Ledco RT4 User manual

RT4 RT9
● Apply to RGB or RGBW LED controller.
Ultra sensitive color adjustment touch wheel.●
● Independent dimming function of each R, G, B, W channel to achieve millions of colors.
● Each remote can match one or more receiver.
● AAAx2 b attery powered.
● Operate with LED indicator light.
● Magnet on the back which can be stuck on back holder.
User Manual Ver 1.0.7
Technical Parameters
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: RT4/RT9
Features
Page 1
1 and 4 zone RGB or RGBW/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Touch Wheel RF Remote Controller
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
RT4,RT9 Touch Wheel RF Remote Controller
LVDRED
1 Zone RGB/RGBW 4 Zone RGB/RGBW
Mechanical Structures and Installations
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
53.00 mm
122.0 0 mm
17.50 mm
53.50 mm
3VDC(AAAx2) Battery Back holder with magnet
To x the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
Warranty
5 years
Warranty
Input and Output
Output signal RF 2.4GHz( )
Working voltage 3VDC AAAx2( )
Working current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
User Manual Ver 1.0.7 Page 2
RT4,RT9 Touch Wheel RF Remote Controller
● RT4 1 zone RGB/RGBW remote
: For dynamic RGB mode, adjust speed,
short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation,
namely change current static RGB color to mixed white slowly,
short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
:Turn on/off light.
: Short press get 24 kinds static RGB color,
long press for continuous static color adjustment.
: Adjust brightness, short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
1
R 100%
9
G 100%
21
R 100%
B 100%
17
B 100%
25(1)
R 100%
5
R 100%
G 100%
13
G 100%
B 100%
:Touch to change static RGB color.
: Short press recall the scene long press 2s save current color into S1 2 3 4 , ///.
the LED indicator display green when save OK.
: For RGB light, short press turn on/off white(RGB mix),
long press 1-6s to adjust saturation continuously,
namely change current static color to mixed white slowly.
For RGBW light, short press turn on/off W channel,
long press 1-6s to adjust W brightness continuously,
namely change saturation by add white color slowly.
: Short press get red green or blue color directly. ,
long press 1-6s to adjust R/G/B brightness continuously to achieve millions of colors.
: Short press run next dynamic mode, long press 2s run mode-cycle.
S1S2S3S4
R G WB
W
R G B
S1S2S3S4
R G WB
124
3
S1S2
: Short press turn on/off all zone light.
: Short press select and turn on zone light,
long press 2s turn off zone light.
Short press multiple zone key fastly,
will select multiple zone synchronously.
: Touch to change current zone static RGB color.
: Short press recall the scene, long press 2s save current state into S1/S2.
the LED indicator display green when save OK.
4 zone recall or save synchronously.
: For static color, adjust brightness,
short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
For dynamic mode, adjust speed,
short press 10 levels, long press 2s get the default speed.
: For RGB light, short press turn on/off white(RGB mix),
long press 1-6s adjust saturation continuously,
namely change current static RGB color to mixed white slowly.
For RGBW light, short press turn on/off W channel,
long press 1-6s adjust W brightness continuously,
namely change saturation by add white color slowly.
: Short press get red green or blue color directly , .
long press 1-6s adjust R/G/B brightness continuously
to . achieve millions of colors
: Adjust dynamic mode for current selected zone,
Short press run next dynamic mode, long press 2s run mode-cycle.
124
3
R G B
W
S1S2
● RT9 4 zone RGB/RGBW remote
Key function