LEGRAND bticino FL4648W User manual

Cat. No(s): 0 487 71/81
FL4648/48W/58
1/3
RFID keycard reader
BUS/SCS
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel: [phone] Fax: [phone]
www.legrand.com
Technical data sheet: S000101015EN-1 Updated: 26/03/2018 Created: 20/03/2018
This is an RFID keycard reader (13.56 MHz) located at the entrance to the
room which can, by inserting an RFID keycard in the appropriate slot:
- indicate someone is in the room
- trigger a “welcome” scenario
And by removing it:
- indicate no one is in the room
- trigger a “goodbye” scenario
It indicates and can be used to activate the housekeeping information:
- Do Not Disturb
- Make Up Room
- Extra service, for example picking up laundry (only available on
congured version)
The card position is indicated by arrows (illuminated ashing path).
It has a proximity sensor which can be disabled by conguration: when
the device detects an approach, it switches from standby state to active
state. The LED brightness level (on standby or active) can also be set by
conguration.
It can be congured using the MyHOME_Suite software, which can be
downloaded from the website www.homesystems-legrandgroup.com.
It can also be used for IP installations which include controller
0 484 08/12, and can be congured with the Hotel Room Conguration
Software available on the website www.legrandoc.com.
1. DESCRIPTION
Key
1. MUR indicator (green LED on = MAKE UP ROOM)
2. DND indicator (red LED on = DO NOT DISTURB)
3. Keycard slot indicator
4. BUS/SCS plug-in connector
Front view Rear view
5
4
CONTENTS Page
1. Description....................................................................1
2. Technical characteristics...........................................1
3. Standards, certifications and markings..............1
4. Dimensions ...................................................................1
5. Wiring..............................................................................2
6. Installation.....................................................................2
7. Configured version Cat. No. 0 487 81/FL4658... 3
2. TECHNICAL CHARACTERISTICS
BUS/SCS power supply: 18 - 27 VDC
Standby consumption: 12 mA
On-load consumption: 25 mA
RFID frequency: 13.56 Mhz
Operating temperature: 0°C to +40°C
Storage temperature: -20°C to +70°C
Protection index: IP 20, IK 04
Plate and surround colour: Black Cat. No. 0 487 71/FL4648
or white Cat. No. FL4648W
3. STANDARDS, CERTIFICATIONS AND MARKINGS
EN 60669-2-5
CE marked
4. DIMENSIONS
129 49
18.1
93
1
2 4
3

2/3
CONTENTS
RFID keycard reader
BUS/SCS
Technical data sheet: S000101015EN-1 Updated: 26/03/2018 Created: 20/03/2018
Cat. No(s): 0 487 71/81
FL4648/48W/58
5. CABLING
BUS/SCS
6. INSTALLATION
6 890 07
0 800 41
503E
0 487 79


99
136.5




Surface-mounted installation With accessory Cat. No. 0 487 88

3/3
CONTENTS
RFID keycard reader
BUS/SCS
Technical data sheet: S000101015EN-1 Updated: 26/03/2018 Created: 20/03/2018
Cat. No(s): 0 487 71/81
FL4648/48W/58
- Extra service
- Empty
- Do not disturb
- Empty
Choice of plate colour Options (predened position):
- Hotel logo
- Flush-mounted version
- Make up room
- Empty
7. CONFIGURED VERSION CAT. NO. 0 487 81/FL4658
The congurator is available on the following website: www.uxforupscalehotel.legrand.com.
The list of pictogram and colour options (plate and surround) can be accessed via the congurator.
Choice of
surround colour