legate LGK-0010 Assembly instructions

SMART POWER STRIP
Legate Smart Plugs & Switches
Manual Guide

Let’s Get Started.
Install the app
Download the Legate Smart Home app
from Google Play or the App Store on a
compatible phone or tablet.
1
Register and login
Register on the app by using your contact
number or Email address.
2
Connect to wifi
Make sure that your mobile phone and
smart device are connected to 2.4 GHz
wifi network.
3
*note: The distance between the phone and smart device should not be greater
than 4meters while pairing both devices. If the signal is week you’ll need a wifi
booster. (Recommended Wifi Booster Version: TP LINK TL-WA855RE)

Legate Smart Power Strip
to Legate Smart Home App

Getting the Smart Device Ready
Legate Smart Power Strip - Connecting the Smart Device to Legate Smart Home app
1
Plug the Smart Power Strip
into a power outlet.
2
Press and hold the ON/OFF Button
for 5s until the indicator light blinks.

Add Smart Device
3
Open Legate Smart Home app,
Click “+” or Add Device.
4
Under “Electrical Engineering” tab
Click “Power Strip (Wi-Fi)”.
Legate Smart Power Strip - Connecting the Smart Device to Legate Smart Home app

Network Configuration
6
Enter your Wifi Password. Then
click “Confirm” button.
(note: Only 2.4 GHz Wifi network are supported)
Legate Smart Power Strip - Connecting the Smart Device to Legate Smart Home app
5
Click “Confirm indicator rapidly
blink”button.

Network Configuration
7
Wait for the Smart Device
connects to the app.
8
Click “Done” button when the Smart
Device is successfully added.
(note: You can change the device’s name)
Legate Smart Power Strip - Connecting the Smart Device to Legate Smart Home app

Legate Smart Power Strip
Features

Main Function
Legate Smart Power Strip - Features
(note: You can change the switches’
name and turn On or Off individually )
On/Off Button Set Coundown timer to
automatically turn off the
Smart Plug.
Add Schedule to automatically
On or Off the Smart Plug.

Push Notification
Enable to turn off the notification.
Legate Smart Power Strip - Features
1
Click “Me” button on Legate
Smart Home app. Then click
“Settings”.
2
Click “Push Notification”
tab.
3
Can turn on or turn off the
“Enable notification”
1
Click “Me” button on Legate
Smart Home app. Then click
“Settings”.
2
Click “Push Notification”
tab.
3
Can turn on or turn off the
“Enable notification”

Remove Device from Legate Smart Home app
The device will restore to default settings.
Legate Smart Power Strip - Features
1
Click “ ” button on upper
right corner of Smart Power
Strip’s main page.
2
Click “Remove Device”
tab.
3
Click “Confirm” button to
completely remove the device
from the Legate Smart Home app.
...

Legate Smart Power Strip
Configuration & Specifications

Product Configuration
Legate Smart Power Strip - Configurations & Specifications
Press and hold the ON/OFF Button for 5 seconds until the Light Indicator blinks. Then
the device will be automatically removed to the Legate Smart Home app.
Reset:
ON/OFF Button
Light Indicator

Specifications
Product Model
Rated Voltage
Rated Current
Usb Output
Power Cable
Ouput Port
Wireless Type
Free app
Support systems
Voice Control
SA-P302B
AC100V - 240V
50 / 60Hz
10A
5V/2.1A
3USB
2.4GHz 802.11b / g / n wireless network
Legate Smart Home
IOS 7.0 or above, Android 4.0 or above
Google Home
:
:
:
:
:
:
:
:
:
:
Legate Smart Power Strip - Configurations & Specifications

Your one stop shop for all your Smart Home needs
www.legate.com.sg