Ledco R8 User manual

R8 R8-1
● Apply to RGB or RGBW LED controller.
Ultra sensitive color adjustment touch wheel.●
● Each remote can match one or more receiver.
● R bC 2032 attery powered.
● Operate with LED indicator light.
User Manual Ver 1.0.7
Technical Parameters
Input and Output
Warranty
5 years
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: R8/R8-1
Features
Page 1
1 and 4 zone RGB or RGBW/Touch color wheel/Wireless remote 30m distance/CR2032 battery
Ultrathin Touch Wheel RF Remote Controller
Output signal RF 2.4GHz( )
Working voltage 3VDC CR2032( )
Working current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
R8,R8-1 Ultrathin Touch Wheel RF Remote Controller
LVDRED
4 Zone RGB/RGBW 1 Zone RGB/RGBW
Mechanical Structures and Installations
9mm
58.5mm
107mm
58.5mm
Operation
● When light is on, touch the color wheel, the indicator will display red.
● To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) on the remote.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
37 .0 0 mm
63 .0 0 mm
68 .0 0 mm
Note: Before the first use,
please remove the protective
film on the battery.
C 2032 BatteryR
Back holder
To fix the remote, two options are offered for selection:
Option 1: fix the remote' back holder on the wall with two screws.
Option 2: adhere the remote' back holder to the wall with paster.

Bright-
Mode
Color wheel
Speed/Saturation
On/Off: Short press turn on/off all zone light.
1,2,3,4 zone: Short press select and turn on zone light, long press 2s turn off zone light.
Short press multiple zone key fastly, will synchronous select multiple zone synchronously.
Color wheel: Touch to change current zone static RGB color.
Mode: Short press run the next dynamic mode, long press 2s run mode cycle.
Bright+/-: Static color, adjust brightness,
short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
Speed+/- : Dynamic mode, adjust speed,
short press 10 levels, long press 2s get the fastest or slowest speed.
W: For RGB light, short press turn on/off white(RGB mix), long press 1-6s adjust saturation continuously,
namely change current static RGB color to mixed white slowly.
For RGBW light, short press turn on/off W channel, long press 1-6s adjust W brightness continuously.
Scene: Short press recall the scene, long press 2s save.
the LED indicator will light up longer when save OK.
4 zone recall or save synchronously.
On/Off: Turn on/off light.
Color wheel: Touch to change static RGB color.
Mode: Short press run the next dynamic mode, long press 2s run mode cycle.
Speed/Saturation: For dynamic mode, adjust speed, short press 10 levels, long press 2s get the default speed.
For static color, adjust saturation, namely change current static RGB color to mixed white slowly,
short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
Bright+/-: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
/ / , R G B: Short press get red green or blue color directly,
long press 1-6s adjust R/G/B brightness continuously to achieve millions of colors.
continuously W+/-: For RGB light, short press turn on/off white(RGB mix), long press 1-6s adjust saturation ,
namely change current static RGB color to mixed white slowly.
For RGBW light, short press turn on/off W channel, long press 1-6s adjust W brightness .continuously
Scene: Short press recall the scene, long press 2s save the current color into the scene.
the LED indicator will light up longer when save OK.
● R8 4 zone RGB/RGBW remote
● R8-1 1 zone RGB/RGBW remote
Bright/Speed-
Mode
4 Zone
Color wheel
1234
R 100%
B 100%
B 100%
R 100%
G 100%
R 100%
G 100%
G 100%
B 100%
On/Off
Bright/Speed+
White
Scene
On/Off
R/G/B/W+/-
Scene
Bright+
Safety information
1 Read all instructions carefully before you begin this installation. .
2 When installing battery, pay attention to the battery positive and negative polarity. .
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4 Gently handle remote, beware of falling..
5. For indoor and dry location use only.
User Manual Ver 1.0.7 Page 2
R8,R8-1 Ultrathin Touch Wheel RF Remote Controller
Key function
Color R/G/B value
Red
Yellow
Green
Cyan
Blue
Purple
B0%G0% R100%
R100%
R0%
R0%
R0%
R100%
G100%
G100%
G100%
G0%
G0%
B0%
B0%
B0%
B100%
B100%