LEDBOX LD1130090 User manual

1
WIFI/LAN/USB-DALI Gateway
(LEDBOX LD1130090)
User Guide
1Overview & specification .........................................................................................................2
1.1 Product description .............................................................................................................2
1.2 Technical parameters ..........................................................................................................2
1.3 Wiring and instruction ........................................................................................................3
1.4 Dimensions..........................................................................................................................4
1.5 Installation and connection example...................................................................................4
2User guide for “WIFI/LAN/USB -DALI” ................................................................................4
2.1 Gateway connection and configuration...............................................................................4
2.1.1 USB connection .......................................................................................................4
2.1.2 TCP/IP network connection .....................................................................................5
2.1.2.1 Basic concepts...............................................................................................5
2.1.2.2Accessing WIFI-DALI for settings ...............................................................5
2.1.2.3 Setting WIFI-DALI as a wireless AP............................................................6
2.1.2.4 Setting WIFI-DALI as wireless STA ............................................................7
2.1.2.5 Setting WIFI-DALI as wired STA ................................................................8
2.1.2.6 Determine the subnet and default gateway IP...............................................9
2.2 Connecting to WIFI-DALI with DALIPRO software.......................................................11
2.3 Connecting to WIFI-DALI with DALINK (Andriod App)...............................................12
2.4 Connecting to WIFI-DALI with DALI Remote (iOS App)..............................................13

2
1Overview & specification
1.1 Product description
a) Acting as WIFI/LAN/USB gateway to a DALI system.
b) Working with DALIPro configuration software for testing, addressing and
configuring DALI system equipment on line.
c) Achieving mobile phone, tablet PCs and other mobile devices to control DALI
lighting system.
1.2 Technical parameters
Input voltage range
6.5～18.5VDC
Power
<2W（Max）
Standard
IEC 62386-101(DALI Protocol Standards)
IEC 62386-102(DALI Protocol Standards)
WIFI Technical Specifications
Network Standard
Wireless Standard
IEEE 802.11n 、IEEE
802.11g、IEEE 802.11b
Wired Standard
IEEE 802.3、IEEE 802.3u
Wireless transmission rate
11n:Up to 150Mbps 11g: Up to 54Mbps 11b: Up to
11Mbps
The number of channels
1-14

3
1.3 Wiring and instruction
NAME
Function Description
PWR
Power supply indicator
S1/S2
S1 and S2 simultaneously flash while without connecting to USB
S1 and S2 alternately flash while connecting to USB
S1 flashes rapidly while DALI signal presenting on the bus
RST(EXT or WPS)
Press it for about 6s to restore the gateway to factory default settings
Wireless Frequency Range
2.4-2.4835G
Transmit Power
12-15DBM
Interface
2 Ethernet port 、2 DALI Interface 、1 USB Interface
（host/slave）、1 Power connector
Antenna Type
External Antenna
WDS Function
Supports WDS wireless bridge
Wireless Security
Wireless MAC address filtering, wireless security function
switch, 64/128/152 bit WEP encryption, WPA-PSK /
WPA2-PSK, WPA / WPA2 security mechanism
Ambient temperature
-10℃～50℃
Storage Temperature
-20℃～60℃
Humidity
5%～85%
Wiring Preparation

4
1.4 Dimensions
1.5 Installation and connection example
2User guide for “WIFI/LAN/USB -DALI”
2.1 Gateway connection and configuration
There are multiple possible ways for a PC accessing to the WIFI/LAN/USB-DALI gateway
（referred to as “WIFI-DALI” for short）.
2.1.1 USB connection
Connection diagram of WIFI-DALI via USB

5
2.1.2 TCP/IPnetwork connection
2.1.2.1 Basic concepts
AP（Access Point）
An AP is a wireless or wired access node/point of the network, which is the creator and the
central node of the network. General wireless router for home or office is anAP.
STA（Station）
Each device (such as laptop, PDA and smart phone) connected to a wireless or wired AP
access point can be referred to as a STA(station).
Constitution of infranet system
Created by AP, consisting of a number of STA joins the wireless or wired network is a infranet
system. The characteristic of such system is that the AP is the center of the entire network,
and all communications in the network are transmitted byAP.
2.1.2.2Accessing WIFI-DALI for settings
Step1: Launch a web browser, type the access IP address in the address bar, and press Enter.
The factory default IP is: 192.168.16.254 Port: 8080
Step2: Input the User Account(ACC) and Password(PSW) for login page. The factory default
ACC and PSW are on the top label of gateway device.
Parameter settings of factory default mode

6
2.1.2.3 Setting WIFI-DALI as a wirelessAP
Connection diagram of WIFI-DALI in AP mode
In this mode, the WIFI-DALI acts as the AP (access point) of the wireless network, and
generates a WiFi signal for smart phone or laptop PC connecting.
Parameters setting guide:
1）NetMode: select < WIFI (AP)-SERIAL>.
2）SSID: input a WIFI network name, eg. "WIFI_DALI".
3）Encrypt Type: select a encrypt mode, eg. "WPA2 AES".
4）Password: input a WIFI network password for accessing, eg. "12345678".
5）IPAddress: input an available IP address, eg. "192.168.11.YYY", the range of YYY should
be 243-254.
6）Subnet Mask: input a subnet mask, eg. "255.255.255.0".
7）Locate/Remote Port Number should be set to"8080".
Parameter settings of Wifi-AP mode

7
2.1.2.4 Setting WIFI-DALI as wireless STA
Connection diagram of WIFI-DALI in wireless STA mode (WiFi client)
In this mode, the WIFI-DALI will be set as a wireless STA for connecting to an existing
WiFi network. The other control smart phones or laptops can access the same Wifi network to
communicate with WIFI-DALI.
Parameters setting guide:
1）NetMode: select < WIFI (CLIENT)-SERIAL>.
2）SSID: Scan and choose the proper WiFi signal created by the router, eg. "Tenda_4580F0".
3）Encrypt Type: select a encrypt mode.
4）Password: input the password for accessing the existing WiFi.
5）IP Type: select "STATIC" static IP address.
6）IPAddress: input an available IP address (subnet in the gateway) eg. "192.168.X.YYY".
Note: 1. For determine the subnet NO. "X" in IP "192.168.x.254", Please refer to
Chapter 2.1.2.6 for reference.
2. The range of "YYY" should be 243-254.
7）Subnet Mask: input a subnet mask, eg. "255.255.255.0".
8）Default Gateway: input the Router gateway to be connected via WIFI-DALI, eg.
"192.168.x.1".
Note: For determine the Default Gateway IP, Please refer to Chapter 2.1.2.6 for
reference.
9）Primary DNS Server: input DNS server IP.
10）Secondary DNS Server: input backup DNS server IP.

8
Parameter settings of Wifi_STA mode
2.1.2.5 Setting WIFI-DALI as wired STA
Connection diagram of WIFI-DALI in wired STA mode (ethernet client)
In this mode, the WIFI-DALI will be set as a ethernet wired STA for connecting to an existing
network. The other control smart phones or laptops can access the same network by WiFi to
communicate with WIFI-DALI gateway.
Parameters setting guide:
1）NetMode: select < ETH-SERIAL>.
2）IP Type: select "STATIC" static IP address.
3）IPAddress: input an available IP address (subnet in the gateway) eg. "192.168.X.YYY".
Note: 1. For determine the subnet NO. "X" in IP "192.168.x.254", Please refer to
Chapter 2.1.2.6 for reference.
2. The range of "YYY" should be 243-254.
4）Subnet Mask: input a subnet mask, eg. "255.255.255.0".
5）Default Gateway: input the Router gateway to be connected via WIFI-DALI, eg.
"192.168.x.1".

9
Note: For determine the Default Gateway IP, Please refer to Chapter 2.1.2.6 for
reference.
6）Primary DNS Server: input DNS server IP.
7）Secondary DNS Server: input backup DNS server IP.
Parameter settings of Ethernet STA mode
2.1.2.6 Determine the subnet and default gateway IP
Option 1: Getting information from Router setting
1) Launch a web browser（eg."192.168.0.1"）to access the setting page of Wifi Router
according to the installation guide.
Note：the following setting page will be different from othe manufacture bands of router.
2) Find the Login IPAddress.

10
!Note：
(1) "192.168.0.1" is the Default Gateway IP as in WIFI-DALI STA mode setting. The subnet
NO in "192.168.0.1" is "0".
(2) IP address from 192.168.0.2 to 192.168.0.254 is for WIFI-DALI and other networking
equipment.
Option 2: Getting information from network connected PC
1) Click on the network icon on the bottom right corner of
Windows desktop, then click “Open Network and Sharing
Center”.
2) Click “Local Area Connection”.
3) Click “Details…” button from the pop-up dialog window.

11
3) Find the Default Gateway IP and subnet NO.
from the pop-up dialog window.
2.2 Connecting to WIFI-DALI with DALIPRO software
Step 1: Get your PC to access the proper WiFi network which created by a WIFI-DALI
(WIFI-DALI @AP mode) or Wifi router (WIFI-DALI@STA mode).
Step 2: Open DALIPro and select the communication port to “WIFI”, and click “Confirm”.
Step 3: The software will search the available DALI gateway automatically，you may select
one of them then click “connect”.

12
2.3 Connecting to WIFI-DALI with DALINK (Andriod App)

13
2.4 Connecting to WIFI-DALI with DALI Remote (iOS App)