operating any maintenance disconnect the mains.
For operating a correct maintenance of the SPOT 300/500 FRE follow these instructions:
1) Periodically clean the in/out air grates;
2) Periodically clean the lens and the reecting parabole (g. 5) using antistatic cloths and products.
! Do not absolutely use solvents or abrasive products.
MAINTENANCEMAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE
1) Disconnect the unit before replacing the Lamp. Always wear protective gloves and goggles.
2) Turn, the key at the bottom of the unit, for a quarter of turn and left to right (g. 4 and 5).
3) Open the cover (g. 4 and 5).
4) Fit the new Lamp in its socket not forcing too much (g. 5).
!Take care of not touching the glass of the new Lamp with the nude hands; in case it accidentally happens, clean
the Lamp bulb with a dry cloth and alcohol.
5) Close the cover, turning the key for a quarter of turn right to left.
In case of replacement of the Lamp or maintenance, never open the unit
unless are passed at least 15 minutes after it went o.
FITTING AND REPLAFITTING AND REPLA
FITTING AND REPLAFITTING AND REPLA
FITTING AND REPLA CING THE LAMPCING THE LAMP
CING THE LAMPCING THE LAMP
CING THE LAMP
COLOUR FRAME
LAMP
REFLECTING
PARABOLE
LIGHT BEAM REGULALIGHT BEAM REGULA
LIGHT BEAM REGULALIGHT BEAM REGULA
LIGHT BEAM REGULA TIONTION
TIONTION
TION
Correct regulation of the light beam:
• Unscrew the knob at the bottom of the unit (g. 4);
• To regulate the light beam amplitude run the knob forward/backward;
•Fix the knob.
To avoid any bad performance of the unit or the Lamp breakage
damaging the optics of the SPOT 300/500 FRE, replace the lamp
as soon as its maximum average time ends. The lens must be
replaced when is evidently damaged and if its eciency has
been reduced, for example from slits or deep cuts.
KEY TO OPEN THE
LAMP ROOM
COVER
Rev. 12/2005Working to make its products always more perfect, LED reserves the possibility to make technical changes during the production. The technical features and the drawings on this
manual are not binding for LED and they could be changed at any time without notice. LED it is not responsible for any inconven ience caused by an improper or dierent use of
the unit respect to the one for what it has been made.
IMPORTANT
!