Ledvance MS-CV-DIM-RF User manual
Cyan Magent Yellow Black
score dimension 148 x 210 mm
LEDVANCE VALUE RGB Remote
Controller
MS-CV-DIM-RF 12/24V RGB RM
Features
• Battery cell is not included in the selling package.
• Recommended battery cell type: 3v 2032 Lithium battery cell.
• Up to 30 meters connection range between the nearest LEDVANCE Value RGB Dimming Controller and the
remote controller
• Perfectly compatible to work with LEDVANCE Value RGB Dimming Controller
(Model: MS-CV-DIM-RF 12/24VRGB)
• Each remote controller can pair up with one or many LEDVANCE Value RGB Dimming Controllers
• Red indication light would be light-on if any button on the remote controller is pressed in order to provide basic
user interaction experience
• 4 zones of dimming controllers can be controlled by 1 remote controller seperately thereby users would not be
bothered by too many remote controllers on hand
• Up to 10 pre-design modes are provided to fulfill various enquiries of the automatical RGB performance
Technical Parameters
Mechanical Structures and Installations Guide
Input and Output
Output signal RF(2.4GHz)
Working voltage 3VDC
Working current <5mA
Standby current <10μA
Standby time 1 year
Remote distance 30m
Environment
Operation temperature Ta:-30°C~+55°C
Case temperature (Max.) Tc:+85°C
IP rating IP20
CR2032 Battery
Back holder
Note: Please install the 3V 2032
battery cell first inside the battery
case at the back side before using
the remote controller.
How to fix the back holder of remote controller at somewhere if you are worried about missing it?
a. Fix the back holder on the wall with 2 screws;
b. Use the adhesive back tape to fix the back holder on the wall.
WARNING:
NOT FOR PRINT
PRODUCTION!
This PDF file is for reference only and not to
be used for the creation of production art.
Colour printouts and screen displays should
not be used for colour approval as colours
may vary from device to device. The colour
values for this file are defined in either
Pantone (PMS), HKS, or in process colours
(CMYK).
For obtaining hard-copies in actual size (1:1)
you need to enter the proper settings in your
printer options.
㮍⥠⋀⢏⠐⛛䤢⍗
弜⣩
㦻3')㠖㖰⅔⇫♑䏶㠖ↅ᧨ ₜ厌⺕㦻㠖㫲䞷
ℝ◿Ⓠ䞮ℶ㒥劔Ⓟ⇫嚁㨦ᇭ
㦻㠖㫲䤓ㇸ唁㓢◿䓗㦻㒥␅⦷䟄厠⻞ヤ₼㣍䯉
䤓唁ㇸ᧨ₜ♾䞷ℝ㦏兗䤓唁ㇸ♑䏶ᇭ⥯䫻ↅ
㒥幍䤓ぽ㆑᧨♾厌抯㒟唁ㇸ䤓⋞ぽᇭ㦏兗㷲
㆞䤓唁ㇸ庆挄䏶䟀唁㨎◰䓖306᧨
+.6㒥劔&0<.槡儱煓煠`㓏⸩䤓唁ㇸᇭ
啴㦻㠖㖰䤓㓢◿ↅ尐噆♥ 䤓☮ⱚ⻉⺇᧨權
⦷㓢◿折欈₼⇫⒉䦇ㄣ䤓幍函ᇭ
11079027 MS-CV-DIM RF 12_24V RGB RM UI LEDV v2.indd 1 28/6/2019 1:32 PM
2
LEDVANCE VALUE RGB Remote Controller LEDVANCE VALUE RGB Remote Controller
Cyan Magent Yellow Black
score dimension 148 x 210 mm
Match Remote Control (two match ways)
Simple guide of pairing up and unting the remote controllers and dimming controllers
Method A - Use match button
Shortly press the match button on the dimming controller and the signal blue light on the dimming controller will
start to flicker;
Immediately press “1” or other number of zone button on the remote controller;
Method B - Restart the power
Turn off the power and turn on the power;
Immediately press “1” or other number of zone button on the remote controller for 3 times;
When the blue signal light on the dimming controller flickers quickly for 3 times, the dimming controller and
remote controller are pair-up successfully.
Guide of unting the remote controllers and dimming controllers
Method A - Use match button
Press the match button continously for 5 seconds.
Method B - Restart the power
Turn off the power and turn on the power again.
Immediately press the “1” or other number of zone button on the remote controller for 5 times.
The remote controller would be untied with the dimming controller after the blue signal light flickers 5 times.
Application highlights for standby mode
! To extend the battery life, the stepless color touching wheel will be in sleeping mode that any touches on the
color wheel would not trigger the stepless color change.
! To terminate the sleeping mode, you may press any other button except the on/off button to wake it up, thereby
you can use the color wheel to change the colors according to the instruction.
11079027 MS-CV-DIM RF 12_24V RGB RM UI LEDV v2.indd 2 28/6/2019 1:32 PM
3
LEDVANCE VALUE RGB Remote Controller
Cyan Magent Yellow Black
score dimension 148 x 210 mm
Key function
On/Off: Shortly press to turn on or turn off the lights from zone 1 to zone 4;
1,2,3,4 zone setting: Shortly press the selective number of zone button, the strip in this zone will be lighted on.
Press and hold on for 2 seconds for selective zone button will turn off the strips within this zone. Please note
that the zone setting should be done whilst pairing up the remote controller and the LEDVANCE Value Dimming
Controller.
Color wheel: By touching and moving on the color wheel, various types of color temperature can be demostrated
accordingly.
Mode: Short press run the next dynamic mode, long press 2s run mode cycle.
Bright+/-: Shortly press the 2 buttons can reduce or increase the lighting output of the strips. Users can also
press the button continously for 1-6 seconds to enjoy the continously dimming functions up to 256 levels.
Speed+/- : Dynamic mode, adjust speed,
short press 10 levels, long press 2s get the fastest or slowest speed.
W: For RGB light, short press turn on/off white(RGB mix), long press 1-6s adjust saturation continuously,
namely change current static RGB color to mixed white slowly.
For RGBW light, short press turn on/off W channel, long press 1-6s adjust W brightness continuously.
3 memory scene: Users can save the demostration as memory scene by pressing the button for 2 seconds. Once
users wonder to demostrate the scene again, they can shortly press the button to recall the saving scene. Please
note that 4 zones of setting would be recalled or saved synchronously.
Bright/Speed –
Model
4 Zone
Color Wheel
1234
R 100%
B 100%
R 100%
G 100%
B 100% G 100%
R 100%
G 100%
B 100%
On/Off
Bright/Speed +
White
Scene
11079027 MS-CV-DIM RF 12_24V RGB RM UI LEDV v2.indd 3 28/6/2019 1:32 PM
Cyan Magent Yellow Black
score dimension 148 x 210 mm
www.ledvance.com
C10449057
G11079027
2019-06-28
Warnings
a Please read all the instructions carefully before you start to do any installation
b Please pay attention to the polarity of the battery cell before inserting the battery cell inside the remote controllers
c If you will not use the remote controllers for a long time, please kindly remove the battery to avoid the potential
damage to the remote controller caused by expiration of battery cell
d If the sensitivity of the remote controller becomes worse and worse when none of the signal amplifier is installed
in the communication area, please consider to change the battery cell
e If you cannot give any instruction to the dimming controllers and the strip, please kindly re-do the pairing up
following the guide in this sheet
f Please do not throw the remote controller hardly on floor or walls. Any intensive physical damage made by users
will not be secured for warranty replacement
g Please only use the remote controller within indoor area. The dimming controllers and remote controllers are not
suitable for any outdoor application and environment
剽䗞♰倛撑僈剣ꣳⰖ
䎛⚎溁⡱㿋䋑犤㙹⼓䊨⚌⻌騟1〿⛓♧
齱綘: 528000
㹐剪掚絁: 400 882 1830
www.ledvance.com.cn
LEDVANCE Pte Ltd.
988 Toa Payoh North, # 03-06,
Singapore 319002
LEDVANCE Sdn, Bhd. (1166537-U)
100.7.009, 129 Oces, Block J, Jaya One
No. 72A, Jalan Universiti,
46200 Petaling Jaya,
Selangor Darul Ehsan, Malaysia
LEDVANCE Pvt. Ltd.
1201-1202, 12th Floor, Signature Towers, Tower - A,
South City - I, Gurugram - 122001, Haryana (India)
Consumer care (Name and address as per above),
Consumer care Tel. No. 0124-4150100
E-mail id: customercar[email protected]
www.ledvance.in
࣯ԦҖؓݛ
۰ࡌݤʈΧ˱۔۽Ի554ࠖ۽ٻҪ6
ࡉء06165
ࢷء: +82 80 4891 700
www.ledvance.co.kr
LEDVANCE Prosperity Co. Ltd.
Room 4007-4009 Oce Tower,
Convention Plaza, 1 Harbour Road,
Wanchai, Hong Kong
LEDVANCE Middle East FZE
Jebel Ali Free Zone
JAFZA 16, Oce 603
P.O. Box 17476, Dubai – UAE
LEDVANCE Pty Ltd
ABN 34 050 103 181
Suite 2.1A
394 Lane Cove Road
Macquarie Park NSW 2113,
Australia
Ph +61 29481 8399 / 1300 467 726
www.ledvance.com.au
11079027 MS-CV-DIM RF 12_24V RGB RM UI LEDV v2.indd 4 28/6/2019 1:32 PM
Other Ledvance Remote Control manuals
