Ledwide Lighting LW-TR35 User manual

Aluminum Profile Weight:0.62kg/m
LW-TR35
LEDWIDE LIGHTING CO.,LTD
LEDWIDE
NEW
ACCESSORIES :
Tel: [phone] Direct: 0086 0 18680360436 Fax: [phone] E-mail: [email protected] www.ledwide.com
Address:1-2/F, Building A2,Sinopol Ind.Park, First Industrial Zone, BaiHua communities, Guangming New District, Shenzhen, P.R. China Postcode: 518107
Stocked length availability:2m,2.5m.
Customized length below 6m upon your request.
<38.4W/m
Alum. Trimless bar
Code: LW-TR1
Stainless Steel L bracket
Code: LW-LMB
Aluminum Endcap
(without hole)
Code: WN35-Cap
Aluminum diffuser
Code: WN35-AD
Spring Clip
Code: SC-N31
35
50
31
37.5
48
Aluminum Endcap
(without hole)
Code: TR35-Cap
Alum. bridge base
Code: LW-AB35
Optional Diffuser(PMMA)
Opal Milky Frosted Clear
31mm
Max strip width
50*48
Dimensions(mm)
Code D005-O D005-M D005-F D005-C
Light Transmittance 63% 78% 89% 95%
D005 type
60°
PAGE 1

Installation Instructions for the Housing
0.5-0.7m
1.0m
The thickest ceiling: 16mm
The thinnest ceiling: 0mm
1. Assemble the AB and TR1 into each other as pictured above, followed by the end caps into place. Ensure the AB clamps are placed
between 50-70cm apart.
2. Adjust and install the L brackets according to ceiling board thickness.
LW-AB35
LW-TR1
LW-LMB
PAGE 2

Installation Instructions for the Housing
3. Cut out required hole
5. Patch up imperfections with ceiling plaster.
123
4. Insert the housing sideways into the cut-out hole, then rotate it until it lays flat on the ceiling board. Secure with screws from the
underside of the ceiling board (ceiling surface).
PAGE 3

Installation Instructions for the linear light
6. Using compatible linear profiles, prepare the light for install as below.
7.Install finished.
321
Spring Clip*2
LED Power Supply
1.0m
PAGE 4

LW-AB60
78.9mm
12mm
LW-AB35
53.9mm
12mm
LW-AB50
12mm
68.9mm
12mm
98.9mm
LW-AB80
Compatible Profiles - E50, E60, E80
50mm
65mm
75mm
95mm
PAGE 5