LEGRAND 0 500 91 User manual

Cat. No(s): 0 500 91/93/95/97 - 0 502 95/97
Technical data sheet: F01193EN/03 Updated: 28/11/2016 Created: 07/09/2010
1/2
Multi-outlet extensions for comfort and safety
with rotating 2 P+E - 16 A socket unit
with overload indicator or surge protective device
Franco-Belgian standard
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel.: 0 ([phone] - Fax: 0 ([phone]
www.legrand.com
3. DIMENSIONS (mm)
4. OPERATION
Multi-outlet extensions equipped with:
- 16 A shuttered sockets tested to withstand 10,000 operations.
- 16 A (resistive), 4 A (motor load) switches with indicator, which can be
operated by hand or foot.
- Optimum space between 2 sockets for connecting transformers, chargers.
- Self-locking cable tie to hold the cords together.
- Socket unit can be rotated between its xing supports.
- Can be xed with screws..
1. USE
Multi-outlet extensions for comfort and safety: 4 and 6 Franco-Belgian
standard shuttered sockets.
Socket unit which pivots on its axis, incorporating a switch with indicator.
Supplied with self-locking cable tie to hold the cords together. 1.5 m and
3 m power supply cord (3 G 1.5 mm2) - 2 P+E - 16 A - max. power 3680W
at 230 V.
- With overload indicator: equipped with a load indicator displaying
the power consumption of connected appliances - Circuit breaker with
manual reset - 4 x 2 P+E and 6 x 2 P+E.
- With surge protective device: Protects electrical and electronic
appliances (TV, Hi-Fi system, computer, etc.) from lightning and
overvoltages. With LEDs indicating the surge protective device status
(on: appliances protected, o: surge protective device not working,
extension needing to be replaced) - 4 x 2 P+E and 6 x 2 P+E.
2. RANGE
0 500 93
B
78
90
A
63
32
No. of sockets Cat. Nos. A B
4
0 500 91
0 500 95
0 502 95
315 293
6
0 500 93
0 500 97
0 502 97
410 388
2P+E comfort socket units with overload indicator
Cable length 1.5 m - 3 G - 1.5 mm2
White/Grey
Unit with four 2 P+E comfort sockets 0 500 91 -
Unit with six 2P+E comfort sockets 0 500 93 -
2P+E comfort socket units with surge protective device
Cable length 1.5 m - 3 G - 1.5 mm2
White/Grey Black
Unit with four 2 P+E comfort sockets 0 500 95 0 502 95
Unit with six 2P+E comfort sockets 0 500 97 0 502 97

2/2
Cat. No(s): 0 500 91/93/95/97 - 0 502 95/97
Multi-outlet extensions for comfort and safety
with rotating 2 P+E - 16 A socket unit
with overload indicator or surge protective device
Franco-Belgian standard
Technical data sheet: F01193EN/03 Updated: 28/11/2016 Created: 07/09/2010
4. OPERATION (continued)
 4.1 Surge protective device characteristics
- The role of the surge protective device is to minimize overvoltages,
regardless of their origins, at the terminals of an installation or any
electrical/electronic equipment. To do this, it needs to absorb as much
energy as possible. The surge protective device can protect your
sensitive appliances and thus prevent irreparable damage to expensive
equipment (computer, TV, hi-, DVD players, etc.).
 4.2 Circuit breaker operation
- Risks associated with electricity consumption overload:
Electricity consumption overload occurs when the power required by
all the connected appliances exceeds the maximum power the multi-
outlet extension can withstand. The resulting temperature rise could
potentially cause a re.
- The Safe Control System, a Legrand innovation, prevents the
maximum power the multi-outlet extension can deliver being exceeded.
It indicates the power consumption level. In the event of an overload, the
thermal protection trips and cuts the power supply to the multi-outlet
extension in order to guarantee your safety.
5. TECHNICAL CHARACTERISTICS
 5.1 Mechanical characteristics
Impact resistance: IK 04
Resistance to ingress of solid bodies and liquids: IP 20
 5.2 Material characteristics
Polypropylene unit
Reinforced polyamide shutter
Self-extinguishing:
- 750°C/30 s for parts made of insulating materials holding live parts in
place
- 650°C/30 s for other insulating components
 5.3 Climate characteristics
Operating temperature: - 5° C to + 35° C
6. APPROVALS AND QUALITY MARKS
- Switch with integrated indicator: VDE, S, N, D, Fi, (Germany, Sweden,
Norway, Denmark, Finland, Switzerland) in accordance with standard
IEC 61058.1.
- Thermal protection: VDE in accordance with DIN EN 60934
• Uc: 250 V - 50 Hz
• Uoc: 4 kV
• In: 2 kA
• 3500 W - 230 V~
• Icc: 3 kA
• Imax: 4 kA
• Up: 1 kV
Up = 1 kV
D
C
A
CLAC
A + B +... < 3500 WOK
A + B + C + D > 3500 W
1
OK

Protection
by thermal
circuit breaker